Tripp Lite B126-4X4 - Manual
Tripp Lite B126-4X4 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – routed to multiple outputs
- Page 3 – Product Features; • Add up to three repeaters on each channel of the matrix switch, for a; Optional Accessories:
- Page 4 – Mounting; different mounting methods.; Wallmount 1
- Page 5 – Standard Installation; to a
- Page 7 – Remote Repeater Installation; Make sure all devices being connected are turned off.
- Page 8 – ports that have devices connected
- Page 9 – ports on the switch.; remote control of the desired; section in this manual for details on
- Page 12 – of sw1 A would display source A on output 1.
- Page 13 – Troubleshooting
- Page 14 – causing poor performance. If you have a patch panel or other device
- Page 15 – Warranty & Warranty Registration; -Year Limited Warranty
- Page 16 – WARRANTY REGISTRATION; WARNING
1
Owner’s Manual
HDMI Over Cat5
Matrix Switch
Models: B126-2X2, B126-4X4
1111 W. 35th Street, Chicago, IL. 60609 • www.tripplite.com/support
Copyright © 2013 Tripp Lite. All rights reserved.
Package
Contents 2
Product Features
2
Mounting
4
Standard
Installation
5
Remote Repeater Installation
7
RS232
Serial
Control
10
Troubleshooting
13
Warranty & Warranty Registration
15
WARR
ANTY
REGISTR
ATION
Register online today for a
chance to win a FREE T
ripp Lite
product www
.tripplite.com/warranty
13-11-140 93-32BB.indd 1
11/19/2013 4:57:38 PM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Package Contents Product Features • B126-2X2 or B126-4X4 Local Transmitter Unit• External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output B126-2X2: 5V, 2A; Output B126-4X4: 5V, 3A) • 3.5 mm to DB9 Adapter Cable• Mounting Hardware• Remote Control• Owner’s Manual • Share multiple HDMI sources be...
3 Product Features • Add up to three repeaters on each channel of the matrix switch, for a total of 4 displays per channel (An active remote receiver should be the last unit in a channel) • A 1080p @ 60Hz signal can be extended up to 125 ft. for each repeater added into a channel (or up to 175 ft. f...
4 Mounting The B126-2X2 and B126-4X4 come with mounting hardware that allows them to be mounted in a variety of ways. The following images show the different ways the included mounting brackets can be attached for different mounting methods. Note: The images below show a B126-1A1 HDMI over Cat5 Rece...
