Xantech HD44C - Manual
Xantech HD44C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – DETAIL OVERVIEW
- Page 4 – RS232 COMMAND STRUCTURE
- Page 6 – IMPORTANT NOTICE; CIRCUIT
- Page 8 – Installation Complete! No adjustments needed!
- Page 9 – The RC68+ should be set to Group Code “C0”.
- Page 10 – FIGURE 2
- Page 11 – FIGURE 3
- Page 12 – Several manufacturers of cable and satellite box may; Picture appears to be blooming:; A blooming picture is usually caused by a video signal that is too
- Page 13 – This page intentionally left blank
- Page 16 – Xantech Limited Warranty
08905071B
-
1
-
INSTALLATION INSTRUCTIONS
HD44CC5 HD44C
High Definition Video Matrix Switcher,
Coaxial and CAT5
High Definition Video Matrix Switcher,
Coaxial Only
DESCRIPTION
The HD44CC5 four-source, four-zone high-definition matrix switcher has component video and
S/PDIF digital audio inputs for each source. All four zone outputs have component video output and
S/PDIF audio output for economical local distribution up to 250’, as well as a RJ45 output for
transmission of the video and digital audio signal up to 1000’ to the HDRXSG01 receiver located in
the zone. Both coaxial component video output and CAT5 output are active simultaneously, making it
possible to distribute four sources to eight outputs at the same time.
The HD44C has the same great features as the HD44CC5 without the CAT5 output. The HD44C is
ideal for installations requiring local switching and distribution up to 250’.
The HD44CC5 and HD44C unit is expandable up to 16 zones.
SPECIFICATIONS
Size: 17” W x 7 3/8” D x 3 15/16” H
Weight: 9.25 lbs (4.2 kilos)
Controllable through IR and RS232 commands
Bandwidth
supports
resolutions
of 1080p, 1080i, 720p, 480p and 480i.
Optional Rack Mount kit available (RM2UKIT)
Power supply (120VAC, 0.25A, 50-60Hz)
Operates in temperatures up to 55 degrees Celsius.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
08905071B - 2 - DETAIL OVERVIEW [1] SOURCE LOOP-THROUGH CONNECTION The source inputs are buffered to provide an output at the same levels, assuming a 75-ohm termination is on the output. Use these connections for HD44 expansion systems. The buffers are an active circuit. The HD44 must be powered on ...
08905071B - 4 - RS232 COMMAND STRUCTURE Where: {CR # } – Carriage Return (0x0D) { z# } - Zone Number. Range is 1..4 (1..16 if expanded) { s# } - Source Input Number. Range is 1..4 { 0/1 } – Either 0 (zero) or 1 (one). 0 – Off, 1 – On. NAME COMMAND RETURN REMARKS !{ z# } PR 01+ To turn on Zone 2: !2P...
08905071B - 6 - [6] AC POWER INPUT Standard IEC 3-Conductor AC Line Cord Receptacle for plug-in of a 3-conducator power line cord. Be sure to note if the power receptacle is domestic (120VAC type) or international (240VAC type). [7] RS232 EXPANSION The HD44C and HD44CC5 can be expanded into a larger...
