Smeg SRA975NGH - User Manual

Smeg SRA975NGH

Smeg SRA975NGH Hob – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
Page: / 16

Table of Contents:

  • Page 2 – Introduction; INSTRUCTIONS FOR SAFE AND PROPER USE
  • Page 3 – The manufacturer declines all responsibility; for damage to
  • Page 4 – Instructions for the installer; POSITIONING OF THE HOB; It is the law that all gas appliances are installed by; Attachment to support structure; from the; on the inner side
  • Page 5 – Clearance above and around domestic appliances
  • Page 6 – REQUIREMENTS
  • Page 7 – Room ventilation; Caution; – This hob may only be installed and operated in rooms; Discharge of combustion products; mm; between the bottom of the hob and the surface of the panel, which
  • Page 8 – GAS CONNECTION; annealed copper pipe or
  • Page 9 – ELECTRICAL CONNECTION; Do not remove this; , located in an easily accessible; The manufacturer will not be liable; for any damage to persons or
  • Page 10 – ADAPTATION TO DIFFERENT TYPES OF GAS; Before performing any cleaning or maintenance work, detach the; natural gas; Removing the hob
  • Page 11 – Adjustment for natural gas; The hob has been adjusted for
  • Page 12 – FINAL OPERATIONS; Adjustment of minimum for natural gas; Light the burner and take it to the minimum; Arrangement of burners on the hob; Burners; Lubrication of gas taps; This operation must be done
  • Page 13 – USING THE HOB; Adapter; Ignition of the burners
  • Page 14 – Instructions for the user; Practical advice for using the burners; CLEANING AND MAINTENANCE; Cleaning
  • Page 15 – Regular daily cleaning of the hob; , which do not contain abrasive substances or chlorine-based acid; Food stains or residues; Cleaning of the hob components; to fully dry out; Preventive maintenance; the burners must be cleaned after every use to ensure correct
  • Page 16 – if a flexible pipe is used, it must be inspected periodically; PROBLEMS AND CAUSES; PROBLEM; Call Service Center.
Loading the manual

Contents

3


1.

INSTRUCTIONS FOR SAFE AND PROPER USE ________________ 4

2.

POSITIONING OF THE HOB ________________________________ 6

3.

GAS CONNECTION ______________________________________ 10

4.

ELECTRICAL CONNECTION ______________________________ 11

5.

ADAPTATION TO DIFFERENT TYPES OF GAS _______________ 12

6.

FINAL OPERATIONS _____________________________________ 14

7.

USING THE HOB ________________________________________ 15

8.

CLEANING AND MAINTENANCE ___________________________ 16

9.

PROBLEMS AND CAUSES ________________________________ 18








Thank you for choosing our product.
We advise you to read this manual carefully. It contains all necessary
instructions for maintaining unaltered the appearance and functional
qualities of the hob.



NSTRUCTIONS FOR THE INSTALLER: these are for the

authorised

persons

who must carry out a suitable check of the gas system, install

the appliance, set it functioning and carry out an inspection test.

INSTRUCTIONS FOR THE USER: these contain user advice,
description of the commands and the correct procedures for cleaning
and maintenance of the appliance.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Introduction; INSTRUCTIONS FOR SAFE AND PROPER USE

Introduction 4 1. INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE HOB. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING THE HOB. IN...

Page 3 - The manufacturer declines all responsibility; for damage to

Introduction 5 THE IDENTIFICATION PLATE, WITH TECHNICAL DATA, SERIAL NUMBER AND MARKING IS CLEARLY VISIBLE UNDER THE CASING. THE DUPLICATE DATA PLATE MUST BE ATTACHED TO AN ADJACENT SURFACE. BEFORE CONNECTING THE DEVICE, MAKE SURE THAT IT HAS BEEN REGULATED FOR THE TYPE OF GAS THAT WILL FEED IT, CHE...

Page 4 - Instructions for the installer; POSITIONING OF THE HOB; It is the law that all gas appliances are installed by; Attachment to support structure; from the; on the inner side

Instructions for the installer 6 2. POSITIONING OF THE HOB It is the law that all gas appliances are installed by authorised persons . Clearance around the appliance must comply with the requirements of AS5601. The following operation requires building and/or carpentry work so must be carried out by...

Other Smeg Hobs Models