Tripp Lite BC Pro - Manual
Tripp Lite BC Pro – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Important Safety Instructions; UPS Location Warnings; Quick Installation; SAVE THESE INSTRUCTIONS
- Page 3 – Tel/DSL Surge Suppression; Basic Operation; Buttons; Indicator Lights
- Page 4 – Other UPS Features
- Page 5 – Manual del usuario; BC Pro; Sistemas de energía ininterrumpible de 120V de entrada/salida; English
- Page 6 – Instalación rápida; Advertencias sobre la colocación del UPS; Importantes instrucciones de seguridad; GUARDE ESTAS INSTRUCCIONES
- Page 7 – Luces indicadoras; Operación básica; Botones
- Page 8 – Almacenamiento y servicio; Otras características del sistema UPS
- Page 9 – Guide de l'utilisateur; Systèmes UPS de secours à entrée et sortie de 120 V
- Page 10 – Installation rapide; Mises en garde relatives à l'emplacement du système UPS; Importantes consignes de sécurité; GARDEZ CES INSTRUCTIONS EN UN LIEU SÛR
- Page 11 – Voyants lumineux; Exploitation de base; Commutateurs
- Page 12 – Entreposage et entretien; Autres fonctions
- Page 13 – Spécifications
Owner’s Manual
1111 W. 35th Street Chicago, IL 60609 USA
Customer Support: (773) 869-1234 • www.tripplite.com
Important Safety Instructions
2
Quick Installation
3
Basic Operation
4
Storage & Service
7
Specifications
8
BC Pro
®
120V Input/Output Standby UPS Systems
Copyright © 2003 Tripp Lite. All rights reserved. BC Pro
®
is a registered trademark of Tripp Lite.
Español
9
Français
17
UL1778
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Important Safety Instructions 2 UPS Location Warnings • Install your UPS indoors, away from excess moisture or heat, conductive contaminants, dust or direct sunlight. • For best performance, keep the indoor temperature between between 32º F and 104º F (0º C and 40º C). • Leave adequate space around ...
Cold-Start Your UPS: You may “cold start” your UPS and use it as a stand-alone power source when utility power is not present, providing thatthe UPS battery is charged. To “cold start” your UPS, press and hold the ON/OFF button until you hear a beep (about 2 seconds), then release it. The “ ” indica...
7 BATTERY CHARGE: This red light will turn ON continuously after the UPS runs a self-test to indicate that the UPS’s battery is weaklycharged. If it remains lit after you have allowed the UPS to charge fortwelve hours and run a second self-test, contact Tripp Lite for service. LOW/HIGH INPUT VOLTAGE...
