Page 3 - Contents
Contents 1 1. Safety and operating instructions ___________________________ 2 2. Installation and hook-up __________________________________ 5 3. Description of the controls _______________________________ 10 4. Operating instructions ___________________________________ 18 5. Cleaning and maintenanc...
Page 4 - Safety instructions; Safety and operating instructions; AND; DIRECTIVES; DO NOT USE STEAM CLEANERS TO CLEAN THE DISHWASHER.
Safety instructions 2 1. Safety and operating instructions THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE: IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER. BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY A QU...
Page 7 - Installation instructions; door hinge area must be covered for safety
Installation instructions 5 2. Installation and hook-up Remove the polystyrene basket retainers. Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source...
Page 8 - Water supply connection; CONNECTING TO THE WATER SUPPLY
Installation instructions 6 2.1 Water supply connection Preventing the risk of clogging or damage: if the water pipe is new or has not been used for a long time, before connecting to the water supply check that the water is clear and free of impurities, to prevent damage to the appliance. The dishwa...
Page 9 - DRAIN CONNECTION
Installation instructions 7 DRAIN CONNECTION Insert the dishwasher’s drain hose into a drain pipe having a diameter of at least 4 cm, or alternatively, place it inside the kitchen sink using the plastic support provided, taking care not to crush or excessively bend the hose. It is important to preve...
Page 10 - Electrical connection and precautions; THE PLUG MUST BE ACCESSIBLE AFTER INSTALLATION.; IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD:
Installation instructions 8 2.2 Electrical connection and precautions CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH THE RATINGS ON THE NAME PLATE OF THE APPLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR. THE PLUG ON THE SUPPLY CORD AND THE CORRESPONDING SOCKET OUTLET MUST BE OF THE SA...
Page 11 - Class of protection against electric shock: I; THIS APPLIANCE MUST BE EARTHED.; Fuse replacement
Installation instructions 9 Class of protection against electric shock: I FOR GREAT BRITAIN ONLY: THIS APPLIANCE MUST BE EARTHED. Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS...
Page 12 - User instructions; Description of the controls; Upper panel; SELECTED PROGRAM INDICATOR LIGHTS
User instructions 10 3. Description of the controls 3.1 Upper panel All the dishwasher controls are grouped on the upper panel. Switch-on, programming, switch-off, etc. procedures are only possible when the door is open. The panel shown is only a guideline example: the form of the lights and buttons...
Page 14 - PROGRAMS TABLE
User instructions 12 PROGRAMS TABLE The manual contains the programs table for several models. To find the table for your dishwasher, compare the program symbols at the top of the table with those on your control panel. SETTING THE WASHING PROGRAM AND SWITCHING ON After identifying the most suitable...
Page 15 - SOAK; NORMAL; Only run the soak program with partial loads.; or 2 cold rinses depending on the model.
User instructions 13 PROGRAMS TABLE PROGRAMME NUMBER & SYMBOL LOAD CROCKERY AND CUTLERY PROGRAM PROGRESS DURATION CONSUMPTION MINUTES (1) WATER LITRES POWER KWh (1) 1 SOAK Pans and dishes awaiting completion of the load Cold prewash 15 3,5 0,02 2 NORMAL ECO (*) Crockery and cutlery normally soil...
Page 16 - Washing programs; Before starting a washing program make sure that:
User instructions 14 3.2 Washing programs Before starting a washing program make sure that: • The water supply tap is open. • The softener container contains regenerating salt. • The correct amount of detergent has been added to the dispenser. • The baskets have been correctly loaded. • The spray ar...
Page 17 - ULTRA CLEAN
User instructions 15 "Flexi Tabs" (on some models only) The option is optimised for use of detergents which are complete with salt and rinse aid, known on the market as, "triple action", etc. With this option activated, any salt and rinse aid If you wish to use detergents which alrea...
Page 18 - CANCELLING THE CURRENT PROGRAM
User instructions 16 PROGRAM DELAY The start of the program can be delayed by 3, 6 or 9 hours. This allows you to set the dishwasher to work at the times of day most convenient to you. After setting the program, press the button to select the delay you require; the corresponding light will come on. ...
Page 19 - TO SAVE ON ENERGY! ... AND PROTECT THE ENVIRONMENT; ENERGY MANAGEMENT
User instructions 17 TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT • Always use the dishwasher with a full load. • Do not wash the dishes in running water. • Use the washing program that is most appropriate for each type of load. • Do not carry out any preliminary rinsing. • If available, connect...
Page 20 - Operating instructions; Adjust the water softening system; Using the water softening system
User instructions 18 4. Operating instructions Once the dishwasher has been correctly installed, prepare for use as follows: • Adjust the water softening system; • Add the regenerating salt; • Add the rinse aid and detergent. 4.1 Using the water softening system The amount of scale contained in the ...
Page 21 - ADJUSTING THE WATER SOFTENING SYSTEM
User instructions 19 • Do not use table salt as it contains insoluble substances which, over time, may damage the water softening system. • When necessary, refill the regenerating salt container before starting the washing program. In this way, the excess saline solution will be immediately removed ...
