Texas Instruments TUSB3410 - Manual

Page 5 - Preface; Read This First; About This Manual; Related Documentation From Texas Instruments

Related Documentation From Texas Instruments v Preface Read This First About This Manual This user’s guide describes the setup and operation of the TUSB3410 general-purpose input/output evaluation board. Familiarity with the universal serial bus(USB) protocol and common lab testing equipment is requ...

Page 7 - Contents; Required Hardware and Software; Figures

Contents vii Contents 1 Required Hardware and Software 1-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 Hardware Items 1-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Page 9 - Topic; Chapter 1

1-1 Required Hardware and Software Required Hardware and Software The TUSB3410 general-purpose input-output EVM was designed for use witha personal computer running a USB-enabled operating system. The PCshould be USB 1.1 or USB 2.0 spec compliant. This implies the BIOS, chip-sets, and operating syst...

Page 11 - Hardware Overview; Figure 1–2. TUSB3410 GPIO Evaluation Board

Hardware Overview 1-3 Required Hardware and Software 1.2 Hardware Overview The TUSB3410 GPIO EVM hardware platform is 4,3 cm × 6,8 cm in width × length. Throughout this document, text inside of parentheses (ex.) is referencedesignators found on the TUSB3210 EVM. See Figure 1–2 for a referencepicture...

Page 13 - EVM Operation; Chapter 2

2-1 EVM Operation EVM Operation This chapter provides information required for proper operation of theTUSB3410 GPIO EVM. This includes power and PC connection require-ments, as well as descriptions of important operating features of the board,such as switches, jumpers, and indicators. Topic Page 2.1...

Page 14 - Power Supply; Buttons; Table 2–1. Button Description; Table 2–2. LED Description

TUSB3410 EVM Setup 2-2 2.1 TUSB3410 EVM Setup The TUSB3410 general-purpose EVM is designed to support many USBapplications. The EVM comes in a default configuration that requires noadditional components on the EVM. A full description of the TUSB3410 deviceis specified in the data manual. The PC must...

Page 15 - Jumpers; Table 2–3. Jumper Description; EEPROM

Jumpers 2-3 EVM Operation 2.6 Jumpers Table 2–3 is provided to help set up and configure the EVM platform jumpersfor the desired mode of operation. The EVM can download firmware code fromthe PC through a loading program (may or may not be supplied with your EVM)or from an I 2 C EEPROM. JP2 and JP3 a...

Page 17 - Bill of Materials and EVM Layouts; Chapter 3

3-1 Bill of Materials and EVM Layouts Bill of Materials and EVM Layouts This chapter describes the bill of materials and EVM layouts for the TUSB3410EVM. Topic Page 3.1 Bill of Materials 3-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.2 EVM Layouts...

Page 19 - EVM Layouts; Figure 3–1. Top Layer

EVM Layouts 3-3 Bill of Materials and EVM Layouts 3.2 EVM Layouts Figure 3–1. Top Layer Figure 3–2. Bottom Layer

Page 21 - TUSB3410 GPIO EVM Schematic Diagram; Appendix A

A-1 TUSB3410 GPIO EVM Schematic Diagram TUSB3410 GPIO EVM Schematic Diagram Appendix A

Texas Instruments TUSB3410 - Manual

Table of Contents:

Summary

Other Texas Instruments Models