Tripp Lite U357-002 - Manual
Tripp Lite U357-002 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – RAID Mode; The enclosure can be set to function in one of four modes; Normal Mode –; ON; JBOD Mode –; RAID 0 Mode –; This mode combines the two hard drives into one large drive for the
- Page 4 – RAID 1 Mode –; This mode creates two mirror disk drives for the purpose of data; section in this manual, powering on the unit.; mode. Once set to RAID 0 mode, you can change to any other mode.; the back of the unit.
- Page 5 – Normal
- Page 6 – Warranty & Warranty Registration
- Page 7 – Notes
1
Owner’s Manual
WARR
ANTY
REGISTR
ATION
Register online today for a
chance to win a FREE T
ripp Lite
product! www
.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2013 Tripp Lite. All rights reserved.
Dual Bay USB 3.0
to SATA Hard Drive
RAID Enclosure
Model: U357-002
Package Contents
2
Features 2
System Requirements
2
RAID Mode
3
Setting the RAID Mode
4
Installation Instructions
5
Warranty & Warranty Registration
6
13-10-121-9332DF.indd 1
10/25/2013 2:43:03 PM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 RAID Mode The enclosure can be set to function in one of four modes; Normal, JBOD, RAID 0, and RAID 1 , giving you the flexibility to access your data in whatever way works best for you. The available modes are described below, with their corresponding dip switch setting displayed on the left side...
4 RAID Mode Setting the RAID Mode RAID 1 Mode – This mode creates two mirror disk drives for the purpose of data redundancy. If one drive fails, the other drive serves as a back-up. When using this mode, it is recommended that you use hard drives with the same capacities. If hard drives of different...
5 Setting the RAID Mode Installation Instructions When Powered Off: 1. Install the hard drives in the enclosure according to the installation instructions in this manual, but do not power on the unit. 2. By default, the dip switches on the back of the unit are both set to the OFF (Up) position, whic...