Page 22 - WATER HARDNESS TABLE; WATER HARDNESS; Using the rinse aid and detergent dispensers; The
User instructions 20 WATER HARDNESS TABLE WATER HARDNESS SETTING German degrees (°dH) French Degrees (°dF) 0 - 6 0 - 11 All lights off (no salt) 7 - 10 12 - 18 One light on 11 - 15 19 - 27 Two lights on 16 - 21 28 - 37 Three lights on 22 - 28 38 - 50 Four lights on 29 - 35 51 - 62 Five lights on 36 ...
Page 23 - ADDING THE RINSE AID; Rotate the container cap anticlockwise by 1⁄4 of a turn and remove it.; ADJUSTING THE RINSE AID DISPENSER SETTING
User instructions 21 ADDING THE RINSE AID The rinse aid helps the dishes dry faster and prevents the formation of scale deposits and staining; it is automatically added to the water during the final rinse cycle, from the container situated on the inner side of the door. To add rinse aid: • Open the ...
Page 24 - ADDING THE DETERGENT; - Detergents containing phosphates are more effective against
User instructions 22 ADDING THE DETERGENT To open the detergent dispenser cap, lightly press the button P. Add the detergent and close the cap carefully. During the washing cycle, the dispenser will be opened automatically. • When a program with hot prewash is selected (see program table), extra det...
Page 25 - General warnings and recommendations
User instructions 23 The introduction of detergent into the rinse aid dispenser, even in liquid form, will damage the dishwasher. 4.3 General warnings and recommendations Before using the dishwasher for the first time, it is advisable to read the following recommendations concerning dish types to be...
Page 27 - Using the baskets; LOWER BASKET; With fixed supports; BOTTOM BASKET INSERTS
User instructions 25 4.4 Using the baskets The dishwasher has a capacity of 14 place-settings, including serving dishes. LOWER BASKET The lower basket receives the full force of the lower spray arm, and should therefore be used for the “toughest” items with a heavier degree of soiling. All types and...
Page 28 - LOADING THE LOWER BASKET
User instructions 26 LOADING THE LOWER BASKET Carefully load flat plates, soup plates, dessert and serving dishes, positioning them vertically. Pots, pans and their covers must be loaded upside down. When loading soup plates and dessert bowls, be sure to leave a gap between them. Loading examples: C...
Page 29 - UPPER BASKET
User instructions 27 The cutlery basket slides across the dishwasher and can be placed in any position to allow optimal use of the space in the bottom basket. UPPER BASKET It is recommended to load the upper basket with small- or medium-sized items such as glasses, small plates, tea or coffee cups, ...
Page 31 - ADJUSTING THE UPPER BASKET; Pull out both the basket guides.; Return the stops to their original position.
User instructions 29 ADJUSTING THE UPPER BASKET The height of the top basket can be adjusted to allow large dishes or pans to be placed in the bottom basket. The adjustment procedure may be type A or B, depending on the dishwasher model purchased. Version A: pull-out with adjustment in two positions...
Page 32 - Cleaning and maintenance; Avoid the use of acidic or abrasive detergents.; ORBITAL
User instructions 30 5. Cleaning and maintenance Before carrying out any work, always unplug the appliance from the electrical supply or switch off the all-pole disconnection device. 5.1 General warnings and recommendations Avoid the use of acidic or abrasive detergents. Clean the outer surfaces and...
Page 33 - CLEANING THE FILTER UNIT; remove the centre filter by lifting it upwards.
User instructions 31 CLEANING THE FILTER UNIT • It is advisable to periodically inspect the centre filter C and, if necessary, to clean it. To remove the filter, grip the tabs, turn them anticlockwise and lift upwards; • push the centre filter D from the underside to remove it from the micro-filter:...
Page 34 - Plug the power cord back into the socket.
User instructions 32 BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE: • Check that there are no deposits of sludge or rust inside the water pipe: if there are, allow the water to run from the water supply tap for a few minutes. • Plug the power cord back into the socket. • Reconnect the water ...
Page 35 - there is rinse aid inside the special container
User instructions 33 If the dishes fail to dry or remain dull, check that: • there is rinse aid inside the special container; • the rinse aid dispenser setting is correct; • the detergent used is of good quality and has not lost its effectiveness (for example, through incorrect storage, with the box...
Page 36 - FAULT
User instructions 34 6. Troubleshooting The dishwasher is capable of signalling a number of faults through the simultaneous illumination of several indicator lights, with the following meanings: FAULT DESCRIPTION E1 Acquastop failure The anti-flooding system has been activated (for the relevant mode...
Page 37 - Light off
User instructions 35 FAULT DESCRIPTION E7 Turbine flow-regulator malfunction (for the relevant models only) The appliance is not able to "measure" the amount of water loaded accurately. Interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again and s...
Page 38 - TECHNICAL DATA; 4 Standard place settings; Water supply pressure; See rating plate
User instructions 36 TECHNICAL DATA Width 597 ÷ 599 mm Depth measured flush with the outer edge of the control panel 550 mm Height (depending on models) from 820 mm to 890 mm from 860 mm to 930 mm Capacity 14 Standard place settings Water supply pressure min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 b...
