Spirit xt9 - Manual

XT9 4 WARNING! NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power cord away from any moving part of the treadmill including the elevationmechanism and transport wheels. NEVER remove any cover without first disconnecting AC power. If voltage varies by t...

XT9 5 NEVER operate this treadmill without reading and completely understanding the results of any operational change you request from the computer. Understand that changes in speed and incline do not occur immediately. Set your desired speed on the computer console and release the adjustment key. T...

XT9 6 ASSEMBLY PACK CHECK LIST (4 pcs) 5/16 x 19 x 1.5T Curved Washer(4 pcs) M5 x 15 m/m Phillips Head Screw(14 pcs) 5/16 x15m/m Button Head Socket Screw (1pc) Safety Key (1 pc) Deck / Belt Lubricant (1 pc) Combination M5 Allen Wrench & Phillips Head Screwdriver (1pc) M6 Allen Wrench Assembly ST...

XT9 8 Do not attempt to move the unit unless it is in the folded and locked position. Be s ure the powercord is s ecured to avoid possible damage. Use both handrails to maneuver the unit to the desiredposition. To Fold The Treadmill: Make certain the treadmill is at minimum incline . Lift the treadm...

XT9 9 Getting familiar with the control panel XT9 Console Getting started: Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the powerswitch located at the front of the treadmill below the motor hood. Ensure that the safety key isinstalled, as the treadmill will not...

XT9 11 Dot Matrix Center Display (Program Operation): Twenty rows of dots (8 high) indicate each segment of a workout. The dots are only to show an approximate level (speed/incline) of effort. They do not necessarily indicate a specific v alue -only an approximate percent to compare levels of intens...

XT9 12 Factory preset programs (P1~P5), 2 user defined programs, and one Manual program.Each preset program has a maximum speed level that is displayed when a desired workout ischosen. The maximum speed that the particular program will achieve will be displayed in theSpeed window.Also included are t...

XT9 13 STEP 5: The first column (segment) will now be blinking. Using the Fast / Slow or rapid keys, adjust the speed level to your desired effort for the first segment then press enter. The secondcolumn will now be blinking. Repeat the above process until all segments have beenprogrammed. The first...

XT9 14 Belt and Bed - Your treadmill uses a very high-efficient low-friction bed. Performance is maximized when the bed is kept as clean as possible. Use a soft, damp cloth or paper towel towipe the edge of the belt and the area between the belt edge and frame. Also reach as far aspractical directly...

XT9 15 TREADBELT TRACKING ADJUSTMENT: The performance of your treadmill is dependent on the frame running on a reasonably levelsurface. If the frame is not level, the front and back roller cannot run parallel, and constant beltadjustment may be necessary.The treadmill is designed to keep the treadbe...

XT9 17 Before contacting your dealer for aid, please review the following information. It may save youboth time and expense. This list includes common problems that may not be covered underthe treadmill s warranty. PROBLEM SOLUTION/CAUSE Display does not light Tether cord not in position. Circuit br...

XT9 18 Effective October 15, 2006 TREADMILL WARRANTY Spirit M anufacturing Inc. warrants all its home us e treadmills parts for a period of 5 years fr om th e date of retail sale, as determined by sale receipt,or in the absence of a receipt eighteen (18) months from the original factory shipping dat...