Toshiba B-EP4DL User Manual - Free PDF Download

Page 7 - Part Names

Part Names B-EP2DL Series Top Cover RS-232C Port (GH20 only) Peel-off Roller Platen IrDA Window Top Cover Open Button Operation Panel Strap Slot USB Port Peel-off Roller Cover DCIN Connector Battery Lever Battery Pack Print Head Belt Clip Screws Print Head Cleaner Media Guide Roller Media Sensor

Page 9 - Operation Panel Functions

Operation Panel Functions No. Name/Icon Function/Usage Liquid Crystal Display (16 lines x 2 lines) Upper line: Icons indicating the printer statuses, such as the radio intensity, battery level, etc. are displayed. Lower line: Printer status is indicated in alphanumerals or symbols. ON LINE The print...

Page 10 - Loading a battery pack; Notice

(11) ［ POWER ］ button Turns on or off the printer. How to turn on the printer While the printer is off, hold down the POWER button for a few seconds. When “ONLINE” is displayed on the LCD, the printer is ready. How to turn off the printer Hold down the POWER button until the LCD goes off. (12) [FEED...

Page 12 - Loading the Media

Loading the Media 1. Press the Top Cover Open Button to open the Top Cover. ［ B-EP2DL Series ］［ B-EP4DL Series ］ 2. Move the Paper Guide Lever toward the Operation Panel and the Paper Guides outward. 3. Place a media roll in the printer. 4. Adjust the Paper Guides to the media roll width. 5. Push b...

Page 13 - Before using a peel-off unit

Before using a peel-off unit When issuing labels in the peel-off mode, pull out the peel-off roller before loading a label roll. Open the Top cover, and push the Peel-off Cover by the ▲ marks with your thumbs in the direction of the arrow. Pull the Peel-off Roller until it clicks. Refer to “Loading ...

Page 14 - How to attach the accessories; Belt Clip

How to attach the accessories Belt Clip When you use the printer fixing to your belt, secure the supplied Belt Clip to the printer back. 1. Secure the Belt Clip to the printer back with the two screws. 2. Fasten the Belt Clip to your belt. Shoulder Strap (Option) Use the following procedure to f...

Page 16 - CARE/HANDLING OF THE MEDIA

CARE/HANDLING OF THE MEDIA • Do not store the media for longer than the manufactures recommended shelf life. • Store media rolls on the flat end, do not store them on the curved sidesas this might flatten that side causing erratic media advance and poorprint quality. • Store the media in plastic bag...

Page 17 - Data Transmission; IrDA

Data Transmission IrDA 1. Place the printer close to the host so that their IrDA windows face each other within 10 cm distance. 2. Turn on the printer and the host, and send data from the host to the printer. Notice While communicating, avoid location where the IrDA window is subjected to direct s...

Page 19 - Daily maintenance; Print head

Daily maintenance To help retain the high quality and performance of your printer, it should be cleaned regularly cleaned. Print head Wipe the print head element with a supplied print head cleaner pen. CAUTION! • DO NOT USE a sharp object to clean the print head, as this may cause a print failure ...

Page 21 - Troubleshooting; If an error message is displayed.

Troubleshooting When a problem occurs during operation, please check the following troubleshooting guide and take corrective action. If you cannot solve a problem with the following solutions, do not attempt to repair it by yourself. Turn off the printer, remove the battery pack, then contact a TOSH...

Page 24 - Printer Specification; Supplement

Printer Specification B-EP2DL Series Model B-EP2DL-GH20-QM-R B-EP2DL-GH30-QM-R B-EP2DL-GH40-QM-R Driving power source Lithium ion battery 7.4 Ｖ 2600mAh （ Nominal value ）（ Battery pack model name: B-EP802-BT-QM-R ） Printable count Max. nn /Full charge （ It depends on the operating environment, print...

Page 27 - elektrische en elektronische apparatuur WEEE)

Español Nederlands Italiano La siguiente información solo concierne a los Estados Miembros de la UE: Desechado de los productos (basado en la Directiva Europea 2002/96/EC, Directiva sobre Residuos de equipos eléctricos y electrónicos – WEEE) El uso de este símbolo indica que el producto no puede ser...