Targus DEFCON 3 - Manual
Targus DEFCON 3 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INTRODUCTION; Figure 1. Front and Back View of DEFCON 3 Alarm Unit; Contents; DEFCON 3 alarm unit; DEFCON 3 AT A GLANCE
- Page 3 – Features; Level 1; ACTIVATING THE ALARM UNIT
- Page 6 – Installing Batteries; Figure 3. Installing Batteries in the Alarm Unit; Press and hold
- Page 7 – Programming a New Remote Control; Arming and Disarming; press and hold
- Page 8 – Navigating Program Mode
- Page 9 – Setting Motion Sensitivity; Note: The alarm siren will sound under the following conditions:
- Page 11 – Exiting Program Mode; the Program button for three seconds. A special tone; Alarm Unit Low Battery Warning; any button on the remote control; either button on
- Page 12 – SPECIFICATIONS; Alarm Characteristics:; CERTIFICATIONS; the following two conditions:
- Page 13 – TROUBLESHOOTING; Problem
- Page 14 – Warranty registration at:
- Page 15 – The Leading Global Supplier of Portable Solutions
Portable Security System
User’s Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
INTRODUCTION Congratulations on your purchase of the Targus DEFCON 3 SecuritySystem - you have selected the most advanced personal property protectionavailable. Now your briefcase, computer, and other personal property areas safe on the road as they are in your home or office! This user’s guide prov...
Features Electronic Motion Sensor Triggers the alarm when motion isdetected. You can choose from twodifferent sensitivity settings. Level 1 - Low Motion Sensitivity (default) Level 2 - High Motion Sensitivity Alarm Volume 84dB - Low Volume 94dB - High Volume (default) Alarm Siren Choice of six diffe...
5 Installing Batteries Figure 3. Installing Batteries in the Alarm Unit 1. Unscrew the end of the cable to detach it. 2. Remove the screw and battery cover from the back of the alarm unit. 3. Insert the batteries in place as shown in Figure 3. 4. Replace the battery cover and screw. 5. Reattach the ...