Xerox 75 - Manual
Xerox 75 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Print Features; Feature Description
- Page 3 – PostScript; Feature Implementation
- Page 7 – Euro Font
- Page 8 – Structure of a PostScript File that Includes Xerox Commands; Section 5 (Options coded with additional postscript commands)
- Page 9 – PostScript Feature Dependencies/Caveats
- Page 10 – PCL; PCL Print Features
- Page 13 – PCL Symbol Set
- Page 14 – Structure of a PCL File that Includes Xerox Commands; Section 2 (Options coded with additional PCL PJL commands); Section 6 (PCL code used to invoke PCL Language)
- Page 15 – PCL Feature Dependencies/Caveats; ESC
- Page 16 – Using WordPad to Create a PS/PCL Printing Feature File; Test
- Page 17 – PostScript Fonts
- Page 18 – PCL Fonts
- Page 20 – ASCII Conversion Table
- Page 21 – Additional Information
dc04cc0332
Page 1
Customer Support
PDL Reference Guide for the
WorkCentre Pro 65/75/90
Accessing Extended Features
Overview
This document contains information to help you access the extended features of a
WorkCentre Pro 65/75/90 in environments that do not have a custom driver. These include
the following environments:
•
Custom DOS packages
•
Other platforms (including mainframes and minis)
Some of the commands and syntax used in this document requires familiarity with either
PostScript (PS) or Printer Command Language (PCL). This document provides the Printer
Description Language (PDL) commands and syntax for each feature. The following items are
also included:
•
A table that describes features supported by the WorkCentre Pro 65/75/90.
•
A PostScript table that describes the PostScript features and syntax the WorkCentre Pro
65/75/90 supports.
•
A PCL table, that describes the PCL features and syntax the WorkCentre Pro 65/75/90
supports.
This document is not intended to be a complete PS or PCL reference manual; use it as a
guide for using the PS and PCL commands for the WorkCentre Pro 65/75/90.
Refer to these additional reference materials
PostScript Language Reference Manual
, 2
nd
Edition, ISBN 0-201-18127-4 and
PCL 5 Printer Language Technical Reference Manual
,
Hewlett-Packard Manual Part Number 5021-0377.
Using this Guide
1. Search the Feature Table to determine whether the feature you wish to use is
supported.
2. Verify that the feature is supported by the platform. For example, the WorkCentre
Pro 65/75/90 must have the Finisher option installed to use stapling commands.
3. Follow across the table to find the syntax listed for the PDL examples shown. Read the
Dependencies/Caveats section.
Extended Features:
•
Accounting
•
Proof Print
•
Staple
•
Collation
•
Duplex
•
Cover Options
•
Media Source,
Type, and Color
•
Media Size
•
Quantity
•
Delay Print
Xerox Multifunction Devices
Customer Tips
… for the user
dc04cc0332
June 9, 2004
This document applies
to these
Xerox
products:
WC Pro 32/40 Color
x WC Pro 65/75/90
WC Pro 35/45/55
WC
M35/M45/M55
DC
555/545/535
DC
490/480/470/460
DC
440/432/425/420
DC
332/340
DC
265/255/240
DC
220/230
DCCS
50
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
dc04cc0332 Customer Support Page 2 Print Features The WorkCentre Pro 65/75/90 supports PostScript level 2 and 3 commands or PCL5e and PCL6 escape sequences that enable the features listed in the following table. Feature Description Job Name Allows you to specify a job name. Job Owner Allows you to s...
dc04cc0332 Page 3 Customer Support Feature Description Interleave Media Color Allows you to select media color for the interleaves. Only use this feature in conjunction with ithe nterleave feature. Delay Print Allows you to specify a time, up to 72 hours from the current printer time, to print a job...
dc04cc0332 Page 7 Customer Support Feature Implementation Values Delay Print %%OID_ATT_JOB_PRINT_AFTER " yyyymmddhhmmss ” Allows you to specify the time a job prints. You can set this time up to 72 hours from the current printer time. Where yyyy is the year, mm is the month, dd is the date, hh i...
