US Stove Company 1802G - Manual
US Stove Company 1802G – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – USSC; INTRODUCTION; DISCLAIMER NOTICE; REDUCED CLEARANCES
- Page 3 – CHIMNEY REQUIREMENTS
- Page 5 – THE PLENUM OPENINGS DIFFER; RETURN AIR IS VERY IMPORTANT; COMBUSTION AIR
- Page 7 – SPRING HANDLES; All electrical connections should be done by a; WIRING DIAGRAM
- Page 8 – FIREBOX BRICK REPLACEMENT
- Page 9 – GENERAL FURNACE OPERATION; STARTING A COAL FIRE
- Page 10 – OPERATING NOTES
- Page 11 – TROUBLE SHOOTING AND PROBLEM SOLVING
- Page 12 – PARTS DIAGRAM
- Page 13 – PARTS DIAGRAM AND LIST
- Page 14 – UFB908 COLD AIR RETURN / FILTER BOX - OPTIONAL KIT
- Page 15 – DOMESTIC HOT WATER COIL KIT - OPTIONAL; DR6 - 6” DRAFT REGULATOR KIT - OPTIONAL KIT
- Page 18 – NOTES
- Page 20 – HOW TO ORDER REPAIR PARTS; nace, and enable you to order repair parts correctly.; United States Stove Company; 27 Industrial Park Road
1
USSC
851768 rev 0
Model: 1602G / 1802G
Wood or Coal Gravity Style (Up-Flow) Supplemental Furnace
C
S
S
U
C O M PA N Y
UN
ITE
D STATES STOV
E
United States Stove Company
• 227 Industrial Park Road, P.O. Box 151 • South Pittsburg, TN 37380 • www.usstove.com
SAFETY NOTICE:
If this furnace is not properly installed, a house fire may result! For your safety, follow these installation
instructions. Contact local building or fire officials about restrictions and installation requirements in your
area. This furnace must be installed by a qualified technician. Keep these instructions for future reference.
Installation/Operator’s Manual
Safety Tested to UL 391
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 USSC INTRODUCTION Thank You for your purchase of a U.S. Stove Wood/Coal Burning Gravity Style (Up-Flow) Furnace. Your decision to buy our Clayton Furnace was undoubtedly reached af- ter much careful thought and consideration. We are very proud you chose this furnace and trust you will receive the ...
3 USSC CHIMNEY REQUIREMENTS A fireclay lined masonry or Class A 103HT All-Fuel Metal Insulated Chimney must be used in all airtight wood fur- nace installations. The minimum recommended flue size for the model 1602 is 6 inches, inside diameter and for the 1802, the recommended flue size is 8 inches,...
5 USSC INSTALLATION #3 The baffle on this system should be made the full width of the furnace plenum in order to properly direct the air into the distribution ducts. INSTALLATION #2 Extending the hot air duct from the furnace into the existing plenum will help direct the flow of air from the furnace...
