White Rodgers 1F95-0680 - Manual
White Rodgers 1F95-0680 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WIRING CONNECTIONS; Power Stealing Switch; Rear view of thermostat
- Page 3 – WIRING DIAGRAMS; Figure 1 – Heat Pump Systems; Heat Pump Connections; with Two Transformers
- Page 4 – Programming and Confi guration Items; indicates when heating or cooling stage; THERMOSTAT QUICK REFERENCE; Home Screen Description; Figure 5 – Home Screen Display; in Menu mode when selecting key-; Change
- Page 5 – INSTALLER/CONFIGURATION MENU; to change a menu item options.
- Page 8 – Fan Operation; NOTE; Check Thermostat Operation; CAUTION; Heating System
- Page 9 – Cooling System; OPERATING YOUR THERMOSTAT; Set Current Time and Day
- Page 10 – PROGRAMMING; Energy Saving Factory Pre-Program
- Page 12 – Dual Fuel Temperature Setpoint
- Page 13 – Reset Operation; and; TROUBLESHOOTING
- Page 14 – NOTES
Blue Commercial Ther mostat with
Automatic Heat/Cool Changeover
Option and Damper Control
Model
Programming Choices
1F95-0680
7 Day
5/1/1 Day
Non-Programmable
www.white-rodgers.com
PART NO. 37-6819A
0811
Single Stage, Multi-Stage, Heat Pump
Installation and Operating Instructions for Model:
APPLICATIONS
THERMOSTAT APPLICATION GUIDE
1F95-0680 Commercial Thermostat
SPECIFICATIONS
To prevent electrical shock and/or equipment damage,
disconnect electric power to system at main fuse or
circuit breaker box until installation is complete.
CAUTION
!
Save these instructions for future use!
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
CAREFULLY BEFORE INSTALLING OR OPERATING THIS
CONTROL COULD CAUSE PERSONAL INJURY AND/OR
PROPERTY DAMAGE.
Description
Heat Pump (No Aux. or Emergency Heat)
Yes
Heat Pump (with Aux. or Emergency Heat)
Yes
Systems with up to 4 Stages Heat, 2 Stages Cool
Yes
Heat Only Systems
Yes
Millivolt Heat Only Systems – Floor or Wall Furnaces
Yes
Cool Only Systems
Yes
Gas or Oil Heat
Yes
Electric Furnace
Yes
Hydronic (Hot Water) Zone Heat – 2 Wires
Yes
Hydronic (Hot Water) Zone Heat – 3 Wires
Yes
Wired Remote Temperature Sensor (Indoor or Outdoor)
Yes
Dual Fuel Damper Control Feature (Heat Pump Mode
Outdoor Remote Required)
Yes
ATTENTION: MERCURY NOTICE
This product does not contain mercury. However, this prod-
uct may replace a product that contains mercury.
Mercury and products containing mercury must not be
discarded in household trash. Do not touch any spilled
mercury. Wearing non-absorbent gloves, clean up any
spilled mercury and place in a sealed container. For proper
disposal of a product containing mercury or a sealed
container of spilled mercury, place it in a suitable shipping
container. Refer to
www.white-rodgers.com
for location to
send product containing mercury.
Index
Page
Installation
2
Wiring Connections
2
Wiring Diagrams
3
Thermostat Quick Reference
4
Installer Confi guration Menu
5
Operating Your Thermostat
8
Programming
9
Troubleshooting
13
Electrical Rating:
Battery Power . . . . . . . . . . . . . . . . . . . . . . . . . . mV to 30 VAC, NEC Class II, 50/60 Hz or DC
Input-Hardwire . . . . . . . . . . . . . . . . . . . . . . . . . 20 to 30 VAC
Terminal Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A per terminal, 2.5A maximum all terminals combined
Setpoint Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 to 99°F (7 to 32°C)
Differential (Single Stage) . . . . . . . . . . . . . . . . . . . . Heat 0.6°F; Cool 1.2°F
Differential (Multi-Stage) . . . . . . . . . . . . . . . . . . . . . Heat 0.6°F; Cool 1.2°F
Differential (Heat Pump) . . . . . . . . . . . . . . . . . . . . . Heat 1.2°F; Cool 1.5°F
Operating Ambient . . . . . . . . . . . . . . . . . . . . . . . . . . 32°F to +105°F (0 to +41°C)
Operating Humidity . . . . . . . . . . . . . . . . . . . . . . . . . 90% non-condensing max.
Shipping Temperature Range . . . . . . . . . . . . . . . . . -40 to +150°F (-40 to +65°C)
Dimensions Thermostat . . . . . . . . . . . . . . . . . . . . . . 4.2"H x 6.4"W x 1.7"D
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Remove Old Thermostat Before removing wires from old thermostat, mark wires for terminal identifi cation so the proper connections will be made to the new thermostat. Installing New Thermostat 1. Pull the thermostat body off the thermostat base. Forcing or prying on the thermostat will cause damag...
3 WIRING DIAGRAMS Figure 1 – Heat Pump Systems Figure 2 – Single Stage or Multi-Stage System (No Heat Pump) with Single Transformer Heat Pump Connections If you do not have a heat pump system, refer to fi gures 2 & 3. Refer to equipment manufacturers' instructions for specifi c system wiring inf...
4 Programming and Confi guration Items 1 "System On" indicates when heating or cooling stage is energized. "System On +2" indicates when a second stage is energized. 2 The word HOLD is displayed when the thermostat is in the HOLD mode. Temp is displayed when the thermostat is in a Te...
