US Stove Company 5660(I) - Manual

6   SPECIFICATIONS     Heating   Specifications:     Burn   Rate:             *43,900   btu’s   per   hour   or   5.1   lbs.   of   fuel   per   hour   Hopper   Capacity:           55   lbs.     *Dependent   upon   quality   and   heating   value   of   pellet   fuel.     DIMENSIONS     Figure   1  

12      THERMOSTAT   INSTALLATION     Optional   thermostats   are   available   for   use   with   your   pellet   stove.   A   thermostat   can   help   you   maintain   a   constant   room   temperature.   The   thermostat   option   will   require   the   installation   of   a   millivolt   type...

13   USA 6” CANADA 8” USA 6” CANADA 8” CLEARANCES   TO   COMBUSTIBLES   INSTALL   ALL   VENTS   AT   CLEARANCES   SPECIFIED   BY   THE   VENT   MANUFACTURER!     When   your   Pellet   Stove   Room   Heater   is   being   installed   on   a   combustible   floor   it   is   mandatory   that   a   1/...

15   INSTALLING   YOUR   ROOM   HEATER   ‐  continued     HORIZONTAL   EXHAUST   VENT   INSTALLATION     1. Locate   your   pellet   stove   in   a   location   which   meets   the   requirements   of   this   manual,   but   in   an   area   where   it   does   not   interfere   with   the   house ...

17     INSTALLING   YOUR   ROOM   HEATER   ‐  continued   FREESTANDING   INTERIOR   VERTICAL   INSTALLATION     1. Locate   your   Pellet   Stove   Room   Heater   in   a   location   which   meets   the   requirements   of   this   manual,   but   in   an   area   where   it   does   not   interfer...

27   INSERT   PELLET   STOVE   INSTALLATION  ‐  continued     Minimum   Clearance   to   Combustibles   and   Floor   Protection                    A :   Side   wall:   16”   to   side   of   appliance   B :   Top   Trim:   5”   above   top   of   appliance   C :   Side   trim:   10.5”   to   side  ...

30   MAINTENANCE   FAILURE   TO   CLEAN   AND   MAINTAIN   THIS   UNIT   AS   INDICATED   MAY   RESULT   IN   POOR   PERFORMANCE   AND   HAZARDOUS   SITUATIONS.   CLEAN   THE   HEATER   FREQUENTLY   AS   ACCUMULATION   OF   SOOT,   CREOSOTE   OR   FLYASH   MAY   OCCUR.   NEVER   CLEAN   THE   UNIT  ...

32   MAINTENANCE   ‐  continued     Cleaning     Heat   Exchanger   Tubes   –   Your   Pellet   Stove   Room   Heater   is   designed   with   a   built   in   heat   exchanger   tube   cleaner.   This   should   be   used   every   2   or   3   days   to   remove   ash   build   up   on   the   hea...

33   MAINTENANCE   ‐  continued   Chimney/Vent   System   Cleaning:   1. Soot   Formation   –   When   wood   products   are   burned   slowly   they   produce   tar   and   other   organic   vapors   which   combine   with   expelled   moisture   to   form   soot.   The   soot   vapors   condense  ...

39   LIMITED WARRANTY United States Stove Company warrants to the original purchaser its Pellet Heaters against premature failure of any component due to workmanship, quality, or materials as follows: TIME PERIOD: Firebox / Firepot .......................................................................