Smeg TR90IBL9 - User Manual

Instructions 58 • Use cables withstanding a temperature of at least 90°C. • The tightening torque of the screws of the terminal supply wires must be 1.5 - 2 Nm. For this appliance • After use, switch off the plates. Never rely solely on the cookware detector. • Supervise children carefully as they c...

Instructions 59 EN 1.2 Appliance purpose • This appliance is intended for cooking food in the home environment. Every other use is considered improper. • The appliance is not designed to operate with external timers or with remote-control systems. 1.3 Manufacturer liability The manufacturer declines...

Instructions 60 • Deliver the appliance to the appropriate recycling centre for electrical and electronic equipment waste, or return it to the retailer when purchasing an equivalent product, on a one for one basis. Our appliances are packaged in non-polluting and recyclable materials.• Deliver the p...

Description 61 EN 2 Description 2.1 General Description 1 Upstand 2 Cooking hob 3 Control panel 4 Oven light 5 Seal 6 Door 7 Fan 8 Storage compartment Rack/tray support frames

Description 62 2.2 Cooking hob * Power levels are approximate and can vary according to the pan used or the settings made. Advantages of induction cooking • Energy saving thanks to the direct transmission of energy to the pan (suitable magnetisable cookware is required) compared to traditional elect...

Description 63 EN 2.3 Control panel 1 Function knob The oven’s various functions are suitable for different cooking modes. After selecting the required function, set the cooking temperature using the temperature knob. 2 Temperature knob This knob allows you to select the cooking temperature.Turn the...

Description 64 2.4 Other parts Shelves The appliance features shelves to position trays and racks at different heights. The insertion heights are indicated from the bottom upwards (see 2.1 General Description ). Cooling fan The fan cools the oven and comes into operation during cooking.The fan cause...

Description 65 EN Deep tray Useful for collecting fat from foods placed on the rack above and for cooking pies, pizzas and baked desserts. Rotisserie Useful for cooking chicken and all foods which require uniform cooking over their entire surface. Some models are not provided with all accessories. T...

Use 66 3 Use 3.1 Instructions High temperature inside the oven during use Danger of burns • Keep the oven door closed during cooking. • Protect your hands by wearing oven gloves when moving food inside the oven. • Do not touch the heating elements inside the oven. • Do not pour water directly onto v...

Use 67 EN 3.2 First use 1. Remove any protective film from the outside or inside of the appliance, including accessories. 2. Remove any labels (apart from the technical data plate) from the accessories and from the oven cavity. 3. Remove and wash all the appliance's accessories (see 4 Cleaning and m...

Use 68 Racks and trays Racks and trays have to be inserted into the side guides until they come to a complete stop.The mechanical safety locks that prevent the rack from being taken out accidentally must face downwards and towards the back of the oven. Rotisserie 1. Insert the 4 supplied bushings in...

Use 70 8. When cooking is complete, remove the tray with the rotisserie. 9. Screw on the handle provided so that you can handle the rotisserie rod more easily. 3.4 Using the storage compartment There is a storage compartment located at the bottom of the cooker; this can be used to store pans or meta...

Use 71 EN To see whether the pan is suitable, bring a magnet close to the bottom: if it is attracted, the pan is suitable for induction cooking. If you do not have a magnet, you can put a small amount of water in the pan, place it on a cooking zone and start the hot plate. If the symbol appears on t...

Use 72 Limiting the cooking duration The hob has an automatic device which limits the duration of use. If the cooking zone settings are not changed, the maximum duration of operation for each zone depends on the power level selected.When the device for limiting the duration of use is activated, the ...

Use 73 EN Power levels The power in the cooking zone can be adjusted to various levels. The table shows the levels suitable for various types of cooking. * see booster function Residual heat If the cooking zone is still hot after being switched off, the symbol will be displayed on the display. The s...

Use 74 Heating accelerator This function allows the selected power to be achieved in the shortest amount of time.1. Turn the knob anti-clockwise to position A and then release it. The display shows the symbol . 2. Select the required heating power ( 1 - 8 ) within 3 seconds. The selected power and s...

