Spalding 21166904 - Manuals

Page 2 - WARNING

2 P/N 21166904 10/04 IMPORTANT! WRITE MODEL NUMBER FROM BOX ONTO PAGE 1 OF THIS OWNERS MANUAL WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. • See instructi...

Page 10 - SIDE VIEW

10 P/N 21166904 10/04 14. Attach handle plates (21) to vertical supports (18)as shown. Attach cable bracket (20) to handleplates (21) as shown. 54 23 23 54 23 23 55 55 54 54 21 20 21 18 18 SIDE VIEW

Page 13 - Opposite Side View

13 10/04 P/N 21166904 18. Run the cable from strut assembly around the pole,through the hole in the vertical support (18) and downthrough the hole in the cable bracket as shown (20).Place one nut on top of the cable bracket and onebelow as illustrated. Tighten the bottom nut until 1/8”of thread is e...

Page 16 - RIM ASSEMBLY & INSTALLATION

16 P/N 21166904 10/04 RIM ASSEMBLY & INSTALLATION WARNING 21. Install carriage bolt (41) through rim (25),washers (4) and (27) as shown. Tightennut (43) completely. Place nut (42) abouthalf-way up carriage bolt (41) as shown. 25 4 41 27 43 TWO PERSON MINIMUM REQUIRED FOR THIS PROCEDURE. NOT FOLL...

Page 17 - NOTE

17 10/04 P/N 21166904 24. 25 39 40 Insert spacer (45) through rim assembly (25). Place rim assembly on bracket (39) so that carriage bolt (41) isinserted through hole on top of inner bracket (40). Install hex bolt (44), washers (27) and nut (42) through topholes on bracket (39) through spacer (45) a...

Page 18 - LEVELING INSTRUCTIONS:; NOTE ORIENTATION OF COVER PLATE; OUTSIDE VIEW

18 P/N 21166904 10/04 26. 27. 28. Apply logo label (33) to cover plate (31). Installcover plate (31) on rim (25) using self tappingscrews (32) as shown. LEVELING INSTRUCTIONS: Place level on rim (25) and adjust nut (42) untillevel. Tighten nut (30) to set rim tension forplaying. Secure net (34) tori...

Page 23 - Jam Hex Nuts

23 10/04 P/N 21166904 Valve Valve Trigger released,locking elevator Trigger squeezed,unlocking elevator If the elevator is still difficultt o o p e r a t e , v e r i f y t h a t t h evalves located on the strutare fully depressed when thetrigger is activated. N O T E : t w o p e o p l e a r erequire...

Page 24 - PARTS LIST

24 P/N 21166904 10/04 Item Qty. Part No. Description 1 4 200573 J-Bolt, 1/2”-13 x 24” 2 12 265575 Nut, Hex 1/2”-13 3 1 920880 Mounting Plate 4 23* 203474 Washer, Flat 1/2” x 1” O.D. 5 1 980835 Pole 6 1 200544 Pole Cap, Square 7 12 206340 Nylon Insert Lock Nut, Hex 1/2”-13 8 8 220589 Cap, Arm Support...

Page 25 - HARDWARE IDENTIFIER

25 10/04 P/N 21166904 Item #41 (1) Item #30 (1) Item #32 (2) Item #42 (2) HARDWARE IDENTIFIER Item #44 (1) Item #45 (1) Item #43 (1) WARRANTY CARD: Please remember to complete your productregistration form on-line at:www.hydrarib.com/warrantycard Item #27 (12)* Item #29 (1) Item #38 (4) Item #54 (4)...