Teledyne T802 - Manual

Teledyne T802

Teledyne T802 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
77 Page 77
78 Page 78
79 Page 79
80 Page 80
81 Page 81
82 Page 82
83 Page 83
84 Page 84
85 Page 85
86 Page 86
87 Page 87
88 Page 88
89 Page 89
90 Page 90
91 Page 91
92 Page 92
93 Page 93
94 Page 94
95 Page 95
96 Page 96
97 Page 97
98 Page 98
99 Page 99
100 Page 100
101 Page 101
102 Page 102
103 Page 103
104 Page 104
105 Page 105
106 Page 106
107 Page 107
108 Page 108
109 Page 109
110 Page 110
111 Page 111
112 Page 112
113 Page 113
114 Page 114
115 Page 115
116 Page 116
117 Page 117
118 Page 118
119 Page 119
120 Page 120
121 Page 121
122 Page 122
123 Page 123
124 Page 124
125 Page 125
126 Page 126
127 Page 127
128 Page 128
129 Page 129
130 Page 130
131 Page 131
132 Page 132
133 Page 133
134 Page 134
135 Page 135
136 Page 136
137 Page 137
138 Page 138
139 Page 139
140 Page 140
141 Page 141
142 Page 142
143 Page 143
144 Page 144
145 Page 145
146 Page 146
147 Page 147
148 Page 148
149 Page 149
150 Page 150
151 Page 151
152 Page 152
153 Page 153
154 Page 154
155 Page 155
156 Page 156
157 Page 157
158 Page 158
159 Page 159
160 Page 160
161 Page 161
162 Page 162
163 Page 163
164 Page 164
165 Page 165
166 Page 166
167 Page 167
168 Page 168
169 Page 169
170 Page 170
171 Page 171
172 Page 172
173 Page 173
174 Page 174
175 Page 175
176 Page 176
177 Page 177
178 Page 178
179 Page 179
180 Page 180
181 Page 181
182 Page 182
183 Page 183
184 Page 184
185 Page 185
186 Page 186
187 Page 187
188 Page 188
189 Page 189
190 Page 190
191 Page 191
192 Page 192
193 Page 193
194 Page 194
195 Page 195
196 Page 196
197 Page 197
198 Page 198
199 Page 199
200 Page 200
201 Page 201
202 Page 202
203 Page 203
204 Page 204
205 Page 205
206 Page 206
207 Page 207
208 Page 208
209 Page 209
210 Page 210
211 Page 211
212 Page 212
213 Page 213
214 Page 214
215 Page 215
216 Page 216
217 Page 217
218 Page 218
219 Page 219
220 Page 220
221 Page 221
222 Page 222
223 Page 223
224 Page 224
225 Page 225
226 Page 226
227 Page 227
228 Page 228
229 Page 229
230 Page 230
231 Page 231
232 Page 232
233 Page 233
234 Page 234
235 Page 235
236 Page 236
237 Page 237
238 Page 238
239 Page 239
240 Page 240
241 Page 241
242 Page 242
243 Page 243
244 Page 244
245 Page 245
246 Page 246
247 Page 247
248 Page 248
249 Page 249
250 Page 250
251 Page 251
252 Page 252
253 Page 253
254 Page 254
255 Page 255
256 Page 256
257 Page 257
258 Page 258
259 Page 259
260 Page 260
261 Page 261
262 Page 262
263 Page 263
264 Page 264
265 Page 265
266 Page 266
267 Page 267
268 Page 268
269 Page 269
270 Page 270
271 Page 271
272 Page 272
273 Page 273
274 Page 274
275 Page 275
276 Page 276
277 Page 277
278 Page 278
279 Page 279
280 Page 280
281 Page 281
282 Page 282
283 Page 283
284 Page 284
285 Page 285
286 Page 286
287 Page 287
288 Page 288
289 Page 289
290 Page 290
291 Page 291
292 Page 292
293 Page 293
294 Page 294
295 Page 295
296 Page 296
297 Page 297
298 Page 298
299 Page 299
300 Page 300
301 Page 301
302 Page 302
303 Page 303
304 Page 304
305 Page 305
306 Page 306
307 Page 307
308 Page 308
309 Page 309
310 Page 310
311 Page 311
312 Page 312
313 Page 313
314 Page 314
Page: / 314

