Texas Instruments TR-525USW - Manual

FIELD CALIBRATION TR-525I & TR-525M Absolutely accurate calibration can be obtained only with laboratory equipment, but an approximate field check can be easily made. The tipping bucket mechanism is a simple and highly reliable device. The transmitter must be located in a clear area, away from t...

MODEL TTH-1315 TEMPERATURE HUMIDITY SENSOR DESCRIPTION The Texas Electronics, Inc. Model TTH-1315 Sensor utilized a Rotronics HygroClip S3 Humidity Temperature Probe with interchangeable sensing elements that do not require calibration. The unit is encased in a corrosive-resistant spun aluminum radi...

Sampling Time: <0.7 sec Maximum cable length: 5 m / 15 ft. for direct output Up to 100 m / 325 ft. with signal amplifier Connection Type: Bayonet cap on mounting connector Protection grade: IP65 (probe to connector) Supply voltage: 3.5 … 50VDC Current consumption: <4 mA Minimum excitation time...

MODEL TD-4 WIND DIRECTION SENSOR DESCRIPTION The Texas Electronics, Inc. TD-4 Wind Direction Sensor is a mechanical style wind meter that measures the horizontal wind azimuth. This unit combines small physical size with superior bearings to meet the EPA's Prevention of Significant Deterioration (PSD...

MODEL TV-4 WIND SPEED SENSOR DESCRIPTION The Texas Electronics, Inc. TV-4 Wind Speed Sensor is a mechanical style anemometer that measures the horizontal velocity of wind. This unit combines small physical size with superior bearings to meet the EPA's Prevention of Significant Deterioration (PSD) st...

MODEL SP-LITE SOLAR RADIATION SENSOR DESCRIPTION The Texas Electronics, Inc. SP-Lite Solar Radiation Sensor utilizes a Kipp & Zonen Silicon pyranometer mounted in a white baked-enamel finished aluminum bracket that provides a stable upward-facing installation. It measures the solar energy that i...

Mechanical: Material of housing: Anodized aluminum contained in white baked-enamel finished aluminum mounting bracket Cable length: 60 ft. Dimensions: Height from surface to top of level Pyranometer - - 6.25" (15.87 cm) Width - 2.75 " (6.98 cm) Length - 8.25 " (20.95 cm) Weight: 3 lbs. (...

Texas Electronics, Inc. Texas Electronics, Inc. Texas Electronics, Inc. Texas Electronics, Inc. Model TB-2012M Barometer Model TB-2012M Barometer Model TB-2012M Barometer Model TB-2012M Barometer Remove cover of TB-2012M and adjust Remove cover of TB-2012M and adjust Remove cover of TB-2012M and adj...

PROPER EXPOSURE OF METEOROLOGICAL INSTRUMENTS Generally recognized guidelines follow which depict "ideal" sensor mounting locations. These guidelines or "rules of thumb" are only suggestive in nature in an attempt to aid the user to selecting optimum representative sampling locations...

PRECIPITATION GAUGES: Rain gauges should be installed on a level plot of ground, at a distance from any object of at least two and preferably four times the height of the object above the top of the gauge. All types of gauges must be exposed with the rim of the receiver in a horizontal plane and at ...

Warranty Texas Electronics, Inc. (hereafter TEI) warrants the equipment manufactured by it to be free from defects in material and workmanship. Upon return, transportation charges prepaid to TEI, within three (3) years of original shipment of sensors and one (1) year of original shipment of electron...

Three-Year Warranty Equipment List Effective February 1, 1992 all of Texas Electronics, Inc. sensors will carry a Three-Year warranty instead of the previous One-Year. The remainder of terms and conditions of the warranty remains unchanged. A specific list of items follows. Sensors Covered by Three-...