Zanussi ZDI 6895 SX - Manuals

Audible signals Audible signals have been introduced to help indicate whichoperations the dishwasher is performing. Short "instruction accepted" signal When any of the push buttons are pressed (except theOn/Off push button), a short audible signal informs you thatthe machine has accepted the...

Before using your dishwasher for thefirst time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5. Fill...

Rinse aid Rinse aid is automatically added during the last rinse,ensuring thorough rinsing, and spot and streak free drying.The dispenser, which is positioned inside the door, holdsabout 110 ml of rinse aid, which is sufficient for 16 - 40dishwashing programmes, depending upon the dosagesetting. Fil...

Loading your appliance Before placing dishes in the machine, remove any scraps offood, to avoid clogging the filters and consequently reducingthe performance. Do not load very small items which can fall through thebaskets. Open the door and slide out the baskets to load the dishes. The lower basket ...

To save energy Place dishes in the machine immediately after every meal andwait until the dishwasher is full before washing. Do not prewash dishes under running water. Select the DAILY 30 I programme when dishes are not very soiled, following the instructions given in the "Washingprogrammes"...

* Ideal for washing a complete load of 12 place settings with normal soil. Characterised by a duration of about 80 minutes and a washing temperature of 70°C. The time value is approximated and depends on the pressure and the temperature of the water and also by the variations of the power supply. **...

1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Press the On/Off push button The display will show the last selected programme and the corresponding phase indicator lights will illuminate.If the door is open also the "open door"...

Internal cleaning Ensure that the seals around the door, the detergent and rinseaid dispensers are cleaned regularly with a damp cloth.We recommend the use of Finish Dishwasher Cleaner every3 months or run a 65°C wash without dishes using detergent.Regular use of Finish Dishwasher Cleaner cleans ina...

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems.If the dishwasher will not start or stops during...

If after all these checks, the problem persists, contact yourlocal Service Force Centre, quoting the model and serialnumber. This information can be found on the rating platelocated on the right hand side of the dishwasher door (seepicture). Protection against flooding The machine is fitted with a d...

17 Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part thereof is proved to bedefective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGEfor labour, ...

18 Hints for test centres Before starting any test it is necessary to fill completely with salt the salt container and with rinse aid the rinse aid dispenser. Test standard EN 50242 Reference programme: Programme 6 - Bio 50°C with prewash Load: 12 standard place settings Rinse aid selector: position...

Any electrical work required to install this applianceshould be carried out by a qualified electrician orcompetent person. Any plumbing work required to install this applianceshould be carried out by a qualified plumber or competentperson. Remove all packaging before positioning the machine. If poss...