Smeg SAI64 - User Manual

7 DESCRIPTION OF THE APPLIANCE Technical characteristics * The given power may change according to the dimensions and material of the pan. Control panel Type Total Power Position of the heating zone Diameter Nominal Power* 1 st Booster Power* 2 nd Booster Power* Minimum diameter detection SAI64 SAI7...

8 USE OF THE APPLIANCE Display Display Designation Description 0 Zero The heating zone is activated. 1…9 Power level Selection of the cooking level. U No pan detection No pan or inadequate pan. A Heat accelerator Automatic cooking. E Error message Electronic failure. H Residual heat The heating zone...

11 • To stop the cooking time: Action Control panel Display Select the Timer Press simultaneously key [ - ] and [ + ] Timer display on from the timer until the desired display is on Stop the time Press key [ - ] from the timer [ 000 ] If several timers are activated, repeat the process. • Egg timer ...

13 COOKING ADVICES Pan quality Adapted materials: steel, enamelled steel, cast iron, ferromagnetic stainless-steel, aluminium with ferromagnetic bottom. Not adapted materials: aluminium and stainless-steel without ferromagnetic bottom, cupper, brass, glass, ceramic, porcelain. The manufacturers spec...

14 Examples of cooking power setting (the values below are indicative) 1 to 2 Melting Reheating Sauces, butter, chocolate, gelatine Dishes prepared beforehand 2 to 3 Simmering Defrosting Rice, pudding, sugar syrup Dried vegetables, fish, frozen products 3 to 4 Steam Vegetables, fish, meat 4 to 5 Wat...

15 The control panel displays [ E ]: • The electronic system is defective. • Disconnect and replug the hob. • Call after sales One or all cooking zone cut-off: • The safety system functioned. • You forgot to cut-off the cooking zone for a long time. • One or more sensitive keys are covered. • The pa...

16 INSTALLATION INSTRUCTIONS The installation must be performed by a qualified electrical contractor. How to stick the gasket: The gasket supplied with the hob avoids all infiltration of liquids in the cabinet. His installation has to be done carefully, in conformity of the following drawing. Fittin...

17 ELECTRICAL CONNECTION • The installation of this appliance and the connection to the electrical network should be entrusted only to an electrician perfectly to the fact of the normative regulations and which respects them scrupulously. • Protection against the parts under tension must be ensured ...

18 Connection of the hob The ceramic hob can be connected in different ways: Monophase 230V~1P+N Biphase 400V~2P+N Setting up the configurations: For the various kinds of connection, use the brass bridges which are in the box next the terminal Monophase 230V~1P+N Put the 1 st bridge between terminal...

Warranty THIS WARRANTY IS VALID IN AUSTRALIA ONLY Note: Please complete the following details when you have unpacked the product and retain this card with the purchase invoice or sales docket. Warranty: This product is covered by a Warranty in addition to all rights available to you by statute. Our ...