Smeg SRV531X5 - User Manual
Smeg SRV531X5 Hob – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Introduction; INSTRUCTIONS FOR SAFE AND PROPER USE
- Page 3 – The manufacturer declines all responsibility; for damage to persons
- Page 4 – Instructions for the installer; POSITIONING OF HOB; metal, solid wood or plastic laminated wood as long as they are heat; Attachment to support structure; from the; on the inner side
- Page 5 – panel has to be placed under the hob. Keep a minimum distance of; mm; between the bottom of the unit and the panel surface. The panel
- Page 6 – ELECTRICAL CONNECTION; Do not remove this; , located in an easily accessible; The manufacturer will not be liable; for any damage to persons or
- Page 7 – GAS CONNECTION; rigid copper pipe; any moving parts or become damaged.
- Page 8 – Connection to LPG
- Page 9 – ADAPTATION TO DIFFERENT TYPES OF GAS; Before performing any cleaning or maintenance work, detach the; natural gas; at a pressure of; Removing the hob; remove the screws and the nuts
- Page 10 – Regulation for LPG
- Page 11 – Regulation for natural gas; The hob has been inspected for; Regulation for town gas; Regulation for LPG”, but choose
- Page 12 – Regulation of primary air; Referred to distance “
- Page 13 – FINAL OPERATIONS; Regulation of minimum for natural gas; the new gas. The label is inside the bag that contains the nozzles
- Page 14 – Arrangement of burners on hob; Lubrication of gas taps; This must be done by a qualified technician.
- Page 15 – Instructions for the user; USING THE HOB; Ignition of the burners; burners comprise an auxiliary and a rapid burner,
- Page 16 – Practical advice for using the burners; Using a griddle plate; A few precautions are necessary if you wish to use a griddle plate:
- Page 17 – Electric elements; Turning on electric elements
- Page 18 – WARNING; To use correctly remember to:
- Page 19 – CLEANING AND MAINTENANCE; Never use a steam jet to clean the appliance.; Cleaning; Regular daily cleaning of the hob; , which do not contain abrasive substances or chlorine-based acid; Food stains or residues; Rinse thoroughly and dry with a soft cloth or deerskin.
- Page 20 – Cleaning of cooking hob components; to fully dry out; CAUTION: do not wash these components in a dishwasher.; Ignition plugs and safety devices; Check frequently and clean with a damp cloth when necessary.; The electric element
Contents
INSTRUCTIONS FOR SAFE AND PROPER USE _______________ 23
POSITIONING OF HOB ___________________________________ 25
ELECTRICAL CONNECTION ______________________________ 27
GAS CONNECTION ______________________________________ 28
ADAPTATION TO DIFFERENT TYPES OF GAS _______________ 30
FINAL OPERATIONS _____________________________________ 34
USING THE HOB ________________________________________ 36
CLEANING AND MAINTENANCE ___________________________ 40
THESE INSTRUCTIONS ARE VALID ONLY FOR END USER COUNTRIES WHOSE
IDENTIFICATION SYMBOLS APPEAR ON THE COVER OF THIS MANUAL.
INSTRUCTIONS FOR THE INSTALLER: these are for the
qualified
technician
who must carry out a suitable check of the gas system,
install the appliance, set it functioning and carry out an inspection test.
INSTRUCTIONS FOR THE USER: these contain user advice,
description of the commands and the correct procedures for cleaning
and maintenance of the appliance.
22
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Introduction 1. INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE COOKING HOB. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING THE C...
Introduction THE IDENTIFICATION PLATE, WITH TECHNICAL DATA, SERIAL NUMBER AND MARKING IS CLEARLY VISIBLE UNDER THE CASING. THE PLATE ON THE CASING MUST NOT BE REMOVED. BEFORE CONNECTING THE DEVICE, MAKE SURE THAT IT HAS BEEN REGULATED FOR THE TYPE OF GAS THAT WILL FEED IT, CHECKING THE LABEL UNDER T...
Instructions for the installer 25 2. POSITIONING OF HOB The following operation requires building and/or carpentry work so must be carried out by a competent tradesman. Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminated wood as long as they a...