Xantech DPC100 - Manual

Xantech DPC100 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

The DPC100 is a Doorbell / Paging Controller that can be combined with a MRC88CTL to provide
whole-house paging and doorbell capability. Adding the Doorbell Communicator (DCSS or DCBB)
and Doorbell Communicator Hub (DCH4) with the MRC88CTL system creates a complete entry
control and paging solution. The DPC100 can also provide “Music on hold” for an existing phone line.

SPECIFICATIONS

Power: 120VAC/13.8VAC 1.25Amp, UL listed adaptor provided.

Dimensions: 133mm x 89mm x 44mm (5.25” x 3.5” x 1.75”)

Shipping Weight: 1.36 kg (3 lbs)

Environmental: 0C to 32C (32F to 90F) with 5% to 95% non-condensing humidity.

REN:

0.5A

Max Doorbell Switch Wire Run: 305m (1000 ft) max, 24 AWG

Max Load on Page Trigger Output: 1kOhm

Talk Battery: 36VDC

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - SWITCH; OFF

08905106B - 2 - 1. Power supply connection. Be sure to use the included power supply only. 2. Doorbell Switch Input (lighted or non-lighted). Provides door chime over speakers (not polarity sensitive). This input can also be connected to a DCH4 for a unique front / back door chimes. 3. C.O. / Phone ...

Page 3 - APPLICATION

Page 5 - Note: This input is not; ON; Note: The DCH4 must have the auxiliary contact mode; Quick Reference Guide

08905106B - 5 - I. Door Chime (Doorbell Switch Input) With DIP switch 2 in the OFF position (see DIP Switch Programming , page 2), the doorbell input terminals on the DPC100 can be connected to a normally open switch (lighted or non-lighted doorbell buttons, etc.). When the switch is activated, the ...