York TCHD18 THRU 60 - Manual
York TCHD18 THRU 60 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Johnson Controls Unitary Products; Physical and Electrical Data
- Page 3 – System Charge for Various Matched Systems; Outdoor Unit
- Page 4 – System Charge for Various Matched Systems (Continued)
- Page 5 – COOLING CAPACITY - With Air Handler Coils
- Page 7 – COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils
- Page 8 – COOLING CAPACITY - With High Efficiency Motor Furnaces
- Page 9 – COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
- Page 17 – ACCESSORIES; Refer to Price Manual for specific model numbers.; Hard Start Kit; provides increased starting torque for areas with low voltage.; Off Cycle Timer Delay; vent rapid recycling of the compressor.; Thermostats; - Compatible thermostat controls are available; TYPICAL INSTALLATION; Model
- Page 18 – COOLING PERFORMANCE DATA
TECHNICAL GUIDE
HORIZONTAL DISCHARGE
AIR CONDITIONERS
13 SEER – R-410A
MODELS:
TCHD18 THRU 60
(1.5 THRU 5 NOMINAL TONS, 1 PHASE)
Due to continuous product improvement, specifications
are subject to change without notice.
Visit us on the web at www.york.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY
Standard 5-year limited parts warranty.
Standard 510-year limited compressor warranty.
Extended 10-year limited parts warranty when product is
registered online within 90 days of purchase for replace-
ment or closing for new home construction.
LISTED
556454-YTG-A-0210
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
DESCRIPTION
The 13 SEER Series condensing unit is the outdoor part of a
versatile system of air conditioning. It is designed to be custom-
matched with one of UPG’s complete line of evaporator sec-
tions, with each serving a specific function. Matching Air Han-
dlers are available for upflow, downflow, or horizontal
applications to provide a complete system. Electric Heaters are
available, if required. Add-On coils are available for use with
upflow, downflow, or horizontal furnaces and air handlers.
FEATURES
•
Performance
-
Efficiency levels from 13.0 SEER/11.5 EER
with a loose coil and up to 15.5 SEER/13.5 EER when cou-
pled with a variable speed indoor blower.
•
Easy to Install
-
Compact “slim-line” design allows for easy
installation in tight spaces. Units can be stacked.
•
Lower Installation Cost
-
Installation time and costs are
reduced by easy power and control wiring connections. The
unit contains enough refrigerant for matching indoor coils
and 15 feet of interconnecting piping.
•
Quiet Operation
-
Levels as low as 67 dBA. High efficiency
scroll compressor and swept wing fan design reducing oper-
ating sound to a mere whisper.
•
State Of The Art Coil Technology
-
Micro-channel (MC2)
aluminum coil technology provides enhanced capacities and
efficiencies plus the benefit of maximum corrosion protection
especially in coastal applications (up to 7 times greater cor-
rosion resistance than conventional copper tube and alumi-
num fin coils).
•
Compressor Protection
-
The compressor is internally pro-
tected against high pressure and temperature. This is
accomplished by the simultaneous operation of high pres-
sure relief valve and a temperature sensor which protects the
compressor if undesirable operating conditions occur. A liq-
uid line filter-drier further protects the compressor.
•
Durable Cabinet
-
Heavy-gage steel cabinet and a tubular
base rail provide added support.
•
Durable Finish
-
Automotive quality finish provides the ulti-
mate protection from harmful U.V. rays and rust creep ensur-
ing long-lasting high quality appearance. A powder-paint
topcoat is applied over a baked-on primer, using a galva-
nized, zinc coated steel base material. The result is a finish
that has been proven in testing to provide 33% greater dura-
bility than conventional powder-coat finishes.
•
Aesthetic
-
Powder paint “Champagne” Color provides an
attractive retail finish.
•
Low Maintenance
-
Long life permanently lubricated motor-
bearings need no annual servicing.
•
Easy Service Access
-
Fully exposed refrigerant connec-
tions and a single panel covering the electrical controls make
for easy servicing of the unit.
•
Secured Service Valve
-
Secured re-usable service valves
are provided on both the liquid and vapor sweat connections
for ease of evacuating and charging.
•
Other Features:
- Factory supplied filter drier
- High pressure switch, low pressure switch
- Accumulator and crankcase heater in all sizes
- Up to 200’ line set out of the box
- Zero lot line clearances (6” clearance in either direction)
•
Agency Listed
-
U.L. and C.U.L. listed - approved for out-
door application. The unit is certified in accordance with the
Unitary Small Equipment certification program, which is
based on ARI Standard 210/240.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
556454-YTG-A-0210 2 Johnson Controls Unitary Products All dimensions are in inches. They are subject to change without notice.Certified dimensions will be provided upon request. . Physical and Electrical Data MODEL TCHD18 S41S3 TCHD24 S41S3 TCHD30 S41S3 TCHD36 S41S3 TCHD48 S41S3 TCHD60 S41S3 Unit Su...
556454-YTG-A-0210 Johnson Controls Unitary Products 3 System Charge for Various Matched Systems Outdoor Unit TCHD18S41S3 TCHD24S41S3 TCHD30S41S3 TCHD36S41S3 TCHD48S41S3 TCHD60S41S3 Required Orifice or TXV 1 1TVM4F1 1TVM4F1 1TVM4G1 1TVM4G1 1TVM4J1 1TVM4K1 Factory Charge, lbs-oz 2 - 14 3 - 5 4 - 0 4 -...
556454-YTG-A-0210 4 Johnson Controls Unitary Products PROCEDURES: 1. Unit factory charge listed on the unit nameplate includes refrigerant for the condenser, the smallest evaporator and 15 feet of interconnecting line tubing. 2. Verify the TXV and additional charge required for specific evaporator c...
