Page 2 - CONTENTS
2 CONTENTS Important safety instructions .............................................................. 3Description of your appliance ............................................................. 5 POR663 ....................................................................................... 5 PORS...
Page 3 - This symbol indicates never to do this; ENVIRONMENTAL TIPS; INFORMATION ON DISPOSAL FOR USERS; WARNING; IMPORTANT SAFETY INSTRUCTIONS
3 SAFETY Please read the user manual carefully and store in a handy place for later reference. The symbols you will see in this booklet have these meanings: WARNING This symbol indicates information concerning your personal safety CAUTION This symbol indicates information on how to avoid damaging th...
Page 4 - COOKTOPS; INSTALLATION, CLEANING AND SERvICING; This appliance must be earthed.; GRILL
4 SAFETY WARNING COOKTOPS Do not allow pots to boil dry, as damage to both pan and cooktop may result.Do not operate the cooktop for an extended period of time without a utensil on the hot plate.Do not allow large cookware to overhang the cooktop onto the adjacent benchtop. This will cause scorching...
Page 7 - If your appliance is fitted with a mechanical “Auto
7 OPERATION BEFORE OPERATING YOUR APPLIANCE FOR THE FIRST TIME TIPS & INFORMATION SETTING THE TIME If you have purchased a model fitted with an electronic or programmable timer, you mUST set the time of day before you can operate your appliance. ELECTRONIC CLOCK • After the appliance has been el...
Page 8 - INSTALLING YOUR OvEN ACCESSORIES
8 INSTALLATION INSTALLING YOUR OvEN ACCESSORIES 1. Catalytic liners (on selected models) Catalytic liners are coated with a specially formulated enamel coating. This porous coating enables the “self cleaning” process – see page 27 for more details. Catalytic liners must be installed first but you ca...
Page 9 - Note: The Top ‘Ledge’ is not a shelf position
9 INSTALLATION INSTALLING YOUR OvEN ACCESSORIES • When locating the side racks into the small oven or grill ensure the left pegs go into the lower two access holes. 3. Shelves and trays (excluding POR881) (Refer Fig. 2) The shelves are designed so that they have maximum travel but cannot be accident...
Page 10 - USING YOUR OvEN
10 USAGE USING YOUR OvEN Understanding your oven functions Your oven will have a selection of the following functions; description and touch control symbol illustrated below. Refer to “Description of your appliance” (page 5) to confirm what functions are available to you. LARGE OvEN Function 1 Rapid...
Page 12 - Small Oven Grill
12 USAGE Small Oven Grill The “grill” directs radiant heat from the powerful upper element onto the food. You can use the “grill” function for tender cuts of meat, steak, chops, sausages, fish, cheese toasties and other quick cooking foods. Grill with the grill door open for PXR688 and PXR698. Prehe...
Page 13 - OvEN; DO NOT use the base of the oven for cooking – it will
13 USAGE Pre-heating your appliance For best results when baking it is recommended that you preheat your oven for 30 minutes. Preheat the grill for 3 minutes to obtain best results. Pre-heating your appliance allows it to reach the required temperature quickly and efficiently. With “rapid heat” For ...
Page 14 - CAUTION; Utensils; USING YOUR COOKTOP
14 USAGE CAUTION The ceramic cooktop is made from ceramic glass, a tough durable material that withstands heating and cooling without breaking. However, it must be remembered that as it is GLASS, it may break. Treat it accordingly! Should you have any questions about the glass in your new appliance,...
Page 15 - Dealing with cooktop problems; PROBLEM
15 USAGE Dealing with cooktop problems PROBLEM POSSIBLE CAUSE WHAT TO DO Heating elements not working 1 Power not switched on 2 Controls incorrectly set 3 Household fuse blown If the fuse continues to blow, contact the Service Centre • Check cooktop is plugged in and power is on • Check correct knob...
Page 16 - Once automatic baking is complete, return to manual; OPERATING THE ELECTRONIC CLOCK
16 OPERATION 90 minute “Auto Off” timer The 90 minute timer features an automatic oven “cut off”. A cooking period of up to 90 minutes can be used. When the timer has counted back to “Auto off” a ding will sound and the oven will automatically switch off. Once automatic baking is complete, return to...
Page 19 - MODEL POR881 ELECTRONIC CLOCK
19 OPERATION General features Your 5 button touch control clock has the following features: • TIMER – allows you to set a countdown time that will beep when the set time has elapsed. • The TEMP. button allows the current temperature of the oven to be displayed. • Elapsed time display Setting the tim...
