Spalding M867SF12 - Manual
Spalding M867SF12 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING; SAFETY INSTRUCTIONS; REQUIRED TOOLS AND MATERIALS:
- Page 3 – PARTS LIST
- Page 6 – SIDE VIEW; WAIT A MINIMUM OF 72 HOURS BEFORE GOING ON
- Page 9 – THIRD; TWO; Completed Assembly
- Page 10 – YOKE PLACEMENT; FIGURE
- Page 12 – Rim Assembly; DO NOT; cut and peel protective film
- Page 17 – What is Not Covered By This Warranty; RIM; LIMITED LIFETIME WARRANTY
1
08/06
ID# M867SF12
In-Ground Basketball System
Owners Manual
Customer Service Center
• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.
Toll-Free Customer Service Number for U.S:
1-800-334-9111
Internet Address: http://www.spalding.com
Write Model Number
From Box Here:
WARNING!
READ AND UNDERSTAND
OPERATOR'S MANUAL
BEFORE USING THIS UNIT.
FAILURE TO FOLLOW
OPERATING INSTRUCTIONS
COULD RESULT IN INJURY
OR DAMAGE TO PROPERTY.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 ID# M867SF12 08/06 IMPORTANT! WRITE MODEL NUMBER FROM BOX ONTO PAGE 1 OF THIS OWNERS MANUAL Owner must ensure that all players know and follow these rules for safe operation of the system. WARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net. • Duri...
Item Qty. Part No. Description 1 1 858861 Pole 2 1 898850 Plate, Anchor, Black 3 1 Rim Assembly 4 1 Net 5 4 203017 Nut, Hex, 3/8-16 6 4 203300 Washer, Locking, 3/8 7 4 200512 Bolt, Hex, Tap, 3/8-16 x 3.5” Long 8 1 204923 Pin, Cotter, #8 9 1 204921 Washer, Barrel 10 4* 203309 Washer, Flat, 3/8” 11 1 ...
6 ID# M867SF12 08/06 ;; ;; ;; ;; ;; ;; ;; ;; ;; ;; ;; ;; Insert J-bolts (19) from mounting plate (2) into cement as shown. Move assembly around to releaseany air pockets in cement, then rest mounting plate on cement drainage hill. Apply some pressure tolevel mounting plate on top of drainage hill. L...
