Page 2 - Contents
Contents 1. Description of the controls________________________________ 18 2. Troubleshooting _______________________________________ 30 Thank you for choosing one of our products.You are advised to read this manual carefully; it contains all theinformation you need about the right conditions for th...
Page 3 - User instructions; Description of the controls
User instructions 1. Description of the controls 1.1 Front panel All the dishwasher control are grouped on the front panel. 1 ON/OFF BUTTON 2 SELECTION PROGRAMS BUTTONS (P1...P5) 3 DELAY PROGRAM BUTTON (on some models only) ½ LOAD WASH BUTTON (on some models only) 4 "3/1" OPTION BUTTON (on s...
Page 4 - Only; run the soak program with half loads.; except the soak; temperatures, and the type and amount of dishes.
User instructions For AAA 12 place-settings models only (see energy label) DURATION CONSUMPTION PROGRAM SELECTION TYPE AND GRADE DIRT PROGRESS PROGRAM MINUTES (2) WATER LITRES (1) POWERKWh (2) SOAK PANS AND DISHES IN WAITING OF COMPLETING THE LOAD Cold prewash 15 6 0,03 QUICK DISHES NOT MUCH DIRTY A...
Page 7 - TABLE FOR CERTIFICATION BODIES; Before starting a washing program make sure that:; LIGHTING
User instructions TABLE FOR CERTIFICATION BODIES Reference standard EN 50242 Reference program (*) Program BIO (P3+P1) - models AAA-AAB (*) Program ECO (P3) - models BAB Load 12 place-settings Type of detergent B Amount of detergent 30 g Rinse aid setting 5/6 1.2 Washing programs The dishwasher is e...
Page 8 - PROGRAMMING
User instructions PROGRAMMING In this model of dishwasher, all programming procedures can only becarried out with the door closed. As long as the door is open, the PROGRAMS lights (7) and PHASES/PROGRAM lights (10) will remain off. SELECTION PROGRAM The program selection is possiblethrough the relat...
Page 9 - END PROGRAM
User instructions END PROGRAM When the program finishes, a buzzer soundsbriefly and all the PHASES/PROGRAM lights (10) flash. Press any of the SELECTION PROGRAMS buttons (2) , stops the light flashins, and the dishwasher is now ready to perform a new cycle;opening and shutting the door or switching ...
Page 10 - ANNULLING A PROGRAM; ”. The program will resume from the point in; ⁄2 LOAD; program the other basket
User instructions ANNULLING A PROGRAM To annul the program in progress, it must first be interrupted (see“ I NTERRUPTION OF A PROGRAM ”). Now press buttons P1 + P2 simultaneously and the first three program lights will come on. In case that the door is opened during the operation, to the next doorcl...
Page 11 - PROGRAM DELAY
User instructions "3/1" OPTION BUTTON (on some models only)(available in all programs except the soak program) By pressing the button (4) you activate the " 3/1 " option, confirmed when the relative light comes on. This option has been studied for the use ofdishwashing powder or tabl...
Page 12 - To set the delay once the program has started
User instructions To set the delay once the program has started , proceed as follows. If the program you wish to carry out is the same as the one alreadyin progress: • press the START/PAUSE button (5) for a few seconds, until the PHASES/PROGRAM lights (10) come on; • annul the program in progress (s...
Page 13 - TO SAVE ON ENERGY! ... AND PROTECT THE ENVIRONMENT; REMOVING THE DISHES; At the end of the washing program, wait at least; advisable; to unload the lower basket first, and then the
User instructions TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT • Always try to run the dishwasher fully loaded . • Do not wash the dishes in running water. • Use the washing program that is most appropriate for each type of load. • Do not carry out any preliminary rinsing. • If available, connec...
Page 14 - ADJUSTING THE WATER SOFTENING SYSTEM; inside the plastic locking ring located on the; WATER HARDNESS TABLE
User instructions ADJUSTING THE WATER SOFTENING SYSTEM The dishwasher is equipped with an device for the user to adjust thewater softening system according to the hardness of the water supply. According to the machine model, the selector which acts on theadjustment may be located: • inside the plast...
Page 15 - When an alrm is present, all the; PROGRAM; lights; CODE; The appliance
User instructions 2. Troubleshooting In case of a malfunction, the dishwasher will identify the program byswitching on a combination of lights. When an alrm is present, all the PROGRAM lights (7) come on, while the PHASES/PROGRAM lights (10) identify the error code: CODE PHASES LIGHTS DESCRIPTION E1...
