Page 2 - User Manual; Important information that may impact; WARNING; any prior notice; VINTEC
V40SG2EBK V40SG2ES3 2 User Manual Important information that may impact your Manufacturer’s Warranty Adherence to the directions for use in this manual is extremely important for health and safety. Failure to strictly adhere to the requirements in this manual may result in personal injury, property ...
Page 5 - IMPORTANT - THIS SPACER MUST BE ATTACHED TO THE UNIT BEFORE
V40SG2EBK V40SG2ES3 5 User Manual The wine cellar should be placed where the ambient temperature is between 5ºC to 35ºC. If the ambient temperature is above or below this range, the performance of the unit may be affected. Placing your unit in extreme cold or hot conditions may cause interior temper...
Page 7 - INSTALLATION DRAWINGS FOR BUILT IN WINE CELLARS:
V40SG2EBK V40SG2ES3 7 User Manual INSTALLATION DRAWINGS FOR BUILT IN WINE CELLARS:
Page 8 - Dimension and Installation Guide; 0 Bottle Wine Cabinet; Dimensional drawings:
V40SG2EBK V40SG2ES3 8 User Manual 615 * 595 593 30 850 820 563 10 * 10 * 10 * 10 * 30 30 Spacer Spacer Dimension and Installation Guide vintec.com.au 1800 771 776 © 2018 Electrolux Home Products Pty Ltd ABN 51 004 762 341 VDIM_V40SG2EBK_DimSheet 50 Bottle Wine Cabinet V40SG2EBK FRONT VIEW SIDE VIEW ...
Page 9 - TURNING ON YOUR WINE CELLAR
V40SG2EBK V40SG2ES3 9 User Manual TURNING ON YOUR WINE CELLAR Plug in and switch on the cellar by pressing on the power button for a few seconds. When you use the wine cellar for the first time (or restart the wine cellar after having it shut off for a long time), there will be a few degrees varianc...
Page 10 - LOADING YOUR WINE CELLAR; homogeneous temperature within the cellar.
V40SG2EBK V40SG2ES3 10 User Manual LOADING YOUR WINE CELLAR You may load your wine bottles in single or double rows while taking note of the following: if you do not have enough bottles to fill your wine cellar, it is better to distribute the load throughout the wine cellar so as to avoid “all on to...
Page 11 - TYPES OF REGULATION; V40SG2e: electronic regulation digital display; red wines; for a longer time of storage.
V40SG2EBK V40SG2ES3 11 User Manual TYPES OF REGULATION Please note that depending on the loading and settings chosen it takes about 24 hours for the wine cellar to see the temperature stabilising. During this time LED seems to move erratically. It is normal and this process occurs whenever the setti...
Page 12 - TEMPERATURE SETTINGS; the preset temperature settings.; Factory preset chart; Lower compartment: 12
V40SG2EBK V40SG2ES3 12 User Manual TEMPERATURE SETTINGS Important: The LCD displays by default the actual internal air temperature. The temperature settings are pre-set at the factory as follows. In the event of a power interruption, all previous temperature settings are automatically erased and it ...
Page 13 - To modify the pre-set temperature
V40SG2EBK V40SG2ES3 13 User Manual To modify the pre-set temperature Adjust the desired cooling temperature by pressing the Set Upper or Set Lower buttons. Each depression of the buttons will scroll through the available temperature settings in increments of 1 degree Celsius. The temperature selecte...
Page 14 - IMPORTANT INFORMATION ABOUT TEMPERATURE; Your; reach their full potential.
V40SG2EBK V40SG2ES3 14 User Manual IMPORTANT INFORMATION ABOUT TEMPERATURE Your VINTEC wine cellar has been designed to guarantee optimum conditions for storing and/or serving your wines. Fine wines require long and gentle developments and need specific conditions in which to reach their full potent...
Page 15 - ADJUSTABLE WOODEN SHELVES; you may have to rotate the door through 180 degrees.
V40SG2EBK V40SG2ES3 15 User Manual Notes: During the refrigerating cycle, heat is given off and disperses through the external surfaces of the wine cellar. Avoid touching the surfaces during those cycles. ADJUSTABLE WOODEN SHELVES Adjusting/removing the shelves For easy access to the storage content...
Page 16 - Door limit device
V40SG2EBK V40SG2ES3 16 User Manual V40 S3/BK models 1. Lower hinge (right) 2. Screws 3. Door axis 6. Hinge screws 9. Lower hinge (left) 4. Door 7. Top hinge (left) 10. Door limit device 11. Screw 1. Open the door to a 90 degrees angle, take out the 2 screws (2) from lower door axis (3), remove the d...
Page 17 - OPERATION ANOMALIES; the warranty being considered as null and void.; POWER FAILURES; failure, do take steps to protect your wine.
V40SG2EBK V40SG2ES3 17 User Manual OPERATION ANOMALIES Ensure that there is power to the electrical supply plug by connecting another electrical appliance to it. Check fuse, if any. Make sure that the door is closed properly. If your wine cellar appears to be malfunctioning, unplug it and contact yo...
Page 18 - TROUBLESHOOTING GUIDE
V40SG2EBK V40SG2ES3 18 User Manual TROUBLESHOOTING GUIDE Common problems may easily be solved, saving you the cost of a possible service call. Please read carefully the instruction manual and revert to troubleshooting guide chart. PROBLEM POSSIBLE CAUSE Wine cellar does not operate. Not plugged in. ...
Page 19 - Warranty
This document sets out the terms and conditions of the product warranties for Vintec/Transtherm Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should there be a manufacturing defect in your Appliance. This warranty i...
Page 20 - Service and support; In the rare event that your Vintec cabinet does not perform
vintec.com Vintec. We are part of the Electrolux Family. To add a touch of professional inspiration to your home, visit electrolux.com.au © 2018 Electrolux Home Products Pty Ltd. ABN 51 004 762 341 VMAN_V40s_SG2E_ Jun18 Stay in touch and share your user experience by following us: @vintecclub Servic...
