Tripp Lite SURBC2030 - Manual
Tripp Lite SURBC2030 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Adding or Replacing Internal Batteries; DO NOT REMOVE BATTERY SLEEVE!; CHECK BATTERY PACK VOLTAGE BEFORE COMPLETING INSTALLATION
- Page 4 – FUSE REPLACEMENT
- Page 5 – OBSERVE PROPER POLARITY!; Warranty & Warranty Registration; LIMITED WARRANTY
- Page 6 – Manual del Propietario; Módulos de Baterías Internas; Para usarse con los Sistemas UPS SmartOnline; Advertencias de Seguridad Importantes
- Page 7 – Añadiendo o Remplazando las Baterías Internas; ¡NO REMUEVA LA CUBIERTA PROTECTORA DE LA BATERIA!
- Page 9 – REMPLAZO DE LOS FUSIBLES
- Page 10 – ¡OBSERVE LA POLARIDAD CORRECTA!; Garantía; GARANTIA LIMITADA
- Page 11 – Manuel du propriétaire; Bloc-batteries internes; Pour les systèmes d'onduleur Tripp Lite SmartOnline; Importantes consignes de sécurité
- Page 12 – Ajout et remplacement des batteries internes; NE PAS RETIRER LA GAINE DE BATTERIE!
- Page 14 – REMPLACEMENT DE FUSIBLE
- Page 15 – OBSERVER LA BONNE POLARITÉ!; Garantie; GARANTIE LIMITÉE À VIE
Owner’s Manual
1111 W. 35th Street • Chicago, IL 60609 USA
(773) 869-1234 • www.tripplite.com
Copyright ©2007 Tripp Lite. All rights reserved.
SmartOnline™ is a trademark of Tripp Lite.
Internal Battery Packs
For use with Tripp Lite SmartOnline
™
3-Phase
UPS Systems that accept internal battery pack connection.
Model #: SURBC2030
W
arranty
Registration:
register online toda
y f
or a c
hance
to win a FREE
Tripp Lite pr
oduct—
www
.tripplite
.com/warranty
Important Safety Warnings
Adding or Replacing Internal Batteries
Warranty & Warranty Registration
1
2
5
Español
6
Français
11
Important Safety Warnings
SAVE THESE INSTRUCTIONS! This owner's manual contains important instructions and warnings that must be followed during the installation and
operation of SURBC2030 Internal Battery Packs. The owner's manuals included with compatible products (UPS systems and battery module
compartments) include additional safety instructions that must be followed during installation and operation. Failure to heed these instructions may
cause permanent damage to the UPS system (voiding its warranty) and create a potential for serious personal injury or death from lethal high voltage.
• Do not use Tripp Lite UPS Systems or Internal Battery Packs in life support applications in which a malfunction or failure of a Tripp Lite UPS
System or Internal Battery Pack could cause failure or significantly alter the performance of a life support device.
• The UPS system contains its own energy source (battery). The output terminals may be live even when the UPS is not connected to an AC supply.
• Your UPS does not require routine maintenance. Do not open the UPS's power module for any reason; there are no user-serviceable parts inside.
Because of the risk of electrical shock, only qualified electricians should open the battery module.
• Because the batteries present a risk of electrical shock and burn from high short-circuit current, batteries should be changed only by trained service
personnel observing proper precautions. Remove watches, rings, and other metal objects. Use tools with insulated handles. Wear rubber gloves and
boots. Do not lay tools or metal parts on top of the batteries. Do not short or bridge the battery terminals with any object.
• Do not dispose of the batteries in a fire. The UPS batteries are recyclable. Refer to local codes for disposal requirements, or in the USA only, refer to
these sources for recycling information: 1-800-SAV-LEAD (1-800-728-5323), 1-800-8-BATTERY (1-800-8-228-8379), or www.rbrc.com.
• Internal batteries must be replaced by equivalent batteries available from Tripp Lite.
• Do not operate your UPS without batteries.
• Battery fuses should be replaced only by factory authorized personnel. Blown fuses should be replaced only with fuses of the same number and type.
• Potentially lethal voltages exist within this unit as long as the battery supply is connected. Service and repair should be done only by trained
personnel. During any service work, the UPS should be turned off or put into manual bypass.
• Do not connect or disconnect the battery modules while the UPS is operating from the battery supply or when the unit is not in bypass mode.
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
UPS System Battery Back Connector White wire Blue wire UPS System Battery Back Connector Fuse Block Bracket Red wire (+) Black wire (–) 2 Adding or Replacing Internal Batteries DANGER! POTENTIALLY LETHAL HIGH VOLTAGE! FOR QUALIFIED ELECTRICIANS ONLY! Follow all safety precautions in the Safety secti...
4 Slide the battery string with the BLACK cable next to it (on the left) in the empty slot as shown. Make sure that the string is oriented asshown in the diagram . 8A 8 8A Replace the fuse block bracket. Make sure printing on bracket isoriented so it is readable. 9 TERMINALS Adding or Replacing Inte...
5 Adding or Replacing Internal Batteries (continued) Connect the BLACK cable for each internal battery pack to the nearest BLACK connector located inside the UPS system's battery module. Connect the RED cable for each internal battery pack to the nearest RED connector located inside the UPS system's...