Tripp Lite U357-002 - Manuals

Tripp Lite U357-002 – Manual in PDF format online.

Manuals:

Manual Tripp Lite U357-002

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8

Summary

Page 3 - RAID Mode; The enclosure can be set to function in one of four modes; Normal Mode –; ON; JBOD Mode –; RAID 0 Mode –; This mode combines the two hard drives into one large drive for the

3 RAID Mode The enclosure can be set to function in one of four modes; Normal, JBOD, RAID 0, and RAID 1 , giving you the flexibility to access your data in whatever way works best for you. The available modes are described below, with their corresponding dip switch setting displayed on the left side...

Page 4 - RAID 1 Mode –; This mode creates two mirror disk drives for the purpose of data; section in this manual, powering on the unit.; mode. Once set to RAID 0 mode, you can change to any other mode.; the back of the unit.

4 RAID Mode Setting the RAID Mode RAID 1 Mode – This mode creates two mirror disk drives for the purpose of data redundancy. If one drive fails, the other drive serves as a back-up. When using this mode, it is recommended that you use hard drives with the same capacities. If hard drives of different...

Page 5 - Normal

5 Setting the RAID Mode Installation Instructions When Powered Off: 1. Install the hard drives in the enclosure according to the installation instructions in this manual, but do not power on the unit. 2. By default, the dip switches on the back of the unit are both set to the OFF (Up) position, whic...

Tripp Lite Manuals