Smeg PGF75-2 - Manual

Smeg PGF75-2

Smeg PGF75-2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
Page: / 16

Table of Contents:

  • Page 2 – Introduction; INSTRUCTIONS FOR SAFE AND PROPER USE
  • Page 3 – The manufacturer declines all liability for injury; to persons or animals
  • Page 4 – Instructions for the installer; POSITIONING OF THE HOB
  • Page 5 – Attachment to support structure, flush-mounting model
  • Page 6 – Apply a layer of “waterproof primer” to the milled surface.
  • Page 8 – Electrical connection; Do not; located at an easily accessible position near the appliance.; The manufacturer declines all liability; for injury to persons or animals
  • Page 9 – Ventilation requirements
  • Page 10 – Gas connection; rigid copper pipe; Connection to LPG
  • Page 11 – ADJUSTMENT TO DIFFERENT TYPES OF GAS; The hob is set for; Replacement of nozzles on the hob; Replace the burners in the correct position.
  • Page 12 – Burner and nozzle characteristics table; BURNERS; Auxiliary
  • Page 13 – FINAL OPERATIONS; Regulation of minimum for town gas and natural gas; This operation must be done
  • Page 14 – Instructions for the user; USING THE HOB; Ignition of the burners; are aligned with the ignition plugs and the
  • Page 15 – Practical advice for using the burners
  • Page 16 – CLEANING AND MAINTENANCE; Before any intervention, disconnect the appliance from the mains.; Cleaning the stainless steel; Routine daily cleaning; To clean and preserve the stainless steel surfaces, always use; only; pour the product on a damp cloth and wipe the surface, rinse; Food stains or residues; Cleaning of cooking hob components; before remounting; align with burner pins
Loading the manual

Summary

1

INSTRUCTIONS FOR SAFE AND PROPER USE_______________ 20

2

POSITIONING OF THE HOB _______________________________ 22

3

ADJUSTMENT TO DIFFERENT TYPES OF GAS _______________ 29

4

FINAL OPERATIONS _____________________________________ 31

5

USING THE HOB ________________________________________ 32

6

CLEANING AND MAINTENANCE ___________________________ 34















THESE INSTRUCTIONS ARE VALID ONLY FOR END USER COUNTRIES WHOSE
IDENTIFICATION SYMBOLS APPEAR ON THE COVER OF THIS MANUAL.

INSTRUCTIONS FOR THE INSTALLER: these are for the

qualified

technician

who must carry out a suitable check of the gas system,

install the appliance, set it functioning and carry out an inspection test.

INSTRUCTIONS FOR THE USER : these contain user advice,
description of the commands and the correct procedures for cleaning
and maintenance of the appliance.

19

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Introduction; INSTRUCTIONS FOR SAFE AND PROPER USE

Introduction 1 INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE HOB. WE ADVISE READING THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING THE HOB. ALSO ...

Page 3 - The manufacturer declines all liability for injury; to persons or animals

Introduction THE APPLIANCE DATA PLATE, WITH TECHNICAL DATA, REGISTRATION NUMBER AND BRAND NAME, IS POSITIONED AT A VISIBLE POINT UNDER THE SAFETY COVER. THE DATA PLATE ON THE PROTECTIVE COVER MUST NEVER BE REMOVED . DO NOT PUT PANS WITHOUT PERFECTLY PERFECTLY SMOOTH AND FLAT BOTTOMS ON THE HOB PANST...

Page 4 - Instructions for the installer; POSITIONING OF THE HOB

Instructions for the installer 22 2 POSITIONING OF THE HOB The following operation requires building and/or carpentry work so must be carried out by a competent tradesman. Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminated wood, as long as th...

Other Smeg Models