Soundmax SM-CDM1038 - User Manual

4 Installation/Connection Choose the mounting location where the unit will not interfere with the normal driving function of thedriver.Before finally installing the unit, connect the wiring and make sure that the unit works properly.Consult with your nearest dealer if installation requires the drill...

5 1. Install the sleeve into the dashboard; ensure it is installed with the correct side and there are no obstacles (wires, dashboard elements, etc) for the unit installation. 2. After installing the sleeve into the dashboard, bend tabs fitting to the size of the dashboard to fix the sleeve in place...

8 Electrical connections Notes: In spite of having any kinds of speaker system, must use 4 ohms impedance of speaker to reduce thedistortion during high volume level.Prohibit to make the conductors of auto antenna and ground touch with each other.

9 Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.2. For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit.Cut the c...

10 Control elements Front panel1. EJECT button2. Disc slot3. LCD display4. PREV/NEXT knob/MODE button5. AUX in6. POWER button7. LOUD button8. F/PS button9. 6/UP10 button10. 5/DN10 button11. 4/RDM button12. 3/RPT button13. 2/INT button14. 1/PLAY/PAUSE button15. CLK button16. BAND button17. VOL knob/S...

11 Inner panel 1. Disc slot2. Panel status indicator3. RESET button (hole) Pressing RESET hole will erase the clock setting and stored stations.Panel status indicator lights up when you slide the panel down, flashes when you remove the panel.

12 LCD layout 1. Mute indicator (not active) 17. TA function indicator (not active) 2. Loudness indicator 18. Audio playback indicator 3. Electronic shock protection indicator 19. Album name on 4, 5. Subwoofer indicator (not active) 20. Artist name on 6. Equalizer indicator 21. EON function indicato...

13 General operations Power buttonPress any button (except RELEASE and EJECT buttons) to switch the unit on. The display will show amessage “WELCOME”. Press and hold POWER button to switch the unit off.Note: After the unit is off, volume level and radio current settings will be memorized, and when y...

14 Clock setting You can set the clock displayed on the LCD. Press CLK button, then press and hold this button for 3seconds; clock will blink on the display. Rotate VOL knob clockwise to set hours. Rotate VOL knob anti-clockwise to set minutes. Press CLK button to save the settings.To display the cl...

16 Radio operations BAND selectionPress repeatedly BAND button to select your desired radio band in radio mode: FM1, FM2, FM3, AM1(MW1), AM2 (MW2). Each band can store 6 preset stations, for a total of 30 preset memory stations. TuningRotate repeatedly PREV/NEXT knob to manually adjust the radio fre...

17 Disc operations Loading/Eject a disc Insert the disc with the printed side facing upward into the slot. The CD will play automatically.If the disc is not removed from the slot within 10 seconds, it will automatically be loaded into the slotagain. When the disc is ejected and removed, the unit wil...

19 MP3/WMA overview Notes on MP3 and WMA MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard.This product allows playback of MP3 files on CD-ROM, CD-R or CD-RW discs.The unit can read MP3 files written in the format compliant with ISO 9660. However it does nots...

20 Notes on creating your own CD-Rs or CD-RWs containing MP3 files To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1kHz and a fixed bit rate o f 128 kbps.Do not store more than 256 MP3 files per disc.For ISO 9660 - compliant format, the maximum allow...

21 Handling compact discs Handling compact discs Do not insert anything other than a CD into the CD loading slot.Do not use cracked, chipped, warped, or otherwise damaged discs as they may cause skipping or noise damage the player. Handle the disc only by the edges (as shown in the picture). To keep...

22 Troubleshooting guide Below is a table describing simple measures that can help you eliminate most problems likely to emergewhen this unit is in use. If below measures do not help, turn to a service center or to the nearest dealer. Symptom Cause Solution No power The car ignition is not on. The f...

24 Specification GeneralPower supply 12 V DC Current consumption max. 10 Maximum power output 50Wx4 channels Fuse 1A & 10A Dimensions (L x W x H) 162 x 178 x 50 mm Temperature range -20 0 - +60 0 Installation angle 0 0 – +/-30 0 FM stereo radioFrequency range 87.5 - 108.0 MHz Presettable station...