Page 2 - Contents
EN 3 1. Safety and operating instructions____________________________ 3 2. Installation and hook-up ___________________________________ 7 3. Description of the controls _________________________________ 10 4. Operating instructions ____________________________________ 18 5. Cleaning and maintenance ...
Page 3 - ALL; Safety instruction
4 EN 1. Safety and operating instructions THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE: IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER. BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY A QUALIFIED TECHNICIA...
Page 4 - Safety Instruction
EN 5 THIS APPLIANCE IS MARKED ACCORDING TO THE EUROPEAN DIRECTIVE 2002/96/EC ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT ( WEEE ). BY ENSURING THIS PRODUCT IS DISPOSED OF CORRECTLY, YOU WILL HELP PREVENT POTENTIAL NEGATIVE CONSEQUENCES FOR THE ENVIRONMENT AND HUMAN HEALTH, WHICH COULD OTHERWISE BE ...
Page 5 - EN; The manufacturer declines all responsibility; damage to persons or property; Safety Instructions
6 EN DO NOT DRINK THE WATER RESIDUES WHICH MAY BE PRESENT INSIDE THE DISHES OR DISHWASHER AT THE END OF THE WASHING PROGRAM AND BEFORE THE DRYING CYCLE. KNIVES OR OTHER SHARP-ENDED COOKING UTENSILS MUST BE PLACED IN THE CUTLERY BASKET BLADE-DOWN, OR LAID HORIZONTAL AND ENSURE THAT THEY DO NOT PROJEC...
Page 6 - Installation instructions
EN 7 2. Installation and hook-up Remove the polystyrene basket retainers.Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source, fi t the special insula...
Page 7 - Water supply connection; Preventing the risk of clogging or damage:; CONNECTING TO THE WATER SUPPLY; supplied with the dishwasher.; Take care to screw the hose fi rmly into; DRAIN CONNECTION; Fit the drain hose into a pipe having diameter of; at least 4 cm; Electrical connection and precautions; DO NOT USE ADAPTORS OR SHUNT CONNECTIONS; Installation Instructions
8 EN 2.1 Water supply connection Preventing the risk of clogging or damage: the water pipe is new or has not been used for a long time, before connecting to the water supply check that the water is clear and free of impurities, to prevent damage to the appliance. The dishwasher must always be connec...
Page 8 - WHEN CLEANING AND MAINTAINING THE APPLIANCE:; THIS APPLIANCE MUST BE EARTHED.; The fuse cover must be refi tted when changing a fuse
EN 9 In the event of damage to the supply cord, have it replaced by the an Authorized Technical Service Centre in order to avoid any risk. If this lamp needs changing, contact the manufacturer or an Authorised Service Centre.The lamp must be of the same type and have the same characteristics as the ...
Page 9 - Upper panel; Pressing this button energises the appliance.; Us
10 EN 3. Description of the controls 3.1 Upper panel All the dishwasher controls are grouped on the upper panel. Switch-on, programming, switch-off etc. procedures are only possible when the door is open. 1 ON/OFF BUTTON Pressing this button energises the appliance. 2 SELECTED PROGRAM INDICATOR LIGH...
Page 10 - WASH; If one of the lights is on, the; User Instructions
EN 11 8 "2/1" OPTION BUTTON Press this button to activate the option for use of 2 /1 products. 9 "2/1" OPTION LIGHT Illuminates to indicate that the function is activated. 10 WASH -ZONE BUTTON Press this button to select the zone where you wish to concentrate the washing action. 11 W...
Page 11 - User instructions; SETTING THE WASHING PROGRAM AND SWITCHING ON; PROGRAM INDICATOR LIGHT
User instructions 12 EN SETTING THE WASHING PROGRAM AND SWITCHING ON To select the most suitable program for the dishes to be washed refer to the tablebelow, which indicates the most appropriate program according to dish type anddegree of soiling. After using the table to identify the most appropria...
Page 12 - The door can be opened at the end of the cycle approximately; run the soak program with partial loads.; Only; The
EN User instructions EN User instructions EN User instructions 13 PROGRAMME Nr Symbol Name LOAD CROCKERY AND CUTLERY PROGRAM PROGRESS DURATION CONSUMPTION MINUTES (1) WATER LITRES ENERGY (KWh) (1) DETERGENT 7 8 9 10 RINSE LIGHT BIO INTENSIVE SUPER Clean mixed dishes requiring rinsing and warmingbefo...
Page 13 - Washing programs; Before starting a washing program make sure that:; CANCELLING THE CURRENT PROGRAM; button for a few seconds until the; indicator; for programs; CHANGING THE PROGRAM
User instructions 14 EN 3.2 Washing programs Before starting a washing program make sure that: • The water supply tap is open. • The correct amount of detergent has been added to the dispenser . • The baskets have been correctly loaded. • The spray arms are able to rotate freely and without obstruct...
Page 14 - when the relative
EN User instructions 15 EXTRA PROGRAMS Button (6) gives access to fi ve extra programs in addition to the ones which can be selected directly using the program selector button.This button must be pressed (the light comes on) after selection of the “main” program (1, 2, 3, 4 or 5).This function is ret...
Page 16 - END OF CYCLE
User instructions 17 EN END OF CYCLE At the end of the program the beeper sounds briefl y and the lights of programs 4 and 5 fl ash. To switch off the dishwasher, open the door and press the ON/OFF button (1) . REMOVING THE DISHES At the end of the washing program, wait at least 20 minutes before remo...
Page 17 - Using the rinse aid and detergent dispensers; detergent; is on the left, and the; rinse; RINSE AID; Operating instructions; d the rinse aid and detergent.; ADDING THE RINSE AID
User instructions 18 EN 3. 1 Using the rinse aid and detergent dispensers The detergent and rinse aid dispensers are situated on the inner part of the door: the detergent dispenser is on the left, and the rinse aid dispenser is on the right. RINSE AID DETERGENT With the exception of the SOAK program...
Page 18 - The optical level indicator; ADJUSTING THE RINSE AID DISPENSER SETTING; increased; ADDING THE DETERGENT
EN User instructions 19 To add rinse aid:• Open the door.• Open the door “S” . • Add the rinse aid until the container is full (approximately 140 cc). The optical level indicator “O” on the side of the cap should be completely obscured. Refi ll the rinse aid when the optical level indicator becomes c...
Page 20 - General warnings and recommendations; Before loading the dishes into the baskets it is necessary to:
EN User instructions 21 4.3 General warnings and recommendations Before using the dishwasher for the fi rst time, it is advisable to read the following recommendations concerning dish types to be washed and their loading.There are generally no constraints on the washing of domestic dishes, but in cer...
Page 21 - MAKE SURE that the items being washed are dishwasher-safe.
User instructions 22 EN WARNING! • Make sure that the dishes are securely in place so that they cannot tip over or obstruct the rotation of the spray arms during the washing cycle. • Do not place very small objects in the baskets as these could fall and obstruct the spray arms or the wash pump. • Co...
Page 22 - Using the baskets; The dishwasher has a capacity of
EN User instructions 23 4.4 Using the baskets The dishwasher has a capacity of 12 place-settings , including serving dishes.
Page 24 - CUTLERY BASKET; Cutlery must be placed with the; tips facing downward; The cutlery basket features an; exclusive system; of independent; up supports; , offering a series of combinations to allow optimum use of the
EN User instructions 25 CUTLERY BASKET Cutlery must be placed with the tips facing downward . The cutlery basket features an exclusive system of independent sliding tip- up supports , offering a series of combinations to allow optimum use of the space available. It can also be separated into two par...
Page 25 - General warnings and recommendations
User instructions 26 EN 5. Cleaning and maintenance Before carrying out any work, always disconnect the appliance from the electrical power supply. 5.1 General warnings and recommendations Avoid the use of acidic or abrasive detergents. Clean the outer surfaces and door-lining of the dishwasher regu...
Page 26 - CLEANING THE FILTER UNIT; • It is advisable to periodically inspect the centre fi lter; To remove the; upper
EN User instructions 27 CLEANING THE FILTER UNIT • It is advisable to periodically inspect the centre fi lter C and, if necessary, to clean it. To remove the fi lter, grip the tabs, turn them anticlockwise and lift upwards; • push the centre fi lter D from the underside to remove it from the micro-fi lt...
Page 28 - If the dishes are not being cleaned properly, check that:
EN User instructions 29 If the dishes are not being cleaned properly, check that: • the correct amount of detergent has been added; • there is no object obstructing the rotation of the spray arms; • the dishes are being loaded correctly; • the selected program is suitable for the dish types and thei...
Page 30 - FAULT; Light off
EN User instructions 31 FAULT DESCRIPTION E7 Turbine fl ow-regulator malfunction (some models sonly) The appliance is not able to “measure” the amount of water loaded accurately. Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and start the washing...
Page 31 - TECHNICAL DATA; 2 Standard place settings; Water supply pressure; See rating plate
User instructions 32 EN TECHNICAL DATA Width 858 mm Depth measured fl ush with the outer edge of the control panel 550 mm Height (depending on models) 580 mm Capcity 12 Standard place settings Water supply pressure min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar) Electrical characteristics See rating...