Table of Contents:

  • Page 3 – or contact
  • Page 4 – Teledyne API T802 Paramagnetic O2 Analyzer Operation Manual; ii; This page intentionally left blank.
  • Page 5 – SAFETY MESSAGES
  • Page 6 – CONSIGNES DE SÉCURITÉ
  • Page 7 – WARRANTY; COVERAGE; Primer on Electro-Static
  • Page 9 – vii; ABOUT THIS MANUAL; Rev; ORGANIZATION; Part I
  • Page 10 – viii; Special Notices; ATTENTION; Note; REVISION; Date Rev; Administrative Updates and specs updates
  • Page 11 – ix; TABLE OF CONTENTS; SETUP MENU 69; RNGE
  • Page 13 – xi
  • Page 14 – xii; LIST OF FIGURES; T802 – Internal Gas Flow with CO
  • Page 15 – xiii; LIST OF TABLES
  • Page 16 – xiv; LIST OF APPENDICES
  • Page 19 – INTRODUCTION, FEATURES AND OPTIONS; ) in a sample gas drawn through the instrument. It uses a; FEATURES
  • Page 20 – HAZARD; OPTIONS; WEB SITE; Options for mounting the analyzer in standard 19” racks
  • Page 21 – Option; CAUTION - GENERAL SAFETY HAZARD
  • Page 23 – SPECIFICATIONS; PARAMETER SPECIFICATION
  • Page 24 – Analyzer Operation Manual; APPROVALS AND CERTIFICATIONS; SAFETY
  • Page 25 – GETTING STARTED; UNPACKING THE T802 ANALYZER; CAUTION; ENERAL; CAUTION – AVOID WARRANTY INVALIDATION; See
  • Page 27 – VENTILATION CLEARANCE; Ventilation Clearance; AREA; INSTRUMENT LAYOUT; FRONT PANEL; interface; Front Panel Layout
  • Page 28 – Display Screen and Touch Control
  • Page 29 – Table 3-2. Display Screen and Touch Control Description
  • Page 30 – Display/Touch Control Screen Mapped to Menu Charts
  • Page 31 – Rear Panel Layout
  • Page 33 – Internal Layout
  • Page 34 – CONNECTIONS AND SETUP; ELECTRICAL CONNECTIONS; High Voltages are present inside the analyzers case.
  • Page 35 – Analog In Connector; PIN DESCRIPTION; ANALOG OUTPUT CONNECTIONS
  • Page 36 – buttons of the unit’s; Analog Output Connector; PIN; CURRENT LOOP ANALOG OUTPUTS (OPTION 41) SETUP
  • Page 37 – Current Loop Option Installed
  • Page 38 – CONNECTING THE STATUS OUTPUTS
  • Page 39 – STATUS; Status Output Connector; HOLD OFF; CONNECTING THE CONTROL INPUTS; on the analyzer’s rear panel.
  • Page 40 – Control Input Connector; VDC output
  • Page 41 – Concentration Alarm Relay
  • Page 42 – Alarm 1 will both be associated with the; CO; CONNECTING THE COMMUNICATION INTERFACES; USB; For; DTE; communication equipment (; DCE
  • Page 43 – MPORTANT; Data Bits: 8 data bits with 1 stop bit; Default Pin Assignments, Rear Panel COM Port Connectors
  • Page 44 – RS-232 MULTIDROP OPTION CONNECTION
  • Page 45 – NO power; all
  • Page 46 – Jumper and Cables for Multidrop Mode
  • Page 47 – Analyzer; Ensure jumper is; Analyzer Interconnect Diagram; ID is typically the model number or “0”.
  • Page 48 – PNEUMATIC CONNECTIONS; While O; CALIBRATION GASES; Rapid release of pure N; SPAN GAS
  • Page 49 – Table 3-8: NISTSRMs Available for Traceability of O; INTERFERENTS; mixed in N; BASIC PNEUMATIC CONNECTIONS
  • Page 50 – SAMPLE GAS SOURCE
  • Page 51 – CALIBRATION GAS SOURCES; The source of calibration gas is also attached to the; SAMPLE; when a calibration operation is actually being performed.; INPUT GAS VENTING
  • Page 52 – T802 Internal Gas Flow (Basic Configuration)
  • Page 54 – CALIBRATION; STARTUP
  • Page 55 – WARNING MESSAGES; To view and clear warning messages, press:; Viewing and Clearing T802 WARNING Messages
  • Page 56 – Warning Messages; MEANING; FUNCTIONAL CHECKS
  • Page 57 – INITIAL CALIBRATION; Final Test and; DUAL; LOW
