Page 2 - Topic
2 TABLE OF CONTENTS Topic Page(s) Introduction 3 Safety Information 4 ‐ 5 Specifications 6 Dimensions 6 ‐ 7 Operating Instructions ...
Page 3 - Introduction
3 Introduction The entire family of United States Stove Company thanks you for purchasing your new pellet burning room heater. At U.S. Stove, we build all of our products with a hands ‐ on approach to detail and quality. O...
Page 5 - continued
5 SAFETY INFORMATION ‐ continued Keep foreign objects out of the hopper. Contact your local building officials to obtain a permit and information on any installation restrictions or inspection requirements in your area. Be sure ...
Page 6 - SPECIFICATIONS; Heating; DIMENSIONS; Figure
6 SPECIFICATIONS Heating Specifications: Burn Rate: *43,900 btu’s per hour or 5.1 lbs. of fuel per hour Hopper Capacity: 55 lbs. *Dependent upon quality and heating value of pellet fuel. DIMENSIONS Figure 1
Page 12 - Installation
12 THERMOSTAT INSTALLATION Optional thermostats are available for use with your pellet stove. A thermostat can help you maintain a constant room temperature. The thermostat option will require the installation of a millivolt type...
Page 13 - CLEARANCES
13 USA 6” CANADA 8” USA 6” CANADA 8” CLEARANCES TO COMBUSTIBLES INSTALL ALL VENTS AT CLEARANCES SPECIFIED BY THE VENT MANUFACTURER! When your Pellet Stove Room Heater is being installed on a combustible floor it is mandatory that a 1/...
Page 15 - HORIZONTAL
15 INSTALLING YOUR ROOM HEATER ‐ continued HORIZONTAL EXHAUST VENT INSTALLATION 1. Locate your pellet stove in a location which meets the requirements of this manual, but in an area where it does not interfere with the house ...
Page 17 - FREESTANDING
17 INSTALLING YOUR ROOM HEATER ‐ continued FREESTANDING INTERIOR VERTICAL INSTALLATION 1. Locate your Pellet Stove Room Heater in a location which meets the requirements of this manual, but in an area where it does not interfer...
Page 27 - Floor
27 INSERT PELLET STOVE INSTALLATION ‐ continued Minimum Clearance to Combustibles and Floor Protection A : Side wall: 16” to side of appliance B : Top Trim: 5” above top of appliance C : Side trim: 10.5” to side ...
Page 30 - MAINTENANCE
30 MAINTENANCE FAILURE TO CLEAN AND MAINTAIN THIS UNIT AS INDICATED MAY RESULT IN POOR PERFORMANCE AND HAZARDOUS SITUATIONS. CLEAN THE HEATER FREQUENTLY AS ACCUMULATION OF SOOT, CREOSOTE OR FLYASH MAY OCCUR. NEVER CLEAN THE UNIT ...
Page 32 - Cleaning
32 MAINTENANCE ‐ continued Cleaning Heat Exchanger Tubes – Your Pellet Stove Room Heater is designed with a built in heat exchanger tube cleaner. This should be used every 2 or 3 days to remove ash build up on the hea...
Page 33 - System
33 MAINTENANCE ‐ continued Chimney/Vent System Cleaning: 1. Soot Formation – When wood products are burned slowly they produce tar and other organic vapors which combine with expelled moisture to form soot. The soot vapors condense ...
Page 39 - LIMITED WARRANTY
39 LIMITED WARRANTY United States Stove Company warrants to the original purchaser its Pellet Heaters against premature failure of any component due to workmanship, quality, or materials as follows: TIME PERIOD: Firebox / Firepot .......................................................................