Tripp Lite BP36V142U - Manual
Tripp Lite BP36V142U – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – OR
- Page 4 – BATTERY PACK CONNECTION; have a blue 175-amp polarized plug
- Page 5 – output voltage at any load. A qualified
- Page 6 – INTRODUCCION; de las baterías. Esto podría producir arcos peligrosos.; LISTA DE EMPAQUE; Panel Frontal Alternativo
- Page 9 – CONEXION DEL BANCO DE BATERIAS; Los Bancos de Baterías modelo BP48V24-2U; incluyen un
- Page 11 – INTRODUCTION; LISTE DE COLISAGE
- Page 13 – OU
- Page 14 – Les Paquets de Batterie BP48V24-2U; ont une prise bleue polarisée
1
Owner’s Manual
BP36V14-2U
BP48V24-2U
BP72V12-2U
External Battery Packs
ESPAÑOL: p. 6
FRANÇAIS: p. 12
1111 W. 35th Street
Chicago, IL 60609 USA
Customer Support: (773) 869-1234
www.tripplite.com
INTRODUCTION
Tripp Lite External Battery Packs have output voltages of either 36 volts (BP36V14-2U), 48 volts
(BP48V24-2U) or 72 volts (BP72V12-2U) and are designed for use with various Tripp Lite UPS systems
equipped with external battery pack connectors. When used with the appropriate Tripp Lite UPS, they meet
UL standard 1778. The BP48V24-2U may also be suitable for use with 48V DC input telecommunications
equipment.
SAFETY
• Use caution when lifting Battery Packs. Because of the considerable weight of all Rackmount
Battery Packs, at least two people should assist in lifting and installing them.
• 36V and 72V Battery Packs and UPS systems use identical power cables and plugs; make
certain that your Battery Packs and UPS use the same DC voltage before connecting them.
• Suggested mounting procedures are for common rack types and may not be appropriate for all rack
configurations. User must determine the fitness of rack- and wallmount hardware and procedures
before mounting.
• When connecting multiple Battery Packs to a single UPS, the Battery Packs should be approximately
the same age.
• It is normal for sparks to occur inside external battery connectors during final battery connection.
• Do not unplug external batteries from the UPS while the UPS is operating on battery power, due to
the possibility of dangerous arcing.
• There are no user-serviceable parts inside the Battery Packs. Do not open the Battery Packs for
any reason.
• Battery Replacement must be performed by factory authorized service personnel. Because batteries
present a risk of electrical shock and burn from high short-circuit current, observe proper precautions.
Unplug the Battery Pack from the UPS before performing battery replacement. Do not short or bridge
battery terminals with any object. Use tools with insulated handles. Remove metal objects such as
watches and rings before working with batteries. Do not open batteries. Replace batteries only with
sealed lead-acid batteries of the same number, type, voltage and amp hour capacity.
• Do not dispose of batteries in a fire. The batteries are recyclable. Proper disposal of batteries is required;
refer to your local codes for disposal requirements. In the USA only, you may call 1-800-SAV-LEAD
(1-800-728-5323) for complete recycling information.
PACKING LIST
• Battery Pack
• BP48V24-2U only:
Alternate Front Panel
• 4 Mounting Ears
(2 black, 2 grey)
• 2 Mounting Extensions
• Screws
• Wing Bolts
• Locking Nuts
• Flat Washers
Copyright © 2000 Tripp Lite. All rights reserved.
200005167 Rackmount Battery Pack Manual (Revised).p65
8/15/00, 12:50 PM
1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 SUGGESTEDINSTALLATION FOR 2-POSTRACK ENCLOSURES 1) On both sides of your Battery Pack, connectone mounting ear (A) with four screws and flatwashers (B) to the Battery Pack's middle fourmounting holes. The mounting surface of theear should face the front of the Battery Pack. 2) Have one or more ass...
4 BP48V24-2U SUGGESTED TOWERINSTALLATION 1) On one side of your battery pack, connect one mountingear (A) to the Battery Pack's four front mounting holes andanother mounting ear (B) to the four rear mounting holes,using four screws and flat washers (C) with each ear. Theends of the mounting ears sho...
5 TROUBLESHOOTING There is a fuse array inside the Battery Packs. If a heavy overload or short circuit is encountered, a fusewill open (blow). A Battery Pack with a blown fuse will deliver no output voltage at any load. A qualified technician must replace the fuses. Contact Tripp Lite Customer Suppo...