Page 20 - Note: The clock display cannot be selected when the timer
20 OPERATION MODEL POR881 ELECTRONIC CLOCK Setting the timer 1. Press TImeR button until the display begins to flash. 2. Set the countdown time you want by using – and +. Commence with setting the number of seconds first. The minutes and hours can then be set by subsequently pressing the TIMER again...
Page 21 - OvEN SHELF LOCATION
21 OPERATION • Select the correct shelf location for food being cooked. • Make sure dishes will fit into the oven before you switch it on. • Keep edges of baking dishes at least 40mm from the side of the oven. This allows free circulation of heat and ensures even cooking. • Do not open the oven door...
Page 22 - Modes without Oven Fan; COOKING GUIDE
22 COOKING Modes without Oven Fan FOOD TEMPERATURE C OvEN SHELF POSITION* TIME IN MINUTES Scones Plain or fruit 220 2 10 – 15 Biscuits RolledSpoonedShortbread biscuits 170190160 222 10 – 1512 – 1530 – 35 meringues Hard – individualSoft – individualPavlova – 6 egg 110180110 221 9015 – 2075 Cakes Patt...
Page 23 - Roasting Meat; MEAT; Roasting poultry and fish; RECOMMENDED TEMPERATURE
23 COOKING Roasting Meat 1. Place the meat in the oven and set the temperature between 180°C and 200°C. (It is recommended to wrap your meats in an oven roasting bag or foil to prevent fats and oils from splattering, making it easier to clean your oven.) 2. Use the grill/oven dish and smokeless gril...
Page 24 - Grilling hints; GRILLING GUIDE
24 GRILLING Grilling hints TIPS & INFORMATION NOTE: Always clean the grill/oven dish after every use. Excessive fat build up may cause a fire. Depending on your model of appliance you will grill: • With the door open, if you are grilling in the separate grill wall-oven compartment. • With the dr...
Page 25 - • Incorrect tin size.; DEALING WITH COOKING PROBLEMS
25 COOKING PROBLEMS PROBLEM CAUSES REMEDIES Uneven cooking: • Incorrect shelf position.• Oven tray too large.• Trays not centralised.• Air flow in oven uneven.• Grill dish affecting thermostat. – Select shelf that puts food in the centre of the oven.– Experiment with other trays or dishes.– Centre t...
Page 26 - Enamel; Oven; CLEANING YOUR APPLIANCE
26 CLEANING TIPS & INFORMATION • Always make sure that the oven is electrically isolated before cleaning. This can be done via the functional switch located nearby. Do not use steam cleaners. • Do not line the bottom of the oven or grill with foil or cookware. Enamel • Rub persistent stains vigo...
Page 27 - Cleaning your oven accessories
27 CLEANING CLEANING YOUR APPLIANCE CATALYTIC LINERS (WHERE FITTED) Cleaning your oven accessories Removing the trays and shelves from your appliance • Slide the dish and grill tray towards you until they reach the front stop. • Tilt them up at the front to clear the side supports, taking care not t...
Page 28 - Removing the catalytic liners; NOTE: It is critical that the fan baffle is replaced after; CATALYTIC LINERS; Removing and replacing the oven light and side light (where fitted)
28 CLEANING Removing the catalytic liners • Remove Side Racks. • Lift the liner up to disengage the hooks. • The liners should now be free to be pulled in towards the centre of the oven. • Refer to page 8 for re-installing your side liners. Removing and replacing the catalytic fan baffle (where fitt...
Page 29 - Releasing the grill element
29 CLEANING WARNING make sure the appliance is turned off before you remove or replace parts, to avoid the possibility of electric shock. Releasing the grill element We have designed the upper element with a hanger clip to help you reach your oven roof for cleaning. Retaining wire models • Lift elem...
Page 30 - Removing the oven door
30 CLEANING Cleaning oven door (except models POR883 & POR881) WARNING Do not lift the door by the handle. Rough handling will cause glass to break. Removing the oven door Your oven is equipped with a door that can be disassembled in order to clean all the panes of glass. Remove the door before ...
Page 31 - Cleaning door glass panels; Re-assembling bottom trim
31 CLEANING Cleaning door glass panels WARNING Do not to use harsh abrasives on the glass panes as the reflective surface plays a role in the function of the oven. Do not place glass in dishwasher. Hand wash only with a soft cloth and warm soapy water. When dry polish with a soft cloth and ensure th...