  • Page 59 – REPORTING RANGE SETTINGS
  • Page 60 – EXIT
  • Page 61 – SET O; Set the expected O
  • Page 62 – ZERO/SPAN CALIBRATION; The CO
  • Page 63 – SECTION II
  • Page 65 – BASIC OPERATION; measurement features and functional; OVERVIEW OF OPERATING MODES; Sample Mode; The next most commonly used operating mode is; mode, which is used
  • Page 66 – Front Panel Touchscreen and Display; and; , other modes the analyzer can be operated; MODE EXPLANATION
  • Page 67 – SAMPLE MODE; Viewing Test Functions
  • Page 68 – Only appears when the optional CO; CALIBRATION MODE
  • Page 69 – SETUP MODE; PRIMARY SETUP MENU
  • Page 70 – Table 6-5: Secondary Setup Mode Features and Functions
  • Page 71 – SETUP MENU; Pressing the; CFG; key displays the instrument’s configuration information. This; T802 analyzer when contacting Technical Support.; To access the configuration table, press:
  • Page 72 – PHYSICAL RANGE VERSUS ANALOG OUTPUT REPORTING; concentration, the full scale of expected values is only 21% of the
  • Page 73 – ANALOG OUTPUT RANGES FOR O; Analog Output Connector Pin Out; values
  • Page 74 – REPORTING RANGE; The T802 provides three analog output range modes to choose from.; Single range (SNGL) mode sets a single maximum range for the analog; To select the Analog Output Range Type press:
  • Page 75 – When the single range mode is selected (; concentration; SNGL; range mode and to set the upper limit of the range, press:
  • Page 79 – To set up and use the dilution ratio option:
  • Page 80 – IS NOT
  • Page 81 – Password Levels
  • Page 82 – password enables the; mode; Analyzer enters selected menu
  • Page 83 – SETTING THE INTERNAL CLOCK’S TIME AND DAY
  • Page 84 – ADJUSTING THE INTERNAL CLOCK’S SPEED; to speed up or slow down the clock by a fixed; VARS
  • Page 85 – ID
  • Page 86 – To edit the instrument’s ID code, press:
  • Page 89 – To access and navigate the
  • Page 90 – A series of diagnostic tools is grouped together under the; menu. These tools can be used in a variety of; DIAG; analog output channel.
  • Page 91 – To access the; functions press the following menu sequence:; returns to the; SECONDARY SETUP; Activates the; submenu
  • Page 92 – Access the Signal I/O test mode from the DIAG Menu and press; to access
  • Page 93 – ANALOG OUTPUT; The T802 analyzer comes equipped with four analog outputs.; ANALOG I/O CONFIGURATION
  • Page 95 – ANALOG OUTPUT VOLTAGE / CURRENT RANGE SELECTION; RANGE NAME; CURR; To change the output type and range, select the; CONFIGURATION
  • Page 96 – CALIBRATION OF THE ANALOG OUTPUTS
  • Page 97 – ENABLING OR DISABLING THE AUTOCAL FOR AN INDIVIDUAL ANALOG; To enable or disable the; AutoCal; feature for an individual analog output, elect
  • Page 98 – AUTOMATIC GROUP CALIBRATION OF THE ANALOG OUTPUTS; To calibrate the outputs as a group with the; AOUTS; command, select the
  • Page 99 – AUTOMATIC INDIVIDUAL CALIBRATION OF THE ANALOG OUTPUTS; To use the; AUTO CAL; feature to initiate an automatic calibration for an
  • Page 100 – MANUAL CALIBRATION OF THE ANALOG OUTPUTS CONFIGURED FOR
  • Page 102 – MANUAL ADJUSTMENT OF CURRENT LOOP OPTION OUTPUT SPAN AND; A current loop option may be purchased for the; set above 1 mA also have a –5 under range.; from the list of options on the “Output Range”
  • Page 103 – % resistor across the current loop output in lieu of the
  • Page 104 – Alternative Setup Using 250; Voltage across