Page 16 - INSTRUCTION MANUAL
INSTRUCTION MANUAL W W A A R R N N I I N N G G S S A A N N D D R R E E C C O O M M M M E E N N D D A A T T I I O O N N S S , , G G U U I I D D E E F F O O R R T T H H E E U U S S E E O O F F B B A A S S K K E E T T S S A A N N D D F F O O R R C C L L E E A A N N I I N N G G D D I I S S H H W W A A S...
Page 17 - INSTALLATION INSTRUCTIONS: these are intended for the
Contents 1. Safety and operating instructions __________________________ 30 2. Installation and hook-up _________________________________ 34 3. Operating instructions ___________________________________ 38 4. Cleaning and maintenance _______________________________ 51 Thank you for choosing one of o...
Page 18 - Safety instructions; Safety and operating instructions
Safety instructions 1. Safety and operating instructions THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE: IT MUSTALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER. BEFOREUSING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONSCONTAINED IN THIS MANUAL.INSTALLATION MUST BE PERFORMED BY A QUALIFIE...
Page 19 - EUROPEAN DIRECTIVE; WEEE; THE APPLIANCE IS INTENDED FOR USE BY ADULTS.
Safety instructions OBSOLETE APPLIANCES MUST BE RENDERED UNUSABLE. CUT OFF THEMAINS POWER CORD AFTER UNPLUGGING IT FROM THE WALL OUTLET,AND MAKE SAFE ANY COMPONENTS WHICH MIGHT BE DANGEROUS FORCHILDREN (LOCKS, DOORS, ETC.). THIS APPLIANCE IS MARKED ACCORDING TO THE EUROPEAN DIRECTIVE 2002/96/EC ON W...
Page 20 - AQUASTOP MODELS
Safety instructions DO NOT INTRODUCE SOLVENTS SUCH AS ALCOHOL OR TURPENTINEWHICH MAY CAUSE AN EXPLOSION. DO NOT LOAD DISHES THAT ARE SOILED WITH ASH, WAX OR PAINTS. LEANING OR SITTING ON THE DISHWASHER DOOR WHEN OPEN MAYCAUSE THE APPLIANCE TO OVERTURN, PUTING PEOPLE AT RISK.NEVER LEAVE THE DISHWASHE...
Page 21 - DO NOT ATTEMPT TO REPAIR THE; The manufacturer declines all responsibility; for damage to persons or property
Safety instructions IMMEDIATELY AFTER INSTALLING THE DISHWASHER, PERFORM A QUICKTEST OF THE APPLIANCE FOLLOWING THE INSTRUCTIONS BELOW. IFTHE DISHWASHER FAILS TO OPERATE CORRECTLY, DISCONNECT ITFROM THE ELECTRICAL POWER SUPPLY AND CALL THE NEARESTTECHNICAL SERVICE CENTRE. DO NOT ATTEMPT TO REPAIR TH...
Page 22 - Installation instructions
Installation instructions 2. Installation and hook-up Remove the polystyrene basket retainers.Position the appliance in the desired place of installation. The back orsides of the dishwasher may be placed up against walls or otherfurniture units. If the dishwasher is installed near a heat source, fit...
Page 23 - Water supply connection; Preventing the risk of clogging or damage:
Installation instructions 2.1 Water supply connection Preventing the risk of clogging or damage: if the water pipe is new or has not been used for a long time, before connecting to the water supplycheck that the water is clear and free of impurities, to prevent damage tothe appliance. The dishwasher...
Page 24 - Electrical connection and precautions; DO NOT USE ADAPTORS OR SHUNT CONNECTIONS; IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD:; QUALIFIED TECHNICIAN
Installation instructions 2.2 Electrical connection and precautions CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCHTHE RATINGS ON THE NAME PLATE OF THE APPLIANCE POSITIONED ONTHE INNER EDGE OF THE DOOR. THE PLUG ON THE SUPPLY CORD AND THE CORRESPONDING SOCKETOUTLET MUST BE OF THE SAME TY...
Page 25 - WHEN CLEANING AND MAINTAINING THE APPLIANCE:; THIS APPLIANCE MUST BE EARTHED.; Fuse replacement; The fuse cover must be refitted when changing a fuse
Installation instructions WHEN CLEANING AND MAINTAINING THE APPLIANCE: BEFORE CARRYING OUT ANY WORK, ALWAYS UNPLUG THE APPLIANCEFROM THE ELECTRICAL SUPPLY OR SWITCH OFF THE ALL-POLEDISCONNECTION DEVICE. FOR GREAT BRITAIN ONLY: THIS APPLIANCE MUST BE EARTHED. Fuse replacement If the mains lead of thi...
Page 26 - Operating instructions; Adjust the water softening system; Using the water softening system; 0 washing cycles; container can hold approximately
User instructions 3. Operating instructions Once the dishwasher has been correctly installed, prepare for use asfollows: • Adjust the water softening system; • Add the regenerating salt; • Add the rinse aid and detergent. 3.1 Using the water softening system The amount of scale contained in thewater...
