Page 2 - Contents; Technical specifications
This appliance complies with the following E.E.C. Directives:- 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;- 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications. Important safety information 3 Description of the appliance 3 The control pa...
Page 3 - Important safety information
It is most important that this instruction book should be retained with the appliance for future reference. Should theappliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensurethat the book is left with the appliance in order that the new owner...
Page 4 - The control panel
1. On/Off indicator light 2. On/Off push button 3. Indicator lights Open doorIlluminates when the door has not been properly closed. SaltIlluminates when the salt has run out, to remind you to refill the salt container. Water tapFlashes when:- The water tap is closed.- The mains water supply has bee...
Page 5 - Audible signals
Audible signals Audible signals have been introduced to help indicate whichoperations the dishwasher is performing. Short "instruction accepted" signal When any of the push buttons are pressed (except theOn/Off push button), a short audible signal informs you thatthe machine has accepted the...
Page 6 - Setting the water softener; To select a different level proceed as follows:; Filling with salt; Before use
Before using your dishwasher for thefirst time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5. Fill...
Page 7 - Adjusting the dose; Use of detergent; If using powder detergents proceed as follows:; Compact detergents with enzymes
Rinse aid Rinse aid is automatically added during the last rinse,ensuring thorough rinsing, and spot and streak free drying.The dispenser, which is positioned inside the door, holdsabout 110 ml of rinse aid, which is sufficient for 16 - 40dishwashing programmes, depending upon the dosagesetting. Fil...
Page 8 - Loading your appliance; The lower basket; The cutlery basket; Removable knife basket; The upper basket; Using your appliance
Loading your appliance Before placing dishes in the machine, remove any scraps offood, to avoid clogging the filters and consequently reducingthe performance. Do not load very small items which can fall through thebaskets. Open the door and slide out the baskets to load the dishes. The lower basket ...
Page 10 - Hints and tips
To save energy Place dishes in the machine immediately after every meal andwait until the dishwasher is full before washing. Do not prewash dishes under running water. Select the DAILY 30 I programme when dishes are not very soiled, following the instructions given in the "Washingprogrammes"...
Page 11 - Washing programmes
* Ideal for washing a complete load of 12 place settings with normal soil. Characterised by a duration of about 80 minutes and a washing temperature of 70°C. The time value is approximated and depends on the pressure and the temperature of the water and also by the variations of the power supply. **...
Page 12 - Operating sequence
1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Press the On/Off push button The display will show the last selected programme and the corresponding phase indicator lights will illuminate.If the door is open also the "open door"...
Page 14 - Maintenance and cleaning
Internal cleaning Ensure that the seals around the door, the detergent and rinseaid dispensers are cleaned regularly with a damp cloth.We recommend the use of Finish Dishwasher Cleaner every3 months or run a 65°C wash without dishes using detergent.Regular use of Finish Dishwasher Cleaner cleans ina...
Page 15 - Something not working; Symptom
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems.If the dishwasher will not start or stops during...
Page 16 - Protection against flooding; Service and Spare Parts
If after all these checks, the problem persists, contact yourlocal Service Force Centre, quoting the model and serialnumber. This information can be found on the rating platelocated on the right hand side of the dishwasher door (seepicture). Protection against flooding The machine is fitted with a d...
Page 17 - European Guarantee; Guarantee Conditions
17 Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part thereof is proved to bedefective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGEfor labour, ...
Page 18 - Hints for test centres
18 Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser. Test standard EN 50242 Reference programme: Programme 6 - Bio 50°C with prewash Load: 12 standard place settings Rinse aid selector: position...
Page 19 - Installation instructions
Any electrical work required to install this applianceshould be carried out by a qualified electrician orcompetent person. Any plumbing work required to install this applianceshould be carried out by a qualified plumber or competentperson. Remove all packaging before positioning the machine. If poss...
