Xantech RF2IR - Manual
Xantech RF2IR – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Specifications
- Page 3 – IR LED, RF LED: Flashes when emitting IR and RS232 commands; Quick Start Instructions
- Page 4 – Locating the RF2IR; The RF2IR should be placed on a flat, stable surface.; Care and Maintenance; Information
- Page 5 – Xantech Limited Warranty
-
1
-
RF2IR
RF Base Station
Quick Start
Installation Instructions
ATTENTION: Requires the XTR39 to operate.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
- 2 - Welcome! The RF2IR base station is the ultimate Xantech accessory to the Xantech XTR39 Color LCD remote. It’s a receiver that accepts the Radio Frequency output of the XTR39 remote and translates it into IR and RS232 command signals that can control virtually any home electronic device. The RF...
- 3 - RF2IR Diagram (Front) IR LED, RF LED: Flashes when emitting IR and RS232 commands Quick Start Instructions Step 1. Plug the (4) 283M emitters (included) into the port labeled IR output 1 thru 4 on the back of the RF2IR. Next, place the associated 283M emitter head directly over the IR eye on t...
- 4 - RF2IR Configuration (Channel Address) The Channel Address on the RF2IR cannot be programmed using Universal Dragon. Located on the bottom of the RF2IR device is a rotary switch. Turn this switch to select the desired Channel Address. The switch is labeled in HEX notation. “A” stands for Channe...