Page 27 - Using the rinse aid and detergent dispensers; detergent; is on the left, and the; rinse aid dispenser
User instructions • Do not use table salt as it contains insoluble substances which, over time, may damage the water softening system. • When necessary, refill the regenerating salt container before starting the washing program . In this way, the excess saline solution will be immediately removed by...
Page 28 - ADDING THE RINSE AID; Rotate the container cap anticlockwise by 1⁄4 of a turn and remove it.; ADJUSTING THE RINSE AID DISPENSER SETTING; The amount of rinse aid must be
User instructions ADDING THE RINSE AID The rinse aid helps the dishes dry faster andprevents the formation of scale deposits andstaining; it is automatically added to the waterduring the final rinse cycle, from the containersituated on the inner side of the door. • Open the door. • Rotate the contai...
Page 29 - ADDING THE DETERGENT; . Add the detergent and close the cap
User instructions ADDING THE DETERGENT To open the detergent dispenser cap, lightly pressthe button P . Add the detergent and close the cap carefully.During the washing cycle, the dispenser will beopened automatically. • When a program with hot prewash is selected (see program table), extra detergen...
Page 31 - General warnings and recommendations; to be washed and
User instructions 3.3 General warnings and recommendations Before using the dishwasher for the first time, it is advisable to read thefollowing recommendations concerning dish types to be washed and their loading . There are generally no constraints on the washing of domestic dishes,but in certain c...
Page 33 - Using the baskets; The dishwasher has a capacity of; EN 50242 STANDARD LOADS FOR CERTIFICATION BODIES; LOWER BASKET; The
User instructions 3.4 Using the baskets The dishwasher has a capacity of 12 place-settings , including serving dishes. EN 50242 STANDARD LOADS FOR CERTIFICATION BODIES LOWER BASKET UPPER BASKET UPPER BASKET for AAA models only (see energy label) The upper basket must be set in the low position.
Page 34 - With fixed supports; LOADING THE LOWER BASKET
User instructions LOWER BASKET The lower basket receives the full force of the lower spray arm, andshould therefore be used for the “toughest” items with a heavier degreeof soiling. All types and combinations of loads arepermitted, provided that the dishes, pots andpans are arranged with all the soi...
Page 35 - CUTLERY BASKET; , offering a choice of possible combinations to allow
User instructions CUTLERY BASKET The cutlery should be arranged in an orderly manner inside the basket,with the handles pointing downwards. Take care during loading to avoidinjury from the knife blades. The basket is suitable for all types of cutlery,except those long enough to interfere with the up...
Page 36 - UPPER BASKET; for AAA models only
User instructions UPPER BASKET It is recommended to load the upper basket with small- or medium-sizeditems such as glasses, small plates, tea or coffee cups, shallow bowlsand light objects made from heat resistant plastic. If the upper basket isused in the lowermost position, it can also be loaded w...
Page 37 - LOADING THE UPPER BASKET
User instructions LOADING THE UPPER BASKET Load plates facing forward; cups, bowls etc. must always be facingdownwards. The left-hand side of the basket can be loaded with twolayers of cups and glasses. The centre can be filled with plates and side-plates, fitted upright into the supports provided. ...
Page 38 - ADJUSTING THE UPPER BASKET
User instructions ADJUSTING THE UPPER BASKET The upper basket can be adjusted in two positions , according to the user’s needs and according to the height of the dishes in the lowerbasket. Proceed as follows. Pull-out version: • pull out the right-hand basket guide ; • remove the stop, first releasi...
Page 39 - Cleaning and maintenance; General warnings and recommendations
User instructions 4. Cleaning and maintenance Before carrying out any work, always disconnect the appliancefrom the electrical power supply. 4.1 General warnings and recommendations Avoid the use of acidic or abrasive detergents. Clean the outer surfaces and door-lining of the dishwasher regularlyus...
Page 40 - CLEANING THE FILTER UNIT; It is advisable to periodically inspect the centre filter
User instructions CLEANING THE FILTER UNIT • It is advisable to periodically inspect the centre filter C and, if necessary, to clean it. To remove the filter, grip the tabs, turn themanticlockwise and lift upwards; • push the centre filter D from the underside to remove it from the micro-filter: • s...
Page 42 - If the dishes fail to dry or remain dull, check that:; 2 Standard place settings; Water supply pressure; See rating plate
User instructions If the dishes fail to dry or remain dull, check that: • there is rinse aid inside the special container; • the rinse aid dispenser setting is correct; • the detergent used is of good quality and has not lost itseffectiveness (for example, through incorrect storage, with the boxleft...
