Yamaha YAS 108 - User Manual
Yamaha YAS 108 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Preparing the firmware
- Page 3 – Updating the unit’s firmware; Plug the power cable into an AC wall outlet.
- Page 4 – Disconnect the USB flash drive.; NOTICE
- Page 5 – Troubleshooting
1
This Guide provides instructions for updating firmware with a
USB flash drive on the following products.
• YAS-108
• ATS-1080*
* Sold only in certain countries or regions
See product pages on the Yamaha website for details regarding
the issues resolved, and functions added, by updating firmware.
Equipment required for
firmware update
Prepare the following items before attempting to update firmware.
• USB flash drive
Use a USB flash drive that meets all of the following
requirements.
– Supports the USB mass storage device class
– Formatted in FAT16 or FAT32 format
– No encryption applied
– No data stored on the device (empty)
• Computer that can be connected to the Internet
Download the firmware from the Yamaha website.
Update Guide
Manual Development Group
© 2018 Yamaha Corporation
Published 02/2020 NVOD-B0
AV17-0324
EN
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Yamaha YAS 108
Summary
2 Preparing the firmware 1 Download the latest version of firmware from the Yamaha website to a computer. See product pages on the Yamaha website for more information. 2 Decompress the downloaded file and save the firmware data file to the USB flash drive. The compressed file contains multiple data ...
3 Updating the unit’s firmware 1 Turn off the unit. 2 Unplug the power cable from the AC wall outlet. 3 Connect the USB flash drive to the UPDATE ONLY jack on the unit. YAS-108ATS-1080 4 Plug the power cable into an AC wall outlet. 5 Touch and hold and together for at least 3 seconds. The firmware u...
4 6 Touch when the firmware update is complete. The unit will turn off. 7 Disconnect the USB flash drive. The firmware update has been completed. NOTICE Do not unplug the power cable or disconnect the USB flash drive until the following procedures are completed.
