Page 2 - Submit Documentation Feedback
2 SLLU106 – August 2008 Submit Documentation Feedback
Page 3 - Contents; Table of Contents
Contents 1 Related Documentation from Texas Instruments ...................................................................... 5 1.1 Additional Documentation ................................................................................................ 5 2 Overview ...................................
Page 4 - List of Figures
www.ti.com List of Figures 1 Physical Structure for TAS5102/3EVM ................................................................................... 6 2 Modulator and Power Stage Board Connection Example .............................................................. 7 3 TAS5086 GUI Window .............
Page 5 - Related Documentation from Texas Instruments; Additional Documentation; Overview; TAS5103 Digital Amplifier Power Output Stages; Table 1; Table 1. Related Documentation From Texas; Part Number
1 Related Documentation from Texas Instruments 1.1 Additional Documentation 2 Overview User's Guide SLLU106 – August 2008 TAS5102EVM and TAS5103EVM for the TAS5102 and TAS5103 Digital Amplifier Power Output Stages This user's guide describes the operation of the TAS5102 and TAS5103 evaluation module...
Page 6 - PCB Key Map; SPDIF Receiver; Standard I; Figure 1. Physical Structure for TAS5102/3EVM
2.1 TAS5102EVM and TAS5103EVM Features 2.2 PCB Key Map SPDIF Receiver 3.3V SMPS USB Controller TAS5086 TAS5102 Power Supply Overview www.ti.com The TAS5103 is a compact, high-power, digital amplifier power stage designed to drive an 8- Ω loudspeaker up to 15 W/channel at 10% THD+N. It contains integ...
Page 7 - CAUTION
3 Quick-Setup Guide 3.1 Electrostatic Discharge Warning 3.2 Unpacking the EVM 3.3 Power Supply Setup www.ti.com Quick-Setup Guide This section describes the TAS5102/3EVM board in regards to power supplies and system interfaces. Itprovides information regarding handling and unpacking, absolute operat...
Page 8 - GUI Software Installation; Table 2. Recommended Supply Voltage; Description; Output stage power supply; Table 2
3.4 GUI Software Installation Quick-Setup Guide www.ti.com Table 2. Recommended Supply Voltage Description Voltage Limitations Current Requirement Connector Output stage power supply 8 V – 23 V 5 A Red/black CAUTION Applying voltages above the limitations given in Table 2 can cause permanent damage ...
Page 9 - Operational Sequence and Indicators; System Interfaces; Load the configuration file.; Table 3. Recommended Supply Voltages; Voltage Limitations
3.5 Operational Sequence and Indicators 4 System Interfaces 4.1 Power Supply (PSU) Interface (PVDD and GND) www.ti.com System Interfaces • After connecting the power supply and turning it on, the power supply current must be ~50 mA. Theamplifier reset LED must be on. – The PVDD and 3.3-V LEDs must b...
Page 10 - J1 Amplifier Connection to MC012 Controller Module; The recommended TAS5102/3 power-up sequence is shown in; Table 4. J9/J10 Pin Description Amplifier/Controller Connector; Net-Name at Schematics
Output stage power supply RESET >1 ms System power supply 4.2 J1 Amplifier Connection to MC012 Controller Module 4.3 Loudspeaker Connectors (J3 - J6) System Interfaces www.ti.com The recommended TAS5102/3 power-up sequence is shown in Figure 4 . For proper TAS5102/3 operation, the RESET signal sh...
Page 11 - Short-Circuit Protection and Fault-Reporting Circuitry; Protection; Table 6. TAS5102 Warning/Error Signal Decoding; FAULT; Junction temperature lower than 125
4.4 SPDIF Optical Input Connector 4.5 SPDIF Co-Axial Input Connector 4.6 USB Connector 5 Protection 5.1 Short-Circuit Protection and Fault-Reporting Circuitry 5.2 Fault Reporting www.ti.com Protection This connector is a standard TOSLINK connector that connects the SPDIF digital audio input to the S...
Page 12 - Appendix A Design Documents; Appendix A; Design Documents
Appendix A Design Documents A.1 HPL-MC012 Schematic of Filename: Mod: PCBRev: Sheet SaveDate: CX SchematicRev: Design T eam: DrawnBy: TI PrintDate PROJECT : of Filename: Mod: PCBRev: Sheet SaveDate: CX SchematicRev: Design T eam: DrawnBy: TI PrintDate PROJECT : 1 1 1 0 0 0 0 1 1 0 0 1 0 1 I I O O O ...
Page 13 - USBINPUT
of Filename: Mod: PCBRev: Sheet SaveDate: CX SchematicRev: Design T eam: DrawnBy: TI PrintDate PROJECT : of Filename: Mod: PCBRev: Sheet SaveDate: CX SchematicRev: Design T eam: DrawnBy: TI PrintDate PROJECT : NC 4 USBIN T O NC NC 2 LDN CONTROLLERFOR T AS5132DDV2EVM I2SIN AMP USBLINK MUTE T ueDec19,...
Page 14 - HPL-MC012 Composite Drawings
A.2 HPL-MC012 Composite Drawings HPL-MC012 Composite Drawings www.ti.com Design Documents 14 SLLU106 – August 2008 Submit Documentation Feedback
Page 19 - Heat Sink Drawing
A.5 Heat Sink Drawing A.6 Parts List www.ti.com Heat Sink Drawing Table A-1. Bill of Materials for HPL-MC012 Description RefDes QTY MFG MFG Part# PWM MODULATOR, 6 CH, TSSOP38-DBT U4 1 Texas Instruments TAS5086DBT USB, GENERAL PURPOSE DEVICE U3 1 Texas Instruments TUSB3210PM CONTROLLER, LQFP64-PM Sin...
Page 20 - Parts List
Parts List www.ti.com Table A-1. Bill of Materials for HPL-MC012 (continued) Description RefDes QTY MFG MFG Part# LED, Red SM1206 LED5 1 Chicago Miniature CMD15-21VRD/TR8 LED, Yellow SM1206 LED4 1 Chicago Miniature CMD15-21VYD/TR8 LED, Green SM1206 LED7 1 Chicago Miniature CMD15-21VGD/TR8 CAP 22PFD ...
Page 21 - Table A-2. Bill of Materials for TAS5103EVM
www.ti.com Parts List Table A-1. Bill of Materials for HPL-MC012 (continued) Description RefDes QTY MFG MFG Part# RES 0.05 OHM 1/4W 1% SMD 0805 R38 1 Vishay/Dale WSL0805R0500FEA18 RES 2.7 OHM 1/10W 5% SMD 0805 R55, R61 2 Panasonic ERJ-6RQJ2R7V RES 3.3 OHM 1/10W 5% SMD 0805 R39, R42, R70 3 Panasonic ...
Page 22 - Table A-3. Bill of Materials for TAS5102EVM
Parts List www.ti.com Table A-2. Bill of Materials for TAS5103EVM (continued) Description RefDes QTY MFG MFG Part# CAP 47UFD 16V RAD ALUM ELEC FC C38 1 Panasonic EEU-FC1C470 CAP 220UFD 35V ALUM ELEC M-SERIES C2, C18, C22 3 Panasonic ECA-1VM221BJ ROHS CAP 330UFD 35V ALUM ELEC M-SERIES C6 1 Panasonic ...
Page 24 - EVALUATION BOARD/KIT IMPORTANT NOTICE; FCC Warning; ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES; EVM WARNINGS AND RESTRICTIONS
EVALUATION BOARD/KIT IMPORTANT NOTICE Texas Instruments (TI) provides the enclosed product(s) under the following conditions: This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a finished end-product...
Page 25 - IMPORTANT NOTICE; Products
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers shouldobtain the l...
