Smeg SE264SGH3 - User Manual
Smeg SE264SGH3 Hob – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Introduction; INSTRUCTIONS FOR SAFE AND PROPER USE
- Page 4 – Instructions for the installer; POSITIONING OF HOB; be carried out by a competent tradesman.; Attachment to support structure
- Page 6 – ELECTRICAL CONNECTION; Do not use reducers, adapters or shunts.; The manufacturer will not be liable; for any damage to persons or
- Page 7 – GAS CONNECTION; Connection to LPG
- Page 8 – Ventilation of rooms
- Page 9 – ADAPTATION TO DIFFERENT TYPES OF GAS; Before performing any cleaning or maintenance work, detach the; Removing the hob; remove the screws and the nuts A that secure the burner supports; lift the hob from its seat
- Page 10 – Regulation for LPG
- Page 11 – Regulation for natural gas; Regulation of primary air; Referred to distance “X” in mm.
- Page 12 – FINAL OPERATIONS; Regulation of minimum for natural gas
- Page 13 – Arrangement of burners on hob; Lubrication of gas taps
- Page 14 – Instructions for the user; USING THE HOB; Ignition of the burners
- Page 15 – Practical advice for using the burners; Using a griddle plate; A few precautions are necessary if you wish to use a griddle plate:; Electric elements; Turning on electric elements
- Page 16 – Using the electric elements; WARNING; To use correctly remember to:
- Page 17 – CLEANING AND MAINTENANCE; Cleaning; Never use a steam jet to clean the appliance.; Regular daily cleaning of the hob; Rinse thoroughly and dry with a soft cloth or deerskin.
- Page 18 – Cleaning of cooking hob components; CAUTION: do not wash these components in a dishwasher.; Ignition plugs and safety devices
Index
INSTRUCTIONS FOR SAFE AND PROPER USE _______________ 22
POSITIONING OF HOB ___________________________________ 24
ELECTRICAL CONNECTION ______________________________ 26
GAS CONNECTION ______________________________________ 27
ADAPTATION TO DIFFERENT TYPES OF GAS _______________ 29
FINAL OPERATIONS _____________________________________ 32
USING THE HOB ________________________________________ 34
CLEANING AND MAINTENANCE ___________________________ 37
THESE INSTRUCTIONS ARE VALID ONLY FOR END USER COUNTRIES WHOSE
IDENTIFICATION SYMBOLS APPEAR ON THE COVER OF THIS MANUAL.
INSTRUCTIONS FOR THE INSTALLER: these are for the
qualified
technician
who must carry out a suitable check of the gas system,
install the appliance, set it functioning and carry out an inspection test.
INSTRUCTIONS FOR THE USER: these contain user advice,
description of the commands and the correct procedures for cleaning
and maintenance of the appliance.
21
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Introduction 1. INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE COOKING HOB. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING THE C...
Instructions for the installer 24 2. POSITIONING OF HOB The following operation requires building and/or carpentry work so must be carried out by a competent tradesman. Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminated wood as long as they a...
Instructions for the installer 26 3. ELECTRICAL CONNECTION Make sure that the voltage and capacity of the power line conform to the data shown on the plate located under the casing. Do not remove this plate for any reason. The plug on the end of the supply cable and the wall socket must be the same ...