Use 75 EN Power control The hob is fitted with a power control module that optimises/limits consumption. If the overall set power level exceeds the maximum limit permitted, the electronic circuit board will automatically manage the power supplied by the hot plates.The module tries to maintain the ma...

Use 76 3.6 Using the oven Switching on the oven To switch on the oven:1. Select the cooking function using the function knob. 2. Select the temperature using the temperature knob. Functions list Ensure that the programmer clock shows the cooking duration symbol , otherwise it will not be possible to...

Use 77 EN Fan assisted The operation of the fan, combined with traditional cooking, ensures consistent cooking even with complex recipes. Perfect for biscuits and cakes, even when simultaneously cooked on several levels. (For multiple-level cooking, we recommend using the 2 nd and 4 th shelf). Fan w...

Use 78 3.7 Cooking advice General advice • Use a fan assisted function to achieve consistent cooking at several levels. • It is not possible to shorten cooking times by increasing the temperature (the food could be overcooked on the outside and undercooked on the inside). • For the same total weight...

Use 79 EN • To defrost meat, use the rack placed on the second level and a tray on the first level. In this way, the liquid from the defrosting food drains away from the food. • Bread and fruit, if divided into pieces, will take the same amount of time to defrost, regardless of the total weight and ...

Use 80 Setting the time On the first use, or after a power failure, the digits will be flashing on the appliance’s display. 1. Press the keys and at the same time. The dot between the hours and the minutes flashes. 2. The time can be set using the key or . Keep the key pressed in to increase or decr...

Use 81 EN 6. Press the keys and at the same time to reset the programmer clock. Programmed cooking 1. Set the cooking time as described in the previous section “Timed cooking” . 2. Press the key . The sum of the current time plus the pre-set cooking duration will appear on the display. 3. Use the ke...

Use 82 Minute minder timer The minute minder timer can be activated at any time. 1. Press the key . The display shows the digits and the indicator light flashing between the hours and the minutes. 2. Use the key or to set the required minutes. 3. Wait approx. 5 seconds without pressing any key to fi...

Use 83 EN Cooking information table Food Weight (Kg) Function Shelf Temp. (°C) Time (minutes) Lasagne 3 - 4 Static 1 220 - 230 45 - 50 Pasta bake 3 - 4 Static 1 220 - 230 45 - 50 Roasted veal 2 Circulaire/Fan assisted 2 180 - 190 90 - 100 Pork loin 2 Circulaire/Fan assisted 2 180 - 190 70 - 80 Sausa...

Cleaning and maintenance 84 4 Cleaning and maintenance 4.1 Instructions 4.2 Cleaning the appliance Recommendations for cleaning the hob To keep the surfaces in good condition, they should be cleaned regularly after use. Let them cool first. Ordinary daily cleaning Always and only use specific produc...

Cleaning and maintenance 85 EN Dirt which may have fallen on the hob while cleaning lettuce or potatoes can scratch the hob when moving pans.Consequently, remove any dirt from the cooking surface immediately. Changes in colour do not affect the operation and stability of the glass. These are not alt...

Cleaning and maintenance 86 Removing rack/tray support frames Removing the rack/tray support frames enables the sides to be cleaned more easily.To remove the rack/tray support frames:• Pull the frame towards the inside of the oven to unhook it from its groove A , then slide it out of the seats B at ...

Cleaning and maintenance 87 EN 4.3 Vapor Clean Preliminary operations Before starting the Vapor Clean cycle:• Completely remove all accessories from inside the oven. • Pour approximately 40 cc of water into the tray. Make sure it does not overflow out of the cavity. • Spray a water and washing up li...

Cleaning and maintenance 88 Vapor Clean cycle setting 1. Set a cooking time of 18 minutes using the programmer clock. 2. Turn the function knob to the symbol and the temperature knob to the symbol . The Vapor Clean cycle starts a few seconds after the last press on the programmer clock keys.3. At th...

