White Rodgers 1F95EZ-0671 - Manual
White Rodgers 1F95EZ-0671 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OFF; WIRING CONNECTIONS; Rear view of thermostat; Power Stealing Switch
- Page 3 – WIRING DIAGRAMS; Figure 3 –
- Page 4 – Programming and Configuration Items; THERMOSTAT QUICK REFERENCE; Home Screen Description; Figure 6 – Home Screen Display; Change
- Page 5 – INSTALLER/CONFIGURATION MENU; press and hold the Menu button for at least 5 seconds; table below. Press Menu to advance to the next menu item. Press
- Page 6 – MODE
- Page 7 – HEAT; CAUTION; AUX
- Page 8 – No Heat; Set System to; and raise the setpoint; COOL; and lower the setpoint below the; ON; for slow cycle in the; and; Be sure to review the installer configuration menu settings.; TROUBLESHOOTING
To prevent electrical shock and/or equipment damage,
disconnect electric power to system at main fuse or
circuit breaker box until installation is complete.
CAUTION
!
ATTENTION: MERCURY NOTICE
This product does not contain mercury. However, this
product may replace a product that contains mercury.
Mercury and products containing mercury must not be
discarded in household trash. Do not touch any spilled
mercury. Wearing non-absorbent gloves, clean up any
spilled mercury and place in a sealed container. For
proper disposal of a product containing mercury or a
sealed container of spilled mercury, place it in a suitable
shipping container. Refer to
www.white-rodgers.com
for
location to send product containing mercury.
Index
Page
Installation
2
Wiring Connections
2
Wiring Diagrams
3
Thermostat Quick Reference
4
Installer Configuration Menu
5
Operating Your Thermostat
7
Troubleshooting
8
Model
Programming Choices
1F95EZ-0671
Non-Programmable
7 Day
Blue Easy Reader Thermostat
www.white-rodgers.com
www.emersonclimate.com
PART NO. 37-6986B
Replaces 37-6986A
1023
Single Stage, Multi-Stage, Heat Pump
Installation Instructions for Model:
APPLICATIONS
THERMOSTAT APPLICATION GUIDE
1F95EZ-0671 Thermostat
SPECIFICATIONS
Save these instructions for future use!
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
CAREFULLY BEFORE INSTALLING OR OPERATING THIS
CONTROL COULD CAUSE PERSONAL INJURY AND/OR
PROPERTY DAMAGE.
Electrical Rating:
Battery Power . . . . . . . . . . . . . . . . . . . . . . . . . . mV to 30 VAC, NEC Class II, 50/60 Hz or DC
Input-Hardwire . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 30 VAC
Terminal Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A per terminal, 2.5A maximum all terminals combined
Setpoint Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 to 99°F (7 to 32°C)
Rated Differentials: Fast
Med.
Slow
Heat (Single Stage/Multi Stage) . . . . . . . . . . . . 0.4 °F
0.6 °F
1.7 °F
Cool (Single Stage/Multi Stage) . . . . . . . . . . . . 0.9 °F
1.2 °F
1.7 °F
Heat Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.9 °F
1.2 °F
1.7 °F
Aux. Heat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6 °F
–
1.7 °F
Operating Ambient . . . . . . . . . . . . . . . . . . . . . . . . . . 32°F to +105°F (0 to +41°C)
Operating Humidity . . . . . . . . . . . . . . . . . . . . . . . . . 90% non-condensing max.
Shipping Temperature Range . . . . . . . . . . . . . . . . . -40 to +150°F (-40 to +65°C)
Dimensions Thermostat . . . . . . . . . . . . . . . . . . . . . . 4-3/16"H x 6-1/2"W x 1-5/8"D
Thermostat
Configuration Options
Thermostat
Applications
Maximum
Stages
Heat/Cool
Single Stage 1
No Heat Pump (SS1)
Gas, Oil, Electric, Heat Only,
Cool Only or Heat/Cool
Systems, 2 or 3 wire Hydronic
Zone (Hot Water or Steam)
Systems, 24 Volt or Millivolt
1/1
Multi Stage 2
No Heat Pump (MS2)
2/2
Heat Pump 1
Single Stage Compressor
Heat Pump (HP1)
Single Stage Compressor
Heat Pump Systems - up to 2
Stages Aux./Emergency Heat
3/1
Heat Pump 2
Two Stage or Two
Compressor Heat Pump
(HP2)
Two Stage or Two Compressor
Heat Pump systems - up to 2
Stages Aux./Emergency Heat
4/2
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Remove Old Thermostat Before removing wires from old thermostat, mark wires for terminal identification so the proper connections will be made to the new thermostat. Installing New Thermostat 1. Pull the thermostat body off the thermostat base. Forcing or prying on the thermostat will cause damage...
3 WIRING DIAGRAMS Figure 2 – Single Stage, SS1, or Multi-Stage, MS2, System (No Heat Pump) with Single Transformer (Gas, Oil or Electric) Single Stage 1 (SS1) Multi- Stage 2 (MS2) O Energized Constantly in Cool Mode B Energized Constantly in Heat, Off, Emergency Mode No Output Cool Mode 2nd Stage Co...
4 Programming and Configuration Items 1 “Heat" “A/C” “Off” identifies button. When filled indi - cates system mode selected. 2 " " indicates thermostat configured for Heat Pump. "Aux" indicates Auxiliary (Emergency) stage is selected. 3 "Adv Day" identifies button when in...