  • Page 105 – TURNING AN ANALOG OUTPUT OVER-RANGE FEATURE; To turn the over-range feature on or off, select the
  • Page 106 – ADDING A RECORDER OFFSET TO AN ANALOG OUTPUT; To add a zero offset to a specific analog output channel, select the
  • Page 107 – SELECTING A TEST CHANNEL FUNCTION FOR OUTPUT A4; TEST CHANNEL; SAMPLE PRESSURE
  • Page 109 – AIN CALIBRATION; To perform an analog input calibration, select the
  • Page 110 – ANALOG INPUTS (XIN1...XIN8) OPTION CONFIGURATION; To adjust settings for the Analog Inputs option parameters press:
  • Page 111 – The T802 includes two O
  • Page 112 – SETTING THE T802 OPTION 61 CONCENTRATION ALARM; To enable either of the O
  • Page 115 – COMMUNICATIONS SETUP AND OPERATION; DATA TERMINAL/COMMUNICATION EQUIPMENT; DTE devices receive data on Pin 2 and transmit data on Pin 3.; COMMUNICATION MODES, BAUD RATE AND PORT; on
  • Page 116 – COM PORT COMMUNICATION MODES; MODE; of
  • Page 117 – HESSEN
  • Page 118 – COM PORT BAUD RATE
  • Page 119 – COM PORT TESTING; COM; To initiate the test press the following menu sequence.
  • Page 120 – REMOTE ACCESS VIA THE ETHERNET; Ethernet Status Indicators; LED FUNCTION; CONFIGURING THE ETHERNET INTERFACE USING DHCP
  • Page 123 – MANUALLY CONFIGURING THE NETWORK IP ADDRESSES; your LAN is not running a DHCP software package
  • Page 125 – CHANGING THE ANALYZER’S HOSTNAME; The; HOSTNAME; is the name by which the analyzer appears on your network.; The default name for all Teledyne API T802 analyzers is
  • Page 126 – USB PORT FOR REMOTE ACCESS; Direct Cable Connection
  • Page 128 – COMMUNICATIONS PROTOCOLS; This section presents MODBUS and HESSEN information.; MODBUS SETUP; Minimum Requirements
  • Page 130 – Manual Addendum for Hessen; from the Teledyne API web site:; HESSEN COM PORT CONFIGURATION; RS-232 Communication Parameters for Hessen Protocol; PARAMETER STANDARD HESSEN
  • Page 131 – ACTIVATING HESSEN PROTOCOL
  • Page 132 – SELECTING A HESSEN PROTOCOL TYPE; Manual Addendum for Hessen Protocol
  • Page 133 – SETTING THE HESSEN PROTOCOL RESPONSE MODE; To Select a Hessen response mode, press:
  • Page 134 – GAS LIST ENTRY FORMAT AND DEFINITIONS; GAS TYPE
  • Page 135 – EDITING OR ADDING HESSEN GAS LIST ENTRIES; To add or edit an entry to the Hessen Gas List, press:
  • Page 136 – DELETING HESSEN GAS LIST ENTRIES; To delete an entry from the Hessen Gas list, press:
  • Page 137 – SETTING HESSEN PROTOCOL STATUS FLAGS
  • Page 138 – To assign or reset the status flag bit assignments, press:; INSTRUMENT ID; code for the T802 analyzers is either “
  • Page 140 – Table 7-1: Front Panel LED Status Indicators for DAS
  • Page 141 – DAS STRUCTURE; PARAMETER; TRIGGER; events that describe an individual; DATA CHANNEL; . Each data channel; DAS CHANNELS; One triggering event is selected
  • Page 142 – DEFAULT DAS CHANNELS; CONC
  • Page 143 – the analyzer’s optical sensors. For each parameter:; A value is logged once every minute; Almost identical to; DETAIL; except that for each parameter:; The last 360 readings for each parameter are recorded/reported.
  • Page 144 – Default DAS Channel Setup
  • Page 145 – PREV; Button; DAS VIEW – Menu Button Functions
  • Page 146 – Translates to the following configuration:
  • Page 147 – EDITING DAS DATA CHANNEL NAMES; EDIT CHANNEL MENU; EDIT; EDITING DAS TRIGGERING EVENTS
  • Page 148 – WARNINGS; : Some data may be useful when stored if one of several warning
  • Page 149 – SLOPE; FUNCTION EFFECT; PRECISION; SAMPLES