Page 32 - Re-assembling top door trim
32 CLEANING Re-assembling top door trim • Take hold of the top door trim at each side and position it to the inside edge of the glass. • Push the trim down with its top edge over glass panel until the clip snaps in on each side of the trim. • Push the middle of the trim down to ensure it is straight...
Page 33 - Removing side open door glass panel; Cleaning side open door glass panels; Re-assembling door glass panels
33 CLEANING Removing side open door glass panel WARNING Rough handling, especially around the edges can cause the glass to break. • Take hold of the black bordered glass panel with a hand on its upper and lower edge. Lift and rotate the glass around the retainer to remove it from the guide. • Take h...
Page 34 - Positioning the door for dismantling; Replacing top door trim
34 CLEANING Your pyrolytic oven is equipped with an oven door that can be disassembled in order to clean all the panes of glass. Positioning the door for dismantling The door needs to be positioned at an angle to aid in the disassembly of the panes. • Open the oven door fully and flip out the locati...
Page 35 - Removing the glass panes; Replacing the top door trim
35 CLEANING Removing the glass panes • Remove the 3 panes of glass starting with pane 1. • When removing pane 3 ensure that the 2 rubber supports are removed before cleaning. Do not misplace them! Cleaning the glass panes Clean with a damp cloth. Do not use scouring agents or abrasive sponges as the...
Page 36 - PYROLYTIC CLEANING OF THE OvEN CAvITY; SOILING; Note: The cooling fan will operate at an increased speed
36 CLEANING PYROLYTIC CLEANING OF THE OvEN CAvITY (POR883 & POR881 MODELS ONLY) Operation If your oven has the Pyrolytic self-cleaning function, it cleans by burning off the spatters and accumulated dirt and grease from the oven cavity, at high temperature. This process produces ash which can th...
Page 37 - SOLvING PROBLEMS; Faults; NOTE: Only authorised personnel should carry out servicing.
37 SOLVING PROBLEMS SOLvING PROBLEMS Faults If there is a problem with the oven and/or grill, please: • Check the points listed below before calling for service. It may be possible to avoid a call by fixing the problem yourself – and so continue cooking. • For cooking problems refer to page 25. NOTE...
Page 38 - USE AN AUTHORISED PERSON; Cabinet Construction for your appliance; Flush Fit; INSTALLING YOUR APPLIANCE
38 INSTALLATION WARNING USE AN AUTHORISED PERSON As stated in the local municipal building codes and other relevant statutory regulations. • Wiring connections must be in accordance with AS/NZS 3000 Wiring Rules and any particular conditions of the local authority. • Refer to data plate for rating i...
Page 39 - Hard Wiring Detail; Underbench oven
39 INSTALLATION Hard Wiring Detail 1. Remove terminal cover plate from rear panel of appliance. 2. Fit wires through hole in cover plate and make connections to terminals. 3. engage wires into plastic clip. Secure plastic clip with two long silver screws (supplied in separate bag). 4. Replace cover ...
Page 40 - Underbench Ovens and Side Opening Door Ovens; GAS TYPE
40 INSTALLATION 561 596mm mounting holes 582mm use 25mm black installation screws (as supplied) use 25mm black installation screws (as supplied) use 15mm black installation screws (as supplied) A B C mounting holes mounting holes 596mm 561mm A B C 650mm min Underbench Ovens and Side Opening Door Ove...
Page 41 - Separate Grill Underbench Ovens
41 INSTALLATION Separate Grill Underbench Ovens Recommended Cabinet Design NOTE TO INSTALLER: For Separate Grill Underbench Installations where a Cooktop is installed directly above the appliance, a minimum clearance distance of 10mm must be allowed for between the bottom of the cooktop & the to...
Page 42 - Double Ovens; COOKTOP DIMENSIONS; A minimum gap of 40mm must be maintained between; THE COOKTOP MUST BE INSTALLED ABOvE THE UNDERBENCH OvEN.
42 INSTALLATION Double Ovens mounting holes use 25mm black installation screws (as supplied) use 15mm black installation screws (as supplied) mounting holes 596mm A 561mm B C 650mm min INSTALLATION COOKTOP DIMENSIONS Overall Cooktop Dimensions Width 610mm Depth 515mm Depth of base 45mm COOKTOP CUT-O...
Page 43 - Warranty; Important Notice
43 WARRANTY This document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance. 1. In this warranty (...
