Xantech RS41AV - Manual
Xantech RS41AV – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – FIig 2; Additional Source Switching for a TV Monitor; TV; MONITOR; Power; TYPICAL APPLICATIONS
- Page 3 – Remote Control Switchers; Expanding the Source Switching of an AV Receiver; AV; INSTALLATION
- Page 4 – RS41AV SPECIFICATIONS; The power supply for the RS41AV may be connected to the
1
Remote Control Switchers
GENERAL INFORMATION
• The RS41AV is a low noise, wide bandwidth, unity gain, infrared remote controlled switcher for line level
stereo audio and video baseband signals.
• It selects audio and video signals from any one of four sources and sends them to one output with no signal
loss.
• It allows additional source selections for the inputs of A/V receivers, VCR's, TV monitors, etc.
• A hand-held programmer, model RC68+ (available separately), is the source of the four IR input switching
commands for the RS41AV (see Fig.4). Normally the installer would "teach" these commands into a
Xantech Learning Remote, Key Pad or other learning device for eventual use by the customer.
• The space saving "flat pack" design allows great flexibility in mounting and positioning.
INSTALLATION INSTRUCTIONS
RS41AV
FOUR INPUT AUDIO/VIDEO REMOTE SWITCHER
IR
CONFIRM
V V
POWER 15VAC
VIDEO
AUDIO
LEFT
INPUT
OUTPUT
AUDIO
RIGHT
1
2
3
4
6
3
5
1
2
4
®
RS41AV
REMOTE SWITCHER
G IR IN
Fig. 1
RS41AV PANEL DESCRIPTIONS
1. INPUT jacks. Connect to the corresponding output jacks of the source components (satellite receiver,
VCR, camcorder, laser disc player, TV surveillance camera, CD player, AM/FM tuner, cassette tape
deck, etc.).
2. OUTPUT jacks. Connect to the corresponding input jacks of AV receivers, TV monitors, VCRs, etc.
3. POWER 15VAC V V terminals. Connect the leads of the 15V AC Power Supply (included) to these
terminals (lead polarity is not required).
4. G and IR IN terminals. Input terminals for the IR control signal. Connect a 2-conductor cable from
the emitter or signal output port of any Xantech Connecting Block, IR receiver, Key Pad, or Controller
here. The positive lead connects to "IR IN" and the negative to "G".
5. IR CONFIRM LED. Lights continuously when power is applied. Flashes when RC68+ (and RC68)
IR commands are received.
6. Mounting Holes.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 FIig 2 Additional Source Switching for a TV Monitor IR CONFIRM V V POWER 15VAC VIDEO AUDIO LEFT INPUT OUTPUT AUDIORIGHT 1 2 3 4 G IR IN ® RS41AV REMOTE SWITCHER V L R V L R V L R V L R TV MONITOR To 120 V AC (unswitched) RCA type patch cords 781RG Power Supply 291-00 IR Receiver 789-44 Connectin...
3 Remote Control Switchers Fig. 3 Expanding the Source Switching of an AV Receiver IR CONFIRM V V POWER 15VAC VIDEO AUDIO LEFT INPUT OUTPUT AUDIORIGHT 1 2 3 4 G IR IN ® RS41AV REMOTE SWITCHER V L R V L R V L R L R TV MONITOR RCA type patch cords 490-30 IR Receiver 789-44 Connecting Block VCR DVD P...
4 7-24-00 1 A B C ADJ-OFF 1 2 3 4 5 6 7 8 GLOBAL Z-ADJ TREBLE VOL MUTE ON OFF E-FLAT LAST MAX-V TRIM OFF C-BAL BASS INPUT A 8 0 4 8 1 0 9 0 0 1 0 0 C 0 5 0 D 0 4 1 4 0 A 0 3 0 B 0 2 1 2 0 E 0 7 0 F 0 6 1 6 0 8 8 1 8 9 8 0 9 0 8 A 8 3 8 B 8 2 9 2 8 E 8 7 8 F 8 6 9 6 8 C 8 5 8 D 8 4 9 E 1 8 9 C 9 A ...