  • Page 152 – To define the; SAMPLE PERIOD; REPORT PERIOD; intervals are synchronized to
  • Page 153 – REPORT PERIODS IN PROGRESS WHEN INSTRUMENT IS POWERED OFF
  • Page 154 – To set the; NUMBER OF RECORDS; , follow the instruction shown in Section
  • Page 155 – RS-232 REPORT FUNCTION; To enable automatic; port reporting, follow the instruction shown in
  • Page 156 – ENABLING / DISABLING THE HOLD OFF FEATURE
  • Page 157 – THE COMPACT REPORT FEATURE
  • Page 158 – DISABLING/ENABLING DATA CHANNELS
  • Page 159 – REMOTE DAS CONFIGURATION; DAS CONFIGURATION VIA APICOM; APICOM Remote Control Program Interface
  • Page 160 – APICOM; Avoid losing data and saved configurations:; All data, parameters and
  • Page 161 – DAS CONFIGURATION VIA TERMINAL EMULATION PROGRAMS; DAS Configuration through a Terminal Emulation Program
  • Page 162 – REMOTE OPERATION; Computer mode; or; Interactive mode; COMPUTER MODE; REMOTE CONTROL VIA APICOM; connection via RS-232 modem or Ethernet.
  • Page 163 – INTERACTIVE MODE; REMOTE CONTROL VIA A TERMINAL EMULATION PROGRAM; HELP COMMANDS IN INTERACTIVE MODE; Table 8-1: Terminal Mode Software Commands; COMMAND Function; ESC; COMMAND SYNTAX; All Commands follow the syntax:
  • Page 164 – Teledyne API Serial I/O Command Types; COMMAND COMMAND; DATA TYPES; : Used to indicate integral quantities such as a number of records, a; Hexadecimal integer data; : Used for the same purposes as integers.; Floating-point number; : Used to specify continuously variable values such as; Boolean expressions; : Used to specify the value of variables or I/O signals that
  • Page 165 – Text strings; : Used to represent data that cannot be easily represented by other; STATUS REPORTING
  • Page 166 – REMOTE ACCESS BY MODEM; Once the cable has been connected, check to make sure:; The DTE-DCE switch on the rear panel is in the DCE position.; To change this setting press:
  • Page 167 – To initialize the modem press:; “MODEM NOT INITIALIZED”
  • Page 168 – COM PORT PASSWORD SECURITY; LOGON
  • Page 171 – CALIBRATION PROCEDURES; adjusting the analyzers internal flow sensor
  • Page 172 – BEFORE CALIBRATION; REQUIRED EQUIPMENT, SUPPLIES, AND EXPENDABLES; electroless nickel.; ZERO AIR; gas
  • Page 173 – Cylinders of calibrated O; Nominal; DATA RECORDING DEVICES
  • Page 174 – MANUAL CALIBRATION CHECKS AND CALIBRATION; NEVER press the ENTR button if you are only; checking; SETUP FOR BASIC CALIBRATION CHECKS AND CALIBRATION; Connect the Sources of Zero Air and Span Gas as shown below.
  • Page 175 – PERFORMING A BASIC MANUAL CALIBRATION CHECK
  • Page 176 – PERFORMING A BASIC MANUAL CALIBRATION
  • Page 177 – ZERO/SPAN POINT CALIBRATION PROCEDURE
  • Page 178 – ASSESSING CALIBRATION QUALITY; OFFSET; Final Test and Checkout Sheet; CALDAT; checks) and a lifetime history of monthly calibrations.; If your instrument has a CO; CALIBRATION OF THE T802’S ELECTRONIC; PRESSURE CALIBRATION
  • Page 179 – To cause the analyzer to measure and record a value for PRES, press.
  • Page 180 – FLOW CALIBRATION
  • Page 181 – CALIBRATION OF THE OPTIONAL CO; SET CO
  • Page 182 – ACTIVATE CO; To change the stability test function from O; Press; NOTE
  • Page 183 – To perform the zero/span calibration procedure:
  • Page 187 – MAINTENANCE SCHEDULE & PROCEDURES; MAINTENANCE SCHEDULE; OXYGEN IS A STRONG OXIDIZER.
  • Page 190 – O2 ZERO CAL
  • Page 191 – PREDICTIVE DIAGNOSTICS; Table 10-3: Predictive uses for Test Functions; STABIL; MAINTENANCE PROCEDURES; REPLACING THE SAMPLE PARTICULATE FILTER
