Xerox 8400 - Manual
Xerox 8400 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Windows 98 and Windows Me; Quick CD-ROM Install Steps; Printer Installer and Utilities CD-ROM; Note; Other Methods of Installation; Xerox TCP/IP Port Monitor
- Page 3 – PhaserPort Software
- Page 4 – Windows 98 and Windows Me Troubleshooting; User Documentation CD-ROM; Verifying Settings
Phaser® 8400 Color Printer
Copyright © 2003 Xerox Corporation. All Rights Reserved.
3-25
Windows 98 and Windows Me
This topic includes:
■
"Preliminary Steps" on page 3-25
■
"Quick CD-ROM Install Steps" on page 3-26
■
"Other Methods of Installation" on page 3-26
■
"Windows 98 and Windows Me Troubleshooting" on page 3-28
Preliminary Steps
1.
Verify that the printer is plugged in, turned on, and connected to an active network.
2.
Verify that the printer is receiving network traffic by monitoring the LED’s on the back of
the printer or on the CentreDirect External Print Server. When the printer is connected to a
functioning network and receiving traffic, its link LED is green, and its amber traffic LED
is flashing rapidly.
3.
Print a “Configuration Page” and verify that the desired protocol is enabled, then follow
one of these options:
■
Proceed to Step 4 if you do not have a TCP/IP address configured for your printer.
■
Proceed to Step 5 if you do have a TCP/IP address configured for your printer.
4.
Do one of the following if you
do not
have a TCP/IP address configured for your system:
■
Contact your system administrator to ensure that configuration is made according to
your company guidelines.
■
Configure your PC with a unique address such as 192.1.1.1.
5.
If you have a TCP/IP address, then follow these steps to verify the IP address for your PC:
a.
Click
Start
, then click
Run
.
b.
Enter
winipcfg
in the
Open
field. (If the file is not found, TCP/IP may not be
installed.)
c.
Click
OK
.
d.
Select your network adapter from the list. The IP address is listed in the IP Address
field.
Note
For more information about installing and configuring TCP/IP in Windows
environments, go to your Microsoft Windows documentation.
6.
Proceed to “Quick CD-ROM Install Steps” or “Other Methods of Installation” for the
installation method desired.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Windows 98 and Windows Me Phaser® 8400 Color Printer 3-26 Quick CD-ROM Install Steps 1. Insert the Printer Installer and Utilities CD-ROM into the computer’s CD-ROM drive. If your PC is set to autorun, the installer launches automatically. If it does not launch, do the following: a. Click Start , th...
Windows 98 and Windows Me Phaser® 8400 Color Printer 3-27 Configuring a Port The Xerox TCP/IP Printer Port Wizard guides you step-by-step through the following procedures: ■ Choosing a name for the new port ■ Identifying a printer by its DNS Name or IP Address ■ (Alternatively) Identifying a printer...
Windows 98 and Windows Me Phaser® 8400 Color Printer 3-28 Changing a PhaserPort IP Address If the printer’s IP address is changed, you must change the IP address for the printer’s corresponding port: 1. Click Start , click Settings , then click Printers . 2. Right-click the printer to be changed to ...
