Tripp Lite BP48V60RT3U - Manual

Tripp Lite BP48V60RT3U – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – COLOR SELECTION; front; mounting; not; attach the
Page 3 – on the; middle; attach the mounting ears to the Battery; To connect a single Battery Pack to a UPS:; Insert; To connect multiple Battery Packs to a UPS:; For; Battery Connection
Page 4 – output voltage at any load. A qualified
Page 5 – SEGURIDAD; INTRODUCTION; Manual de Operación; LISTA DE EMPAQUE
Page 6 – SELECCIÓN DE COLOR; Nota: Los reboses de ambos; frontales; fije las orejuelas de montaje a los hoyos
Page 7 – ubicados a los lados del Banco de Baterías; Figura 1; Conexión de las Baterías
Page 8 – suministrará voltaje
Page 9 – SURETE; Manuel de l’Utilisateur; LISTE DE COLISAGE
Page 10 – SÉLECTION DE LA COULEUR; montage; avant; ) Avec l’aide d’un assistant si nécessaire, levez; Figure 1
Page 12 – ne; fournira

Loading the manual

SAFETY

• Use caution when lifting Battery Pack. Because of the Battery Pack’s considerable weight, at least

two people should assist in lifting and installing it. If rackmounting the Battery Pack, mount it in
the lowest rack space possible.

• Suggested mounting procedures are for common rack types and may not be appropriate for all rack

configurations. User must determine the fitness of mounting hardware and procedures before
mounting.

• When connecting multiple Battery Packs to a single UPS, the Battery Packs should be

approximately the same age.

• It is normal for sparks to occur inside external battery connectors during final battery connection.

• Do not unplug external batteries from the UPS while the UPS is operating on battery power, due

to the possibility of dangerous arcing.

• There are no user-serviceable parts inside the Battery Pack. Do not open the Battery Pack for any

reason.

• Do not attempt to replace internal batteries.

This manual contains important information regarding the safe
installation and operation of the BP48V60RT3U Battery Pack.
Please read this manual and save it for later reference.

INTRODUCTION

The Tripp Lite BP48V60RT3U External Battery Pack has an output voltage of 48 VDC and is designed
for use with various Tripp Lite UPS systems equipped with 48 VDC external battery pack connectors.
When used with appropriate Tripp Lite UPS systems, this Battery Pack meets UL standard 1778. The
BP48V60RT3U may also be suitable for use with 48V DC input telecommunications equipment.

1111 W. 35th Street

Chicago, IL 60609 USA

Customer Support: (773) 869-1234

www.tripplite.com

Owner's Manual

BP48V60RT3U

48 Volt DC Input/Output

External Battery Pack

Rack/Stack/Tower Mount

Español: p. 5

Français: p. 9

PACKING LIST

• Battery Pack

• Screws

• 2 Mounting Ears

• Wing Bolts

• 2 Adjustable Side Supports

• Locking Nuts

• 2 Support Brackets

• Flat Washers

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - COLOR SELECTION; front; mounting; not; attach the

2 COLOR SELECTION The BP48V60RT3U is shipped with matching greyfront panel and grey mounting ears. If you wouldlike your Battery Pack to match black equipment,you may request the alternate (black) front panel for3U battery packs(Tripp Lite part #AC4134) bycalling (773) 869-1234. SUGGESTED RACKMOUNTI...

Page 3 - on the; middle; attach the mounting ears to the Battery; To connect a single Battery Pack to a UPS:; Insert; To connect multiple Battery Packs to a UPS:; For; Battery Connection

3 A B G SUGGESTED RACKMOUNTINSTALLATION FOR 2-POSTENCLOSURES 1) Attach the support brackets (A) to both rack posts (B) with user-supplied rack bolts (C). 2) Attach mounting ears (D) to the mounting holes on the middle of the Battery Pack's sides (E), using the screws and washers provided (F). Do not...

Page 4 - output voltage at any load. A qualified

4 TROUBLESHOOTING There is a fuse array inside each Battery Pack. If a heavy overload or short circuit is encountered, a fusewill open (blow). A Battery Pack with a blown fuse will deliver no output voltage at any load. A qualified technician must replace the fuses. Contact Tripp Lite Customer Suppo...