  • Page 192 – To change the filter:; the filter assembly.; Sample Particulate Filter Assembly; in the bottom of the holder.; REBUILDING THE SAMPLE PUMP
  • Page 193 – PERFORMING LEAK CHECKS; VACUUM LEAK CHECK AND PUMP CHECK; PRESSURE LEAK CHECK
  • Page 194 – PERFORMING A SAMPLE FLOW CHECK; Sample flow should be 120 cm
  • Page 195 – CLEANING THE OPTICAL BENCH
  • Page 197 – TROUBLESHOOTING AND SERVICE; Use common sense when operating inside a running analyzer.; GENERAL TROUBLESHOOTING; The T802 paramagnetic O
  • Page 198 – FAULT DIAGNOSIS WITH WARNING MESSAGES; button displays if there
  • Page 200 – To view or clear the various warning messages press:; Viewing and Clearing Warning Messages
  • Page 201 – FAULT DIAGNOSIS WITH TEST FUNCTIONS
  • Page 202 – TEST FUNCTIONS; critical inputs and outputs.
  • Page 203 – Example of Signal I/O Function
  • Page 204 – USING THE INTERNAL ELECTRONIC STATUS LEDS; C bus and relay board are functioning properly.; CPU STATUS INDICATOR; RELAY PCA STATUS INDICATORS; C BUS WATCHDOG STATUS LEDS; The most important is D1 (which indicates the health of the I
  • Page 205 – RELAY PCA STATUS LED S; Watchdog Indicator; GAS FLOW PROBLEMS
  • Page 206 – In general, flow problems can be divided into three categories:; Flow is too high; T802 INTERNAL GAS FLOW DIAGRAMS; T802– Basic Internal Gas Flow
  • Page 207 – TYPICAL SAMPLE GAS FLOW PROBLEMS; FLOW IS ZERO
  • Page 209 – ACTUAL FLOW DOES NOT MATCH DISPLAYED FLOW; /min, adjust the calibration of the flow measurement as; SAMPLE PUMP; /min there is a leak in the pneumatic lines.; CALIBRATION PROBLEMS; MISCALIBRATED
  • Page 210 – INABILITY TO SPAN – NO SPAN BUTTON; the same amount of zero air from two different sources. If the O; OTHER PERFORMANCE PROBLEMS; TEMPERATURE PROBLEMS; BOX TEMPERATURE; signal using; parameter will vary with ambient temperature, but at ~30
  • Page 211 – SUBSYSTEM CHECKOUT; AC MAINS CONFIGURATION; is present at the line input on the rear panel.; DC POWER SUPPLY; DC Power Test Point and Wiring Color Codes
  • Page 212 – Table 11-6: DC Power Supply Acceptable Levels; C BUS; Operation of the I; TOUCHSCREEN INTERFACE
  • Page 213 – The paramagnetic O; PRESSURE/FLOW SENSOR ASSEMBLY
  • Page 214 – MOTHERBOARD; menu to check the; Choose a parameter in the Signal I/O function such as; ANALOG OUTPUTS: CURRENT LOOP; OUTPUT RANGE
  • Page 215 – STATUS OUTPUTS; The procedure below can be used to test the Status outputs:; Status Outputs Check; CPU
  • Page 216 – RS-232 COMMUNICATIONS; GENERAL RS-232 TROUBLESHOOTING
  • Page 217 – There are Two LEDs located on the CO; REPAIR PROCEDURES; REPAIRING SAMPLE FLOW CONTROL ASSEMBLY
  • Page 218 – Critical Flow Restrictor Assembly / Disassembly
  • Page 219 – FAQ’S
  • Page 220 – QUESTION ANSWER; TECHNICAL ASSISTANCE
  • Page 221 – PRINCIPLES OF OPERATION; PARAMAGNETIC OXYGEN MEASUREMENT; MAGNETIC PROPERTIES OF O; inside the spheres has a small
  • Page 222 – Paramagnetic O
  • Page 223 – NDIR MEASUREMENT OF CO
  • Page 224 – OPERATION WITHIN THE T802 ANALYZER; Operationally, the CO; PNEUMATIC OPERATION
  • Page 225 – T802 – Internal Pneumatic Flow – Basic Configuration; PNEUMATIC OPERATION OF THE CO; Pneumatically, the CO
  • Page 226 – T802 – Internal Pneumatic Flow with CO; FLOW RATE CONTROL; A critical flow orifice.; CRITICAL FLOW ORIFICE
  • Page 227 – Flow Control Assembly & Critical Flow Orifice; PARTICULATE FILTER; SAMPLE PRESSURE SENSOR
  • Page 228 – SAMPLE FLOW SENSOR; ELECTRONIC OPERATION; OVERVIEW; in the sample gas. This; Via an optional Ethernet communications card:
  • Page 229 – of key electromechanical devices such as heaters..; T802 Electronic Block Diagram; ELECTRONIC OPERATION OF THE CO
  • Page 231 – CPU Card; RELAY BOARD; C bus, interprets these digital
  • Page 232 – LECTRICAL
  • Page 233 – Figure 12-11: Relay PCA with AC Relay Retainer in Place; STATUS LEDS; LED Color
  • Page 234 – Figure 12-12: Status LED Locations – Relay PCA; WATCHDOG CIRCUITRY; HEATER CONTROL; TEMPERATURE CONTROL; A TO D CONVERSION
  • Page 235 – SENSOR INPUTS; sample chamber housing, which reports the; ANALOG OUTPUTS; The analyzer comes equipped with four analog outputs:
  • Page 236 – EXTERNAL DIGITAL I/O; C DATA BUS; C. The data is then fed to the; POWER UP CIRCUIT; C circuitry to specific values until the; POWER SUPPLY / CIRCUIT BREAKER; AC power is distributed directly to the sample gas pump.
  • Page 237 – RELAY PCA; Figure 12-13: Power Distribution Block Diagram; FRONT PANEL TOUCH SCREEN/DISPLAY INTERFACE
  • Page 238 – Figure 12-14: Front Panel and Display Interface Block Diagram; LVDS TRANSMITTER BOARD
  • Page 239 – SOFTWARE OPERATION; ADAPTIVE FILTER; The T802 software processes the O
  • Page 240 – CALIBRATION - SLOPE AND OFFSET
  • Page 241 – A PRIMER ON ELECTRO-STATIC DISCHARGE; HOW STATIC CHARGES ARE CREATED; Triboelectric Charging; pellets during
  • Page 242 – Static Generation Voltages for Typical Activities; MEANS OF GENERATION; HOW ELECTRO-STATIC CHARGES CAUSE DAMAGE; Semiconductor Reliability; DAMAGE SUSCEPTIBILITY VOLTAGE; Potentially damaging electro-static discharges can occur:
  • Page 243 – COMMON MYTHS ABOUT ESD DAMAGE; I didn’t feel a shock so there was no electro-static
  • Page 244 – BASIC PRINCIPLES OF STATIC CONTROL; GENERAL RULES; Basic Anti-ESD Workbench
  • Page 245 – Simply touching a grounded piece of metal is insufficient
  • Page 246 – WORKING AT THE INSTRUMENT RACK
  • Page 247 – Always unpack shipments from Teledyne API Technical Support by:
  • Page 248 – CAUTION – ESD HAZARD; DO NOT; component/assembly directly. This includes
  • Page 249 – GLOSSARY; Term Description/Definition
  • Page 253 – Appendix A; APPENDIX A – Version Specific Software Documentation
  • Page 255 – ACAL; Figure A-1: Basic Sample Display Menu
  • Page 256 – Go to; iDAS; Menu Tree
  • Page 259 – HESSEN PROTOCOL
  • Page 261 – Low Access Level Setup Variables (818 password); Medium Access Level Setup Variables (929 password)
  • Page 269 – Name; Warnings
  • Page 270 – Test Measurements
  • Page 272 – Signal Name
  • Page 273 – Front panel I
  • Page 274 – Rear board primary MUX analog inputs
  • Page 275 – External analog input board, default I
  • Page 279 – Table A-7: Terminal Command Designators; COMMAND
  • Page 281 – MODBUS Register
  • Page 285 – APPENDIX B - Spare Parts
  • Page 287 – PARTNUMBER
  • Page 291 – PARAMETER RECORDED
  • Page 292 – problem that you are encountering.
  • Page 293 – APPENDIX D – Wire List and Electronic Schematics
  • Page 297 – TELEDYNE; All part numbers in
  • Page 307 – GUI Interface; Make; FEMA
  • Page 308 – Backlight Brightness Control
  • Page 309 – Configuration Select; Mode
  • Page 310 – TOUCH SCREEN INTERFACE CIRCUITRY ( TBD)
  • Page 311 – LVDS, Transmitter Board; From ICOP CPU
  • Page 312 – PRINTED DOCUMENTS ARE UNCONTROLLED
Loading the manual

OPERATION MANUAL

MODEL T802

PARAMAGNETIC OXYGEN ANALYZER

© TELEDYNE ADVANCED POLLUTION INSTRUMENTATION

9480 CARROLL PARK DRIVE

SAN DIEGO, CA 92121-5201

USA

Toll-free Phone: 800-324-5190

Phone: 858-657-9800

Fax: 858-657-9816

Email: [email protected]

Website: http://www.teledyne-api.com/


Copyright 2010-2013

07275B DCN6418

Teledyne Advanced Pollution Instrumentation

14 January 2013

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - or contact

i A BOUT T ELEDYNE A DVANCED P OLLUTION I NSTRUMENTATION (TAPI) Teledyne Advanced Pollution Instrumentation, Inc. (TAPI) is a worldwide market leader in the design and manufacture of precision analytical instrumentation used for air quality monitoring, continuous emissions monitoring, and specialty ...

Page 4 - Teledyne API T802 Paramagnetic O2 Analyzer Operation Manual; ii; This page intentionally left blank.

Teledyne API T802 Paramagnetic O2 Analyzer Operation Manual ii This page intentionally left blank. 07275B DCN6418

Page 5 - SAFETY MESSAGES

iii SAFETY MESSAGES Important safety messages are provided throughout this manual for the purpose of avoiding personal injury or instrument damage. Please read these messages carefully. Each safety message is associated with a safety alert symbol, and are placed throughout this manual; the safety sy...

Other Teledyne Models

All Teledyne Other