Thermador UCV45 - Manual

This Installation Manual covers the Thermador Universal Cook’n’Vent system, designed for residential cooktops with models UCV30, UCV36, and UCV45. The guide addresses both integral (under-cabinet) and remote blower setups, including critical requirements like duct sizing, electrical wiring standards, and safety compliance. It emphasizes proper ventilation planning–such as minimizing drafts and ensuring outdoor venting–and provides detailed specifications for cutouts, clearance dimensions, and component compatibility across different models. Key topics include installation planning (blower placement, cabinet space), ductwork configurations (roof or wall-mounted), electrical wiring (color-coded connectors, wire gauges), and alignment checks to prevent interference with gas/electric systems. The manual also references performance calculations for ventilator components like elbows and dampers.

Page 1 – Installation Requirements for Universal Cook'n'Vent Models
Page 2 – Safety Instructions and Installation Overview
Page 3 – Universal Cook'n'Vent System Components and Setup
Page 4 – Planning Procedures for Vent System Installation
Page 5 – Cooktop Installation Dimensions and Specifications
Page 6 – Ducting Installation Configurations
Page 7 – Ventilator Performance Calculation and Fittings
Page 8 – Ductwork and Countertop Cutout Preparation
Page 9 – Cooktop Installation Dimensions and Layout
Page 10 – Integrating Cooktops with Other Brands
Page 11 – Cabinet Cutout Preparation Details
Page 12 – Ductwork, Electrical, and Mounting Procedures
Page 13 – Blower and Ductwork Mounting Instructions
Page 14 – Vent System Verification and Final Alignment

Loading the manual

For Integral Blower Installations:

• Requires Integral Blower: Model # VTN600CVA
• Requires Round Duct Size (6" Diam.)
• Requires Dedicated Branch Circuit Power Supply • 120 Volt AC•

min. 15 Amps., 3 prong receptacle • 60 Hz.

• See Steps 3 and 5 for electrical receptacle and duct outlet location

For Remote Blower Installations:

• Requires Remote Blower: Model # VTR1000Q or VTR600R
• Requires Duct Transition: Model # CVT314 (for 3

-1

" x 14" duct) or

Model # CVT7 (for 7" Diam. Round)

• Requires 4 wires and 1 ground wire connecting blower and vent
• Requires Dedicated Branch Circuit Power Supply • 120 Volt • 15 Amps.,

3 prong receptacle • 60 Hz., AC.

For CVT314:

• Recommend 3

-1

" x 14" to 10" diam. transition for VTR1000Q Remote Blower

• Recommend 3

-1

" x 14" to 8" diam. transition for VTR600R Remote Blower

For CVT7:

• Recommend 7" diam. to 10" diam. transition for VTR1000Q Remote Blower
• Recommend 7" diam. to 8" diam. transition for VTR600R Remote Blower
• See Steps 3 and 5 for electrical receptacle and duct outlet location

UNIVERSAL COOK’N’VENT

INSTALLATION INSTRUCTIONS

MODELS: UCV30 • UCV36 • UCV45

Rating: 120 Volt, 60 Hz., 10.0 Amps.

INSTALLATION MUST COMPLY WITH ALL APPLICABLE CODES.

PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING.

MPORTANT:

Save these instructions for the local electrical inspector's use.

INSTALLER:

Please leave these Installation Instructions with this unit for the owner.

OWNER:

Please retain these instructions for future reference.

SAFETY WARNING:

Disconnect power by removing plug from receptacle before installing
or servicing this unit.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Was this manual helpful?

About this manual

Brand: Thermador
Model: UCV45
Document type: Manual
Language(s): English
Pages: 16
File size: 3.4 MB
Format: PDF

Summary

Page 1 - Installation Requirements for Universal Cook'n'Vent Models

Installation instructions for Thermador Universal Cook'n'Vent models UCV30, UCV36, and UCV45, detailing requirements for integral and remote blower installations, necessary components, electrical supply specifications, wire requirements, and safety warnings.

Page 2 - Safety Instructions and Installation Overview

Table of Contents and critical safety instructions for ventilation product installation, including requirements for qualified installation, proper outdoor venting, and specific blower model compatibility.

Page 3 - Universal Cook'n'Vent System Components and Setup

Description of the ventilator intake and blower components, explanation of integral versus remote blower mounting, requirement for duct transitions in remote setups, available sizes (30, 36, 45-inch), trim colors, residential application restriction, and system diagrams.