Cleaning and maintenance 89 EN 2. Grasp the door on both sides with both hands, lift it forming an angle of around 30° and remove it. 3. To reassemble the door, put the hinges in the relevant slots in the oven, making sure that grooved sections A are resting completely in the slots. Lower the door a...

Cleaning and maintenance 90 5. Remove the intermediate glass pane by lifting it upwards. 6. Clean the external glass pane and the panes removed previously. Use absorbent kitchen roll. In case of stubborn dirt, wash with a damp sponge and neutral detergent. 7. When you have finished cleaning, reinser...

Cleaning and maintenance 91 EN Replacing the internal light bulb 1. Completely remove all accessories from inside the oven. 2. Remove the rack/tray support frames. 3. Remove the bulb cover using a tool (e.g. a screwdriver). 4. Slide out and remove the light bulb. 5. Fit the new light bulb. 6. Refit ...

Cleaning and maintenance 92 What to do if... The appliance is not working properly: • The switch is defective: check the fuse box to see whether the switch is in working order. • Loss of power: check that the appliance indicator lights are operational. The gas burner does not light: • Loss of power ...

Installation 93 EN 5 Installation 5.1 Positioning Dimensions 1 Minimum distance from side walls or other flammable material. 2 Minimum cabinet width ( =A ). Heavy appliance Crushing hazard • Position the appliance into the cabinet cut-out with the help of a second person. Pressure on the door Risk o...

Installation 94 Appliance dimensions Position of gas and electrical connections. General information This appliance may be installed next to walls, one of which must be higher than the worktop, at a minimum distance of 50 mm from the side of the appliance, as shown in figures A and C relative to the...

Installation 95 EN B - Class 2 subclass 1 (Built-in appliance) C - Class 2 subclass 1 (Built-in appliance) Positioning and levelling The appliance must sit level on the floor to ensure stability.• After making the gas and electrical connections, level and stabilise the appliance on the floor by scre...

Installation 96 Assembling the upstand The upstand must always be positioned and secured correctly on the appliance.1. Loosen the 6 screws on the back of the hob ( A ) and unscrew the 2 screws ( B ) on the side part of the upstand. 2. Place the upstand on the hob. Align the 6 bottom slots of the ups...

Installation 97 EN Fastening to the wall 1. Screw the wall fastening plate to the rear of the appliance. 2. Adjust the height of the 4 feet. 3. Assemble the fastening bracket. 4. Align the base of the hook on the fastening bracket with the base of the slot on the wall fastening plate. The anti-tip d...

Installation 98 5. Align the base of the fastening bracket with the ground and tighten the screws to fix the measurements. 6. Use 50 mm for the distance from the side of the appliance to the bracket holes. 7. Move the bracket onto the wall and mark the position of the holes to be drilled in the wall...

Installation 99 EN 5.2 Electrical connection General information Check the grid characteristics against the data indicated on the plate.The identification plate bearing the technical data, serial number and brand name is visibly positioned on the appliance.Do not remove this plate for any reason.Per...

Installation 100 The appliance can work in the following modes:• 220-240 V 2 ~ 3 x 10 mm² three-core cable. • 3220-240 V 3 ~ 4 x 4 mm² four-core cable. • 220-240 V 1N ~ 3 x 10 mm² three-core cable. • 380-415 V 2N ~ 4 x 4 mm² four-core cable. • 380-415 V 3N ~ 5 x 2.5 mm² five-core cable. Replacement ...

Installation 101 EN Accessing the terminal board To connect the power supply cable, you must access the terminal board on the rear casing:1. Remove the screws fastening the plate to the rear casing. 2. Gently rotate the plate and remove it from its seat. 3. Proceed with installation of the power sup...

Installation 102 5.3 Instructions for the installer • The plug must be accessible after installation. Do not bend or trap the power cable. • The appliance must be installed according to the installation diagrams. • If the appliance does not work correctly after having carried out all the checks, con...