Teledyne GFC7000EU - Manual
Teledyne GFC7000EU – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MODEL GFC7000EU CO ANALYZER WITH AUTO-REFERENCE; OVERVIEW; Specifications; Table: Model GFC7000EU Specifications; Ranges
- Page 3 – Relay alarm outputs
- Page 4 – MSG; CLR SETUP
- Page 5 – Figure: Viewing and Clearing Warning Messages; Table: Warning Messages
- Page 6 – Warning
- Page 7 – APPENDIX B – GFC7000EU Spare Parts List; NOTE
MODEL GFC7000EU CO ANALYZER WITH AUTO-REFERENCE
(Addendum to GFC7000E Manual PN 04584)
05134 Rev -
1
MODEL GFC7000EU
C O
2
ANALYZER
(Addendum to GFC7000E Manual PN 04584)
Teledyne Analytical Instruments
16830 Chestnut St.
City of Industry, Ca. 91748
TEL: 626-961-9221
FAX: 626-961-2538
TEL: 626-934-1500
E-MAIL: [email protected]
WEB SITE: http://www.teledyne-ai.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
MODEL GFC7000EU CO ANALYZER WITH AUTO-REFERENCE (Addendum to GFC7000E Manual PN 04584) 05134 Rev - 2 OVERVIEW The model GFC7000EU is a close derivative of the Model GFC7000E CO Analyzer.The optical bench is longer (14 m), making the instrument more sensitive at low CO 2 levels. The instrument has a ...
MODEL GFC7000EU CO ANALYZER WITH AUTO-REFERENCE (Addendum to GFC7000E Manual PN 04584) 05134 Rev - 3 Humidity Range 0-95% RH, Non-Condensing Temp Coefficient < 0.05 % of reading per ° C (5 ppb/ ° C minimum) (6) Voltage Coefficient < 0.05 % of reading per V Dimensions(HxWxD) 7" x 17" x ...
MODEL GFC7000EU CO ANALYZER WITH AUTO-REFERENCE (Addendum to GFC7000E Manual PN 04584) 05134 Rev - 4 There are 4 relay alarm outputs (AL1-AL4) on the rear panel. AL1 is for systemokay, AL2 is for concentration limit 1 exceeded and AL3 is for concentration limit 2exceeded. The relay alarm output AL1 ...
