White Rodgers 1F85-0477 - Manual
White Rodgers 1F85-0477 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Remove Old Thermostat; is displayed, the batteries should be replaced before; WIRING CONNECTIONS; Terminal; Relay
- Page 3 – Heat Pump Connections; RC; RH; Single Stage and Multi-Stage Connections
- Page 5 – P Date; SYSTEM; Set; Change; The batteries; THERMOSTAT QUICK REFERENCE; Home Screen Description
- Page 6 – INSTALLER/CONFIGURATION MENU; MENU
- Page 8 – Set Current Time and Date; button to change the display to the correct set-; PROGRAMMING
- Page 9 – Enter the Heating Program
- Page 11 – panel loose or not properly installed.; No Heat; Set SYSTEM Switch to; HEAT; and raise the; No Cool; for slow cycle in the Confi guration menu,; TROUBLESHOOTING; When thermostat is reset, installer confi guration menu
1
Blue 4” Universal Ther mostat with
Automatic Heat/Cool Changeover Option
Single Stage, Multi-Stage or Heat Pump
Installation and Operating Instructions for Model:
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
CAREFULLY BEFORE INSTALLING OR OPERATING
THIS CONTROL COULD CAUSE PERSONAL INJURY
AND/OR PROPERTY DAMAGE.
Save these instructions for future use!
APPLICATIONS
SPECIFICATIONS
Electrical Rating:
Battery Power .................................................... mV to 30 VAC, NEC Class II, 50/60 Hz or DC
Input-Hardwire ................................................... 20 to 30 VAC
Terminal Load ........................................................... 1.5 A per terminal, 2.5A maximum all terminals combined
Setpoint Range ......................................................... 45° to 90°F (7° to 32°C)
Differential (Single Stage) ......................................... Heat 0.6°F; Cool 1.2°F (adjustable)
Differential (Heat Pump) ........................................... Heat 1.2°F; Cool 1.2°F (adjustable)
Operating Ambient .................................................... 32° to +105°F (0° to +41°C)
Operating Humidity ................................................... 90% non-condensing max.
Shipping Temperature Range ................................... -40° to +150°F (-20° to +65°C)
Dimensions Thermostat ............................................ 3-7/8”H x 5-1/8”W x 1-1/4”D
www.white-rodgers.com
1F85-0477 Thermostat
Model
Programming Choices
1F85-0477
7 Day
5/1/1 Day
ATTENTION: MERCURY NOTICE
This product does not contain mercury. However, this product
may replace a product that contains mercury.
Mercury and products containing mercury must not be
discarded in household trash. Do not touch any spilled
mercury. Wearing non-absorbent gloves, clean up any spilled
mercury and place in a sealed container. For proper disposal
of a product containing mercury or a sealed container. Refer
to
www.white-rodgers.com
for location to send product
containing mercury.
To prevent electrical shock and/or equipment damage,
disconnect electric power to system at main fuse or
circuit breaker box until installation is complete.
CAUTION
!
THERMOSTAT APPLICATION GUIDE
Description
Heat Pump (No Aux. or Emergency Heat)
Yes
Heat Pump (with Aux. or Emergency Heat)
Yes
Systems with up to 2 Stages Heat, 2 Stages Cool
Yes
Heat Only Systems (with optional fan switch)
Yes
Millivolt Heat Only Systems – Floor or Wall Furnaces
Yes
Cool Only Systems
Yes
Gas or Oil Heat
Yes
Electric Furnace
Yes
Hydronic (Hot Water) Zone Heat – 2 Wires
Yes
Hydronic (Hot Water) Zone Heat – 3 Wires
Yes
Index
Page
Installation
2
Wiring Connections
2
Wiring Diagrams
3
Thermostat Quick Reference
5
Installer Confi guration Menu
6
Operating Your Thermostat
8
Programming
8
Troubleshooting
11
PART NO. 37-7050A
0933
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 INSTALLATION Thermostat installation and all components of the control system shall conform to Class II circuits per the NEC code. WARNING ! Remove Old Thermostat A standard heat/cool thermostat consists of three basic parts:1. The cover, which may be either a snap-on or hinge type. 2. The base, w...
3 Single Stage 1 (SS1) Multi- Stage 2 (MS2) O Energized Constantly in Cool Mode B Energized Constantly in Heat, Off, Emergency Mode No Output Cool Mode 2nd Stage Cool Mode 1st Stage Blower/ Circulator Fan Energized on Call for Cool (and Heat if configuredfor Electric Heat) No Output Heat Mode 2nd St...
5 11 10 9 1 8 7 6 5 4 3 2 12 Month Change Filter Call For Service Save Temp Hold P Date Set Set Schedule SYSTEM FAN Year Run Hold Heat Mo Tu We Th Fr Sa Su System On + 2 Heat Pump Auto Sched Cool Savings Em Auto Auto Cool Off Time On Menu Set Mo P SYSTEM Heat FAN Auto Menu RoomTemperature SettingTem...
