White Rodgers 1F95-1277 - Manual
White Rodgers 1F95-1277 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Battery Location
- Page 3 – THERMOSTAT QUICK REFERENCE; Home Screen Description
- Page 4 – INSTALLER/CONFIGURATION MENU
- Page 7 – OPERATING YOUR THERMOSTAT; Choose the Fan Setting (Auto or On or Prog); PROGRAMMING; Set Current Time and Day
- Page 8 – Automatic Schedule
- Page 9 – Energy Saving Factory Pre-Program; Planning Your Program – Important
- Page 10 – Wired Remote Temperature Sensing
- Page 11 – TROUBLESHOOTING; Reset Operation; Symptom
Installation
2
Wiring Connections
2
Thermostat Quick Reference
3
Installer Configuration Menu
4
Operating Your Thermostat
7
Programming
7
Troubleshooting
11
www.white-rodgers.com
90 Series Blue Universal Thermostat with
90 Series Blue Universal Thermostat with
90 Series Blue Universal Thermostat with
90 Series Blue Universal Thermostat with
90 Series Blue Universal Thermostat with
Automatic Heat/Cool Changeover Option
Automatic Heat/Cool Changeover Option
Automatic Heat/Cool Changeover Option
Automatic Heat/Cool Changeover Option
Automatic Heat/Cool Changeover Option
PART NO. 37-6753A
0626
Single Stage, Multi-Stage, Heat Pump
Installation and Operating Instructions for Model:
APPLICATIONS
Description
Heat Pump (No Aux. or Emergency Heat)
Yes
Heat Pump (with Aux. or Emergency Heat)
Yes
Systems with up to 3 Stages Heat, 2 Stages Cool
Yes
Heat Only Systems
Yes
Millivolt Heat Only Systems – Floor or Wall Furnaces
Yes
Cool Only Systems
Yes
Gas or Oil Heat
Yes
Electric Furnace
Yes
Hydronic (Hot Water) Zone Heat – 2 Wires
Yes
Hydronic (Hot Water) Zone Heat – 3 Wires
Yes
Wired Remote Temperature Sensor (Indoor/Outdoor)
Yes
Dual Fuel Feature (Heat Pump Mode)
Yes
THERMOSTAT APPLICATION GUIDE
1F95-1277 Touchscreen Thermostat
SPECIFICATIONS
Electrical Rating:
Batter y Power . . . . . . . . . . . . . . . . . . . . . . . . .
mV to 30 VAC, NEC Class II, 50/60 Hz or DC
Input-Hardwire . . . . . . . . . . . . . . . . . . . . . . . .
20 to 30 VAC
Terminal Load . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.5A per terminal, 2.5A maximum all terminals combined
Setpoint Range . . . . . . . . . . . . . . . . . . . . . . . . . . .
45 to 99°F (7 to 32°C)
Differential (Single Stage) . . . . . . . . . . . . . . . . . . .
Heat 0.6°F; Cool 1.2°F
Differential (Multi-Stage) . . . . . . . . . . . . . . . . . . . .
Heat 0.6°F; Cool 1.2°F
Differential (Heat Pump) . . . . . . . . . . . . . . . . . . . .
Heat 1.2°F; Cool 1.5°F
Operating Ambient . . . . . . . . . . . . . . . . . . . . . . . . .
32°F to +105°F (0 to +41°C)
Operating Humidity . . . . . . . . . . . . . . . . . . . . . . . .
90% non-condensing max.
Shipping Temperature Range . . . . . . . . . . . . . . . .
-4 to +150°F (-20 to +65°C)
Dimensions Thermostat . . . . . . . . . . . . . . . . . . . . .
4.6"H x 5.9"W x 1.2"D
To prevent electrical shock and/or equipment dam-
age, disconnect electric power to system at main fuse
or circuit breaker box until installation is complete.
CAUTION
!
ATTENTION: MERCURY NOTICE
This product does not contain mercur y. However, this
product may replace a product that contains mercur y.
Mercury and products containing mercur y must not be
discarded in household trash. Do not touch any spilled
mercury. Wearing non-absorbent gloves, clean up any
spilled mercury and place in a sealed container. For proper
disposal of a product containing mercury or a sealed
container of spilled mercur y, place it in a suitable shipping
container and send it to:
White-Rodgers
2895 Harrison Street
Batesville, AR 72501
Index
Page
Model
Programming Choices
1F95-1277
Non-Programmable 5/1/1 Day
7 Day
Save these instructions for future use!
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
CAREFULLY BEFORE INSTALLING OR OPERATING THIS
CONTROL COULD CAUSE PERSONAL INJURY AND/OR
PROPERTY DAMAGE.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 2 "AA" Batteries WIRING CONNECTIONS Refer to equipment manufacturers' instructions for specificsystem wiring information. After wiring, see CONFIGURA-TION section for proper thermostat configuration. For wiring diagrams, see 37-6808A.Wiring diagrams shown are for typical systems and descri...
3 Time of Day Day of Week RoomTemperature SystemSwitch FanSwitch Indicates whenthermostat is callingfor Heat or Cool Battery Level IndicatorIndicating the current power levelof the 2 “AA” batteries. Full power remaining. Half power remaining. Change The batteries should be replaced at this time. Men...
4 CONFIGURATION MENU Non- Displayed Press or Program- Program- Press (Factory to select from mable mable Button Default) listed options Comments 1 1 MS 2 HP 1, HP 2, SS 1 Selects Multi-Stage (MS 2, No Heat Pump), Heat Pump 1 (HP 1, 1 compressor), Heat Pump 2 (HP 2, 2 compressor or 2 speed compressor...
