Soundmax SM-CCR3030 - Manuals

Page 2 - Table of contents

2 Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefullybefore connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents .....................................

Page 3 - Important safeguards

3 Important safeguards - Read carefully through this manual to familiarize yourself with this high-quality sound system. - Use only in a 12-volt DC negative-ground electrical system. - Disconnect the vehicle's negative battery terminal while mounting and connecting the unit. - When replacing the fus...

Page 4 - Installation/ Connections; Installation way

4 Installation/ Connections First complete the electrical connections, and then check them for correctness. Installation way It is an anti-theft installation way. The chassis wear a metal sliding housing. Please have the wiring connection of the power supply, speakers and antenna as for the requirem...

Page 6 - Speaker connection

6 Speaker connection Notes: - In spite of having any kinds of speaker system, must use 4 ohms impedance of speaker to reduce thedistortion during high volume level. - Prohibit to make the conductors of auto antenna and ground touch with each other. R (Red) R (Red) L (White) L (White)

Page 7 - Panel controls; Front panel

7 Panel controls Front panel 1. OPEN BUTTON Press it to flip down the front panel to insert or eject the cassette. 2. VOL knob/ SEL button Rotate VOL knob clockwise to increase the volume level; rotate anticlockwise to decrease the volume level. Press the VOL/SEL button shortly to show the time on d...

Page 8 - Back of the front panel

8 4. POWER BUTTON Press the POWER or any other button to turn the power on. Press the POWER button to turn the power off. 5. << -/ >> + BUTTONS Tune down/ up / Track down/ up buttons. 6. PRESET STATION [1-6] BUTTONS 7. BND/ MODE BUTTON Press and hold for 2 seconds and then press it repea...

Page 9 - Remote control; Changing the battery

9 Remote control 1. Digit area2. ST button 3. MODE button4. MUTE button5. SCAN button6. CLOCK button7. BAND LOUD button 8. POWER button9. AS/PS button10. LOCAL button11. VOL SEL button 12. SEEK +/- buttons: use these buttons to enter the manual tuning mode/ seek tuning mode.Use this button to search...

Page 10 - Function of controls; General operations

10 Function of controls General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit.Press OPEN button and remove the panel, then press the RESET button to restore the unit to the original factory settings. Power button Press any...

Page 11 - Radio operations; Band select; Local/Distance Control

11 Radio operations Band select Press the BND/ MODE button on the front panel or BAND LOUD button or RC repeatedly to select your desired radio band during RADIO mode: FM1, FM2, FM3, AM1, AM2. Auto/ Manual tuning - Automatic tuning: Press the << -/ >> + buttons or SEEK buttons on the RC ...

Page 12 - Cassette operations; Loading a cassette; Play direction reverse; Cleaning; Cleaning the cabinet; Cleaning the heads of tape recorder

12 Cassette operations Loading a cassette - Turn the power on. - Press the OPEN button on the panel. Insert the cassette with the exposed tape side facing right into the slot. The playback will start automatically. Play direction reverse Press both the REWIND and FAST FORWARD buttons on the back of ...

Page 13 - Troubleshooting guide

13 Troubleshooting guide No power or nosound Car's engine switch is not on. Turn your car's key to ACC or ON.Cable is not correctly connected. Check connection.Fuse is burnt. Replace fuse. Check volume or mute on / off.If above solutions cannot help, press the RESET button. Sound skips due to vibrat...

Page 14 - Specification

14 Specification Specifications are subject to change without notice. Mass and dimension are approximate. General. Power supply: 12 V DC (12 V - 15 V), negative ground Maximum power output: 50 Wx4 channels Fuse: 15 A Suitable speaker impedance: 4 - 8 ohm Output wiring: 4 speakers only RCA line out: ...