Teledyne LXT-230 - Manual

Teledyne LXT-230

Teledyne LXT-230 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
Page: / 22

Table of Contents:

  • Page 2 – TABLE OF CONTENTS
  • Page 4 – Membrane Switches; adjustments are required for future buffer calibrations.; Back To Factory Calibration
  • Page 5 – can have either a positive or negative common.; Optional Software; Allows only authorized personnel entry to calibration modes.
  • Page 6 – or they can be powered by one power supply.
  • Page 7 – not; The; Display Menus and Screens; Contrast
  • Page 10 – SENTINEL DIAGNOSTICS; measurement standard; However, a dominant failure mechanism of an; Reference Half Cell; Diagnostic set up and configuration menus; pH
  • Page 11 – value, as set in by the user or TAI at time of shipment, may require; final pre-pHault alert
  • Page 12 – Replacement of the Microprocessor
  • Page 13 – Manual Output Mode; To release manual output:; Contrast Adjustment
  • Page 14 – IMPORTANT
  • Page 15 – Calibration Using a Grab Sample as a Standard; Procedure at the Standardization Menu:; Output Calibration
  • Page 16 – Temperature Calibration - Trim Adjustment; Procedure for trim adjust:
  • Page 19 – TROUBLESHOOTING GUIDE; Symptom
  • Page 21 – APPENDIX A - SPECIFICATIONS; MAXIMUM LOOP IMPEDANCE
Loading the manual






Model LXT-230 Transmitter

Installation and Operating Manual

for

pH and ORP



Teledyne Analytical Instruments

16830 Chestnut Street • City of Industry, CA 91748

888-789-8168 • [email protected] • www.teledyne-ai.com

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - TABLE OF CONTENTS

Model LXT-230 Instruction Manual / 2 TABLE OF CONTENTS UNPACKING THE INSTRUMENT .................................................................................... 4 1.0 GENERAL DESCRIPTION ........................................................................................ 4 1.1 Membrane Switc...

Page 4 - Membrane Switches; adjustments are required for future buffer calibrations.; Back To Factory Calibration

Model LXT-230 Instruction Manual / 4 UNPACKING THE INSTRUMENT Your Teledyne instrument has been carefully packaged to protect it from damage during shipment and dry storage. Upon receipt please follow the procedure outlined below. 1. Before unpacking, inspect the condition of the shipping container ...

Page 5 - can have either a positive or negative common.; Optional Software; Allows only authorized personnel entry to calibration modes.

Model LXT-230 Instruction Manual / 5 Fahrenheit. A toggle function in the Temperature Calibration Menu allows this selection to be performed in the field. 1.7 PID Output (Optional) An optional PID output is available and provides a 4-20 mA, three-mode control signal to a transducer or a final contro...

Other Teledyne Models

All Teledyne Other