Spirit XT800 - Manual - manualsarea.com

Page 2 - Table of Contents; THIS TREADMILL IS INTENDED FOR

XT200. / XT 600 / XT 800 1 Product Registration…………………………………………………………………………. 2 Important Safety Instructions………………………………………………………………… 3 Important Electrical Information………………………………………………………………4 Important Operation Instructions……………………………………………………………..5 Assembly instructions……………………………………………………………………...

Page 3 - Serial Number; CONGRATULATIONS ON YOUR; Product Registration

XT200. / XT 600 / XT 800 2 Thank you for your purchase of this quality treadmill from Spirit Manufacturing, Inc. Your new treadmill was manufactured by one of the leading fitness manufacturers in the world and is backed by one of the most comprehensive warranties available. Through your dealer, Spir...

Page 4 - - Read all instructions before using this appliance.; from the electrical outlet prior to cleaning and/or service work.; Important Safety Instructions

XT200. / XT 600 / XT 800 3 WARNING - Read all instructions before using this appliance. DANGER - To reduce the risk of electric shock disconnect your Spirit treadmill from the electrical outlet prior to cleaning and/or service work. WARNING - To reduce the risk of burns, fire, electric shock, or inj...

Page 6 - NEVER; NEVER; Safety Tether Cord

XT200. / XT 600 / XT 800 5 ● NEVER operate this treadmill without reading and completely understanding the results of any operational change you request from the computer. ● Understand that changes in speed and incline do not occur immediately. Set your desired speed on the computer console and rele...

Page 9 - STEP 1; Be; Do not tighten these screws until

XT200. / XT 600 / XT 800 8 ASSEMBLY PACK CHECK LIST (XT200 /XT600) (8 pcs) 5/16" x 15m/m Button Head Socket Screw (4 pcs) 5/16" x 2" Button Head Socket Screw (4 pcs) 8 x 23 x 1.5T Curve Washer (2 pcs) 5/16" x 2-3/4" Button Head Socket Screw (2 pcs) 5/16" x 1-1/2" Button H...

Page 10 - STEP 2; NOTE: The L&R handle bars are different. The Right handle bar has; STEP 4

XT200. / XT 600 / XT 800 9 STEP 2 1. Mount the L&R Handle bars onto Handle bar mounting plates at the top of the upright tubes with 4pcs of 5/16” x 2” Button Head Socket Screw and 4pcs of curved washer. NOTE: The L&R handle bars are different. The Right handle bar has two wires and the switc...

Page 12 - Be careful not to pinch the

XT200. / XT 600 / XT 800 11 ASSEMBLY PACK CHECK LIST (XT800) (2 pcs) 3/8" x 2" Button Head Socket Screw (10 pcs) 5/16" x 15m/m Button Head Socket Screw (2 pcs) 3/8" x 2T Spring Washer (4 pcs) 5/16" x 2" Button Head Socket Screw (2 pcs) 5/16" x 2-3/4" Hex Head Screw (2...

Page 13 - inside; STEP 3

XT200. / XT 600 / XT 800 12 STEP 2 1. Install the L & R inside console end caps onto the ends of the 1-1/4” X 2-3/8” console mounting tube. Ensure the end caps are oriented correctly and facing the correct direction (see diagram). Also ensure that the wiring is fed through the end caps. 2. Place...

Page 14 - To Fold The Treadmill:; Make certain the treadmill is at minimum incline; To Unfold The Treadmill:; Transport

XT200. / XT 600 / XT 800 13 Do not attempt to move the unit unless it is in the folded and locked position. Be sure the power cord is secured to avoid possible damage. Use both handrails to maneuver the unit to the desired position. ■ To Fold The Treadmill: Make certain the treadmill is at minimum i...

Spirit XT800 - Manual

Table of Contents:

Summary

Other Spirit